journal article·2004-09

Porosity and Corrosion Properties of Electrolyte Plasma Coatings on Magnesium Alloys

W. Dietzel, M. Klapkiv, H. Nykyforchyn, V. Posuvailo, C. Blawert

Materials Science· Volume 40· Issue 5
Publisher page

Abstract

It is shown that oxide-ceramic coatings on magnesium alloys are, in general, characterized by high corrosion resistance depending on the porosity of the coating. The surface topology of oxide-ceramic coatings on IMV2 and VMD10 alloys is studied to reveal discontinuities by using special procedures of immersion and electrochemical deposition. Craters detected as a specific feature of the topology of the coatings and not always through and, in this case, they do not affect the corrosion resistance of the alloys. Isolated pores are formed, most often around the craters, in the process of oxidation under the action of high thermal stresses. On the basis of the comparative analysis of various materials and corrosive media, it is possible to make a conclusion that the corrosion resistance of magnesium alloys with oxide-ceramic coatings in acid media is mainly determined by the chemical composition of the alloy. At the same time, in neutral media, it is determined by the porosity of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. H. Godard, W. Jepson, H. Bothwell, and R. Kane, The Corrosion of Light Metals, Wiley, New York (1967).
2. G. Song and A. Atrens, “Corrosion mechanisms of magnesium alloys,” Adv. Eng. Mater., No. 1, 11–33 (1999).
3. E. Ghali, W. Dietzel, and K. U. Kainer, “General and localized corrosion of magnesium alloys —A critical review,” J. Mater. Eng. Perform, 13, No.1, 7–23 (2004).10.1361/10599490417533 ↗
4. M. Klapkiv, D. Zaverbnyi, P. Sydor, and V. Posyvailo, “Properties of magnetic alloys with oxide-ceramic coatings in weakly acid electrolytes,” Fiz.-Khim. Mekh. Mater., 38, Special Issue No. 3, 577–981 (2002).
5. A. L. Yerokhin, X. Nie, A. Leyland, et. al., “Plasma electrolysis for surface engineering,” Surf. Coat. Technol. 122, 73–93 (1999).10.1016/S0257-8972(99)00441-7 ↗
6. H. M. Nykyforchyn, W. Dietzel, and M. D. Klapkiv, “Synthesis of oxide-ceramic coatings on magnesium alloys and their corrosion properties,” J. High. Temper. Mater. Proc., 7, No.2, 241–246 (2003).
7. H. M. Nykyforchyn, W. Dietzel, M. D. Klapkiv, and C. Blawert, “Corrosion properties of conversion plasma-coated magnesium alloys,” in: Magnesium, Sixth Internat. Conf. on Magnesium Alloys and Their Applications (Wolfsburg, Germany, December, 2003), Wolfsburg (2003), pp. 176–181.10.1002/3527603565.ch26 ↗
8. V. T. Yavorivskii, I. P. Mercalo, and M. D. Klapkiv, A Procedure of Application of Oxide Coatings to Aluminum Alloys. Patent of the Ukraine No.56482 A.