journal article·2019-11

Influence of High Temperatures on the Mechanical Characteristics of 26H2MF and ST12T STEELS

W. Dudda

Materials Science· Volume 55· Issue 3
Publisher page

Abstract

We construct the stress-strain diagrams for 26H2MF and St12T turbogenerator steels in tension at high temperatures. A contactless optical-digital system is used to measure the elongation of the samples. The influence of temperature on the strength, ductility, and Young’s modulus of the tested steels is determined. It is shown that, at temperatures of up to 400°C, the 26H2MF steel has lower strength characteristics than the St12T steel. However, at higher temperatures, the strengths of these steels become almost identical.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Microstructure and Mechanical Properties of Steels · Engineering Diagnostics and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. P. J. Ennis and A. Czyrska-Filemonowicz, “Recent advances in creep-resistant steels for power plant applications,” Sadhana,28, Nos. 3-4, 709–730 (2003).10.1007/BF02706455 ↗
2. U. E. Klotz, C. Solenthaler, and P. J. Uggowitzer, “Martensitic-austenitic 9–12% Cr steels—alloy design, microstructural stability, and mechanical properties,” Mater. Sci. Eng. A,476, No. 1, 186–194 (2008).10.1016/j.msea.2007.04.093 ↗
3. ASTM E21-17 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials, ASTM International, West Conshohocken, PA (2017).
4. Ya. L. Ivanyts’kyi, Yu. V. Mol’kov, P. S. Kun, T. M. Lenkovs’kyi, and M. Wójtowicz, “Determination of the local strains near stress concentrators by the digital image correlation technique,” Fiz.-Khim. Mekh. Mater.,50, No. 4, 8–24 (2014); English translation: Mater. Sci.,50, No. 4, 488–495 (2015).10.1007/s11003-015-9746-7 ↗
5. Ya. L. Ivanyts’kyi, S. T. Shtayura, Yu. V. Mol’kov, and T. M. Lenkovs’kyi, “Influence of hydrogen on the fracture resistance of 65G sheet steel ,” Fiz.-Khim. Mekh. Mater.,47, No. 4, 36–40 (2011); English translation: Mater. Sci.,47, No. 4, 457–461 (2012).10.1007/s11003-012-9416-y ↗
6. Ya. L. Ivanyts’kyi, S. T. Shtayura, T. M. Lenkovs’kyi, and Yu. V. Mol’kov, “Determination of the parameters of crack resistance for 17G1S steel under transverse shear,” Fiz.-Khim. Mekh. Mater.,49, No. 5, 73–78 (2013); English translation: Mater. Sci.,49, No. 5, 637–643 (2014).10.1007/s11003-014-9657-z ↗
7. Yu. Du, Yu. V. Mol’kov, T. М. Lenkovs’kyi, and R. A. Koval’chuk, “Analysis of the stress-strain state of the process zone of a plate with central crack under biaxial loading,” Fiz.-Khim. Mekh. Mater.,53, No. 1, 78–83 (2017); English translation: Mater. Sci.,53, No. 1, 86–92 (2017).10.1007/s11003-017-0047-1 ↗
8. R. L. Klueh and A. T. Nelson, “Ferritic/martensitic steels for next-generation reactors,” J. Nuclear Mater.,371, No. 1, 37–52 (2007).10.1016/j.jnucmat.2007.05.005 ↗
9. B. Hopkinson, F. Rogers, and J. A. Ewing, “The elastic properties of steel at high temperatures,” Proc. Royal Soc. London, Ser. A,76, No. 512, 419–425 (1905).10.1098/rspa.1905.0045 ↗