Evaluation of the quality of composite diamond-containing materials by their electrical and thermal conductivity
Source abstract
Abstract
The serviceability of hot-pressed diamond-containing composite materials for application in tools depends substantially on the presence of microdefects, in particular, the residual porosity of the metal matrix, damaged diamond grains, and imperfect diamond-matrix interfaces. Experimental investigations of these defects are very difficult due to their small size and nonstandard shape as well as a strong inhomogeneity of the specimens. We propose an alternative technique of the nondestructive testing of the quality of diamond-containing composite materials, which includes measurement of the electrical resistance and thermal conductivity of a diamond-containing composite and analysis of the data obtained by the methods of composite mechanics. The quantitative estimate of quality is given in terms of two dimensionless parameters. The first of them, 0 < K < 1, reflects the quality of a sintered metal matrix, whereas the second, 0 < R < 1, is an aggregate measure of the integrity of diamond grains and the degree of perfection of the interfaces in a composite. The good agreement between theory and experiment corroborates the efficiency of this technique and the accuracy of the presented data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Material Mechanics · Tunneling and Rock Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. G. S. Samoilovich (editor), Nondestructive Testing of Metals and Products: Handbook [in Russian], Mashinostroenie, Moscow (1976).
2. TU88_of Ukraine 90.583-84. Inserts of a Superhard Composite Material for Boring Tools [in Russian].
3. TI 25000.20253. Superhard Composite Diamond-Containing Material “Tvesal” [in Russian].
4. N. V. Novikov, A. L. Maistrenko, and V. N. Kulakovskii, Breaking Strength of Superhard Composite Materials [in Russian], Naukova Dumka, Kiev (1993).
5. N. V. Tsypin, Wear Resistance of Composite Diamond-Containing Materials for Boring Tools [in Russian], Naukova Dumka, Kiev (1983).
6. S. A. Ivanov, A. L. Vetrov, A. L. Maistrenko, and V. I. Kushch, “A procedure and a device for measurements of the thermal conductivity of composite diamond-containing materials on a metallic binder,” Sverkhtv. Mater., No. 2, 44–49 (2003).
7. V. I. Kushch, S. A. Ivanov, and A. L. Maistrenko, “Conductance of composite diamond-containing materials with imperfect interfaces,” in: Proc. Int. Sci. Tech. Conf. “Superhard Materials at the Dawn of Millenia: Production, Properties, and Application” (July 4–6, 2001) [in Russian], Institute of Superhard Materials, Ukr. Acad. Sci., Kiev (2001), pp. 79–80.
8. T. D. Ositinskaya, A. P. Podoba, and S. V. Shmegera, “Influence of point defects on the thermal conductivity of diamond single crystals: state of the art,” Diamond Related Mater., No. 2, 1500–1504 (1993).
9. V. I. Tumanov, Properties of Alloys of the System Tungsten Carbide-Cobalt: Handbook [in Russian], Metallurgiya, Moscow (1971).
10. A. S. Okhotin (editor), Thermal Conductivity of Solids: Handbook [in Russian], Énergoatomizdat, Moscow (1984).
11. V. I. Kushch, Stressed State and Macroscopic Thermoelastic Properties of Piecewise Homogeneous Bodies with Spheroidal Interfaces [in Ukrainian], Author’s Abstract of Doctoral-Degree Thesis (Phys. Math), Institute of Mechanics, Ukr. Acad. Sci., Kyiv (1998).
12. Y. Benveniste, “Effective thermal conductivity of composites with a thermal contact resistance between the constituents: non-dilute case,” J. Appl. Phys., 61, 2840–2843 (1987).10.1063/1.337877 ↗
13. H. Cheng and S. Torquato, “Effective conductivity of periodic arrays of spheres with interfacial resistance,” Proc. Roy. Soc. Lond., A453, 145–161 (1997).10.1098/rspa.1997.0009 ↗
14. D. P. H. Hasselman and L. F. Johnson, “Effective thermal conductivity of composites with interfacial thermal barrier resistance,” J. Compos. Mater., 21, 508–515 (1987).10.1177/002199838702100602 ↗
15. C.-W. Nan, X.-P. Li, and R. Birringer, “Inverse problem for composites with imperfect interface: determination of interfacial thermal resistance, thermal conductivity of constituents and microstructural parameters,” J. Am. Ceram. Soc., 83, No. 4, 848–854 (2000).10.1111/j.1151-2916.2000.tb01284.x ↗
16. A. Simchi, H. Danninger, and B. Weiss, “Microstructural modelling of electrical conductivity and mechanical properties of sintered ferrous materials,” Powder Met., 43, No. 3, 219–227 (2000).10.1179/003258900665970 ↗
17. V. G. Gargin, “Effect of heating time on strength of synthetic diamonds,” Sverkhtv. Mater., No. 6, 23–25 (1980).
18. V. G. Gargin, “Effect of melting processes and interaction of inclusions with the matrix on the mechanism of thermal weakening of diamonds,” in: Adhesion and Contact Interaction of Melts [in Russian], Naukova Dumka, Kiev (1988), pp. 136–140.
19. Chemical Encyclopaedia [in Russian], Vol. 2, Sovetskaya Éntsiklopediya, Moscow (1990).