Influence of Silicate Nucleation Agent Modified with Polyvinylpyrrolidone on the Morphology and Properties of Polypropylene
Source abstract
Abstract
According to the results of X-ray and complex thermogravimetric analyses, we establish the influence of nucleation agents based on polyvinylpyrrolidone and sodium liquid glass on the morphology of polypropylene. It is shown that the introduction of nucleation agents increases the degree of crystallinity of polypropylene and promotes a decrease in the sizes of crystallites. In this case, the most pronounced effect is exerted by the nucleation agent based on the codeposited polyvinylpyrrolidone and sodium liquid glass. It is also established that the changes in the structure of the material lead to the improvement of its physicomechanical and thermal properties, in particular, of the tensile strength, surface hardness, Vicat heat resistance, and Shram–Tsibrovsky high-temperature strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Y.-W. Mai and Zh.-Zh. Yu, Polymer Nanocomposites, Woodhead Publ., Boca Raton (2006).10.1533/9781845691127 ↗
2. M. L. Kerber, V. M. Vinogradov, and G. S. Golovkin, Polymeric Composite Materials [in Russian], Professiya, St. Petersburg (2008).
3. V. Levytskyi, D. Katruk, V. Kochubei, T. Humenets'kyi, L. Bilyi, and A. Masyuk, "Influence of polyvinylchloride on the chemical and thermal resistance of highly filled polyester composites," Fiz.-Khim. Mekh. Mater.,53, No. 3, 86-92 (2017)10.1007/s11003-017-0086-7 ↗
4. English translation:Mater. Sci.,53, No. 3, 385-391 (2017).
5. V. Mittal, “Polypropylene-layered silicate nanocomposites: Filler matrix interactions and mechanical properties,” J. Thermoplastic Comp. Mater.,20, No. 6, 575–599 (2007).10.1177/0892705707083636 ↗
6. D. Libster, A. Aserin, and N. Garti, “Advanced nucleating agents for polypropylene,” Polymer. Adv. Technol.,18, No. 9, 685–695 (2007).10.1002/pat.970 ↗
7. V. Levytskyj, Y. Laruk, T. Humenetsky, and J. Sikora, “The influence of polystyrene modifier and plasticizer nature on the properties of poly(vinyl chloride),” Chem. Chem. Technol.,9, No. 2, 199–203 (2015).10.23939/chcht09.02.199 ↗
8. V. Levytskyi, D. Katruk, A. Masyuk, T. Bialopiotrowicz, M. Bratychak, and N. Chopyk, “The effect of poly(vinyl chloride) modifier and filler nature on properties of polyester composites,” Chem. Chem. Technol.,12, No. 1, 53–57 (2018).10.23939/chcht12.01.053 ↗
9. V. Levytskyi, D. Katruk, A. Shybanova, L. Bilyi, and T. Humenetskyi, "Physicochemical properties of modified polyesterpolyvinylchloride compositions," Fiz.-Khim. Mekh. Mater.,52, No. 4, 100-105 (2016)10.1007/s11003-017-9990-0 ↗
10. English translation:Mater. Sci.,52, No. 4, 559-565 (2017).10.1007/s11003-017-9990-0 ↗
11. M. Blomenhofer, S. Ganzleben, D. Hanft, H. Schmidt, M. Kristiansen, P. Smith, K. Stoll, D. Mäder, and K. Hoffmann, “`Designer’ nucleating agents for polypropylene,” Macromolecules,38, No. 9, 3688–3695 (2005).10.1021/ma0473317 ↗
12. M. Tolinski, Additives for Polyolefins: Getting the Most out of Polypropylene. Polyethylene and TPO, William Andrew, Oxford (2015).
13. G. Wypych, Handbook of Nucleating Agents, ChemTec Publ., Ontario (2016).
14. G. Wypych and A. Wypych, Databook of Nucleating Agents, ChemTec Publ., Ontario (2016).
15. V. Levyts'kyi, А. Masyuk, Т. Bialopiotrowicz, L. Bilyi, and T. Humenetskyi, "Morphology and properties of thermoplastic composites with modified silicate fillers," Fiz.-Khim. Mekh. Mater.,54, No. 1, 53-58 (2018)10.1007/s11003-018-0157-4 ↗
16. English translation:Mater. Sci.,54, No. 1, 48-54 (2018).10.1007/s11003-018-0157-4 ↗
17. M. Rabiej and S. Rabiej, Analiza Rentgenowskich Krywych Dyfrakcyjnych Polymerów za Pomoca Programu Komputerowego WAXSFIT, Bielsko-Biała, Warszawa (2006).
18. J. L. White and D. D. Choi, Polyethylene, Polypropylene, and other Polyolefins [Russian translation], Professiya, St. Petersburg (2006).
19. V. Ye. Levytskyi, A. S. Masyuk, and O. V. Suberlyak, “Preparation and properties of polymer-silicate composites based on hydrophilic polymers,” Vopr. Khim. Khim. Tekhnol., No. 6, 68–74 (2017).