Methods for the construction of the diagrams of fatigue crack-growth rate of materials
Source abstract
Abstract
We study different parameters used for the construction of the diagrams of fatigue crack-growth rate of materials in the force, deformation, and energy approaches and tested for 08kp low-strength steel and 60 high-strength steel. The applicability of the dependences known from the literature for the evaluation of the crack-tip opening displacement and local strain energy at the crack tip is analyzed. It is shown that the range of local strains Δe* and the total range of dissipation of local energy in a loading cycle ΔW t * specify the fatigue crack-growth rate in the material and that the da / dN−Δe* and da / dN−ΔW t * diagrams are more sensitive to the structural and mechanical characteristics of the materials than the ordinary da / dN−ΔK diagrams.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. V. V. Panasyuk (editor), Fracture Mechanics and Strength of Materials. A Handbook [in Russian], Vol. 4: O. N. Romaniv, S. Ya. Yarema, G. N. Nikiforchin, et al., Fatigue and Cyclic Crack-Growth Rate of Structural Materials, Naukova Dumka, Kiev (1990).
2. RD 50-345-82. Methodical Recommendations. Strength Analyses and Tests in Machine Building. Methods for Mechanical Testing of Metals. Determination of the Characteristics of Crack Rate (Fracture Toughness) under Cyclic Loading [in Russian], Izd. Standartov, Moscow (1983).
3. S. Ya. Yarema, “A method for the determination of crack-growth rates and the characteristics of crack rate under cyclic loading,” Fiz-Khim. Mekh. Mater., 30, No. 3, 137–152, No. 4, 121–136, No. 6, 101–112 (1994), 31, No. 1, 145–156 (1995)
4. “ASTM Standard E647-83. Standard test method for constant-load-amplitude fatigue crack growth rates above 10−8 m/cycle,” in: Annual Book of ASTM Standards, Vol. 03.01, ASTM, Philadelphia (1983), pp. 739–759.
5. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM Standards. E647-93.
6. W. Elber, “Fatigue crack closure under cyclic tension,” Eng. Fract. Mech., 2, No. 1, 37–45 (1970).10.1016/0013-7944(70)90028-7 ↗
7. O. N. Romaniv, “Structural concept fatigue thresholds for structural alloys,” Fiz.-Khim. Mekh. Mater., 22, No. 1, 106–116 (1986).
8. S. Ya. Yarema, “On the foundations and some problems of fatigue fracture mechanics,” Fiz.-Khim. Mekh. Mater., 23, No. 5, 17–29 (1987).
9. V. T. Troshchenko, V. V. Pokrovskii, and V. G. Kaplunenko, “Influence of the sizes of specimens on the characteristics of cyclic crack-growth rate of heat-resistant steels. Part 1,” Probl. Prochn., No. 4, 3–9 (1986), Part 2, Probl. Prochn., No. 4, 13–18 (1986).
10. V. V. Panasyuk, Mechanics of Quasibrittle Fracture of Materials [in Russian], Naukova Dumka, Kiev (1991).
11. BS 5762 (1979), Methods for Crack Opening Displacement (COD) Testing, The British Standards Institution, London (1979).
12. J. A. Rice, “Mathematical methods in fracture mechanics, in: H. Liebowitz (editor), Fracture. An Advanced Treatise, Vol. 2, Academic Press, New York (1971), pp. 204–335.
13. E. Czoboly, B. Csizmazia, and I. Havas, “Experimental determination of plastic zones,” Fiz.-Khim. Mekh. Mater., 32, No. 1, 99–110 (1996).
14. Y. Furuya and H. Shimada, “Local crack-tip strain approach to fatigue crack propagation,” Eng. Fract. Mech., 26, No. 3, 349–356 (1987).10.1016/0013-7944(87)90017-8 ↗
15. D. S. Dawicke and M. A. Satton, “CTOA and crack-tunneling measurements in thin sheet 2024-T3 aluminum alloy,” Exp. Mech., 34, 357–368 (1994).10.1007/BF02325151 ↗
16. P. S. Theocaris and E. Marketos, “Elastic-plastic analysis of perforated thin strips of a strain-hardening material,” J. Mech. Phys. Solids., 12, No. 6, 377–390 (1964).10.1016/0022-5096(64)90033-X ↗
17. O. P. Ostash and V. V. Panasyuk, “On the theory of initiation of growth of fatigue cracks,” Fiz.-Khim. Mekh. Mater., 24, No. 1, 13–21 (1988).
18. O. P. Ostash and V. V. Panasyuk, “A unified approach to fatigue macrocrack initiation and propagation,” Int. J. Fatigue, 25, No. 8, 703–708 (2003).10.1016/S0142-1123(03)00054-9 ↗
19. O. Kolednic and P. Kutlesa, “On the influence of specimen geometry on the critical crack-tip opening displacement,” Eng. Fract. Mech., 33, 215–223 (1989).10.1016/0013-7944(89)90025-8 ↗
20. C. R. Pratap and R. K. Pandey, “A composite crack profile model for CTOD determination. 2. An experimental application to a small-scale yielding situation,” Eng. Fract. Mech., 24, 539–552 (1986).10.1016/0013-7944(86)90228-6 ↗
21. V. V. Panasyuk, H. S. Ivanyts’ka, O. P. Ostash, and E. M. Kostyk, “Theoretical and experimental determination of the opening displacement of a notch in a deformed body,” Fiz.-Khim. Mekh. Mater., 31, No. 3, 83–90 (1995).
