journal article·2023-04-03Open access

Novel single crystalline-like non-equiatomic TiZrHfNbTaMo bio-high entropy alloy (BioHEA) developed by laser powder bed fusion

Ozkan Gokcekaya, Takuya Ishimoto, Yuki Nishikawa, Yong Seong Kim, Aira Matsugaki, Ryosuke Ozasa, Markus Weinmann, Christoph Schnitter, Melanie Stenzel, Hyoung Seop Kim, Yoshitsugu Miyabayashi, Takayoshi Nakano

Materials Research Letters· Volume 11· Issue 4

Abstract

This study developed a non-equiatomic Ti28.33Zr28.33Hf28.33Nb6.74Ta6.74Mo1.55 super-solid solutionized BioHEA using laser powder bed fusion (LPBF) to reach the full potential as BioHEA. We succeeded in significant suppression of elemental segregation, thus, resulting in a single crystalline-like texture by activating layer-to-layer epitaxial growth. Relatively low Young’s modulus was achieved in the single crystalline-like BioHEA. Moreover, LPBF-fabricated BioHEA exhibited significantly higher yield stress (1355–1426 MPa) due to the effective solid solution hardening compared to as-cast counterpart with marked segregation (949 MPa), and good biocompatibility. This is first report achieving BioHEA with low modulus, excellent strength-ductility balance, and good biocompatibility via LPBF.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Osaka, Japan

Anisotropic Design and Additive Manufacturing Research Center, Osaka University, Osaka, Japan

Aluninium Research Center, University of Toyama, Toyama, Japan

TANIOBIS GmbH, Goslar, Germany

Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang, South Korea

Graduate School of Engineering, Osaka University, Osaka, Japan

Funding

CREST · Japan Science and Technology Agency

References (31)

Show source-provided references
1. 10.1016/j.actamat.2016.04.02910.1016/j.actamat.2016.04.029 ↗
2. 10.1016/j.pmatsci.2013.10.00110.1016/j.pmatsci.2013.10.001 ↗
3. 10.1080/21663831.2014.91269010.1080/21663831.2014.912690 ↗
4. 10.1016/j.scriptamat.2016.10.02810.1016/j.scriptamat.2016.10.028 ↗
5. 10.1016/j.jallcom.2018.04.08210.1016/j.jallcom.2018.04.082 ↗
6. 10.3390/e2105048310.3390/e21050483 ↗
7. 10.1016/j.scriptamat.2019.07.01110.1016/j.scriptamat.2019.07.011 ↗
8. 10.1016/j.msec.2019.11032210.1016/j.msec.2019.110322 ↗
9. 10.1080/21663831.2019.158459210.1080/21663831.2019.1584592 ↗
10. 10.1016/j.intermet.2019.10657210.1016/j.intermet.2019.106572 ↗
11. 10.1007/s12598-021-01938-310.1007/s12598-021-01938-3 ↗
12. 10.1016/j.scriptamat.2020.11365810.1016/j.scriptamat.2020.113658 ↗
13. 10.1080/00325899.2019.158445410.1080/00325899.2019.1584454 ↗
14. 10.1080/21663831.2018.147833210.1080/21663831.2018.1478332 ↗
15. 10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
16. 10.1016/j.addma.2022.10272610.1016/j.addma.2022.102726 ↗
17. 10.1016/j.scriptamat.2016.12.03810.1016/j.scriptamat.2016.12.038 ↗
18. 10.1016/j.actamat.2021.11687610.1016/j.actamat.2021.116876 ↗
19. 10.1007/s11837-021-04966-710.1007/s11837-021-04966-7 ↗
20. 10.1016/j.actamat.2010.09.00710.1016/j.actamat.2010.09.007 ↗
21. 10.1080/21663831.2016.123451610.1080/21663831.2016.1234516 ↗
22. 10.1016/j.actamat.2008.02.01710.1016/j.actamat.2008.02.017 ↗
23. 10.1016/j.jallcom.2022.16581210.1016/j.jallcom.2022.165812 ↗
24. 10.1063/1.496665910.1063/1.4966659 ↗
25. 10.1080/21663831.2018.151827610.1080/21663831.2018.1518276 ↗
26. 10.1016/j.matdes.2021.10954810.1016/j.matdes.2021.109548 ↗
27. 10.1016/j.addlet.2021.10001610.1016/j.addlet.2021.100016 ↗
28. Gokcekaya O · Addit Manuf · 2020 · 36 · 101624
29. 10.1016/j.actamat.2019.11.05710.1016/j.actamat.2019.11.057 ↗
30. 10.1080/21663831.2020.173915610.1080/21663831.2020.1739156 ↗
31. 10.1038/s41598-019-43362-910.1038/s41598-019-43362-9 ↗