22. K.-H. Schwalbe and B. Neale, “A procedure for determining the fracture behavior of materials—the unified fracture mechanics test method EFAM FTP94,” Fatigue Fract. Eng. Mater. Struct., 18, 413–424 (1995).10.1111/j.1460-2695.1995.tb01185.x ↗
23. O. Ostash, I. Andreiko, R. Chepil’, et al., “Construction of the kinetic diagrams of fatigue fracture of materials in the deformation approach,” Mashynoznavstvo, No. 2, 33–36 (2007).
24. V. V. Panasyuk, O. P. Ostash, E. M. Kostyk, and R. V. Chepil’, “Deformation approach to the evaluation of the period of fatigue macrocrack initiation and propagation,” Fiz.-Khim. Mekh. Mater., 31, No. 5, 7–21 (1995).
25. O. P. Ostash and V. V. Panasyuk, “Fatigue process zone at notches,” Int. J. Fatigue, 23, No. 7, 627–636 (2001).10.1016/S0142-1123(01)00004-4 ↗
26. O. P. Ostash, “New approaches in fatigue fracture mechanics,” Fiz.-Khim. Mekh. Mater., 42, No. 1, 13–25 (2006).
27. J. Morrow, “Cyclic plastic strain energy and fatigue of metals,” ASTM Spec. Tech. Pub., 78, 45–87 (1965).
28. V. T. Troshchenko, Deformation and Fracture of Metals under High-Cycle Loading [in Russian], Naukova Dumka, Kiev (1981).
29. P. A. Fomichev and I. Yu. Trubchanin, “Equation of the contour and shape factor of the hysteresis loop,” Probl. Prochn., No. 3, 30–38 (1997).
30. E1820-01 Standard Test Method for Measurement of Fracture Toughness, ASTM (2001).
31. N. E. Dowling, “Geometry effects and J-integral approach to elastic-plastic fatigue crack growth,” in: Crack Fract., ASTM STP 601, Philadelphia (1976), pp. 19–32.10.1520/STP28635S ↗
32. G. A. Glinka, “Cumulative model of fatigue crack growth,” Int. J. Fatigue, 4, No. 2, 59–67 (1982).10.1016/0142-1123(82)90061-5 ↗
33. Y. Nakayama, N. Miura, Y. Takahashi, et al, “Development of fatigue and creep crack propagation law for 316FR stainless steel in consideration of FBR operating condition,” in: Fatigue, Fracture, and High Temperature Design Methods in Pressure Vessel and Piping, ASME, 365 (1998), pp. 191–198.
34. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, “Low-cycle fatigue behavior and mechanisms of a eutectic Sn-Pb solder 63Sn/37Pb,” Int. J. Fatigue, 24, 671–683 (2002).10.1016/S0142-1123(01)00186-4 ↗
35. M. Skorupa, S. Beretta, M. Carboni, and T. Machniewicz, “An algorithm for evaluating crack closure from local compliance measurements,” Fatigue Fract. Eng. Mater. Struct., 25, 261–273 (2002).10.1046/j.1460-2695.2002.00444.x ↗
36. O. Andreikiv, D. Rudavs’kyi, and Yu. Polyans’kyi, “Energy approach to the evaluation of the period of initiation of fatigue macrocrack in a hydrogenated material,” in: V. V. Panasyuk (editor), Fracture Mechanics and Strength of Structures [in Ukrainian], Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, Lviv (2004), pp. 95–100.
37. P. Yasnii and P. Marushchak, “Influence of the time of holding on the high-temperature cyclic crack-growth rate of a bimaterial,” in: V. V. Panasyuk (editor), Fracture Mechanics and Strength of Structures [in Ukrainian], Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, Lviv (2004), pp. 617–622.
38. R. Sunder, “On the hysteresis nature of variable-amplitude fatigue crack growth,” Int. J. Fatigue, 27, 1494–1498 (2005).10.1016/j.ijfatigue.2005.06.030 ↗
39. Y. Xiong, J. Katsuta, K. Kawano, and T. Sakiyama, “Characteristics of fatigue crack propagation behavior as identified by hysteresis loop at the crack tip,” Fatigue Fract. Eng. Mater. Struct., 29, No. 6, 454–463 (2006).10.1111/j.1460-2695.2006.01016.x ↗
40. M. Shata, “A procedure for the evaluation of cyclic crack-growth rate of materials in the energy approach,” in: V. V. Panasyuk (editor), Fracture Mechanics of Materials and Strength of Structures [in Ukrainian], Vol. 1, Kamenyar, Lviv (1999), pp. 133–136.
41. M. Szata and R. Fratczak, “Linearity and nonlinearity effects in crack propagation model,” in: V. V. Panasyuk (editor), Fracture Mechanics and Strength of Structures [in Ukrainian], Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, Lviv (2004), pp. 57–63.