Phase stability in additively manufactured N-doped CoCrMo alloys via in-situ synchrotron X-ray diffraction during tensile testing
Source abstract
Abstract
Nitrogen is a critical yet challenging alloying element to incorporate into metals and alloys due to its inherently low solubility and poor capture efficiency. In this research, we demonstrate that CoCrMo (CCM) alloys manufactured via laser powder bed fusion (LPBF) using N2 gas-atomized precursor powders achieved a remarkably high supersaturated nitrogen content (∼0.19 wt.%). Compared with alloys produced using Ar gas-atomized powders (LPBF CCM-Ar), the as-built LPBF CCM-N alloy exhibits a reduced density of stacking faults (SFs), attributed to the increased SF energy resulting from nitrogen incorporation. Meanwhile, both alloys demonstrate high yield strengths (YS >900 MPa) due to the presence of dense sub-micro Mo/Cr-decorated dislocation cells and SFs. Notably, nitrogen incorporation further enhances the YS (by >60 MPa) and elastic modulus in LPBF CCM-N alloys. In contrast, the LPBF CCM-Ar alloys demonstrated an elevated deformation-induced martensite proliferation rate during tensile deformation, contributing to greater work hardening capacity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shanghai Jiao Tong University
University of Science and Technology Beijing
Helmholtz-Zentrum Hereon
Nanjing University of Science and Technology
Funding
National Natural Science Foundation of China · Young Elite Scientists Sponsorship Program by CAST
References (48)
Show source-provided references
1. 10.1016/j.matchar.2010.10.01110.1016/j.matchar.2010.10.011 ↗
2. 10.1016/j.scriptamat.2016.06.01610.1016/j.scriptamat.2016.06.016 ↗
3. 10.21533/pen.v3i1.4310.21533/pen.v3i1.43 ↗
4. 10.4047/jap.2014.6.2.13810.4047/jap.2014.6.2.138 ↗
5. 10.1016/j.promfg.2017.07.15010.1016/j.promfg.2017.07.150 ↗
6. 10.1016/j.jmbbm.2013.12.01910.1016/j.jmbbm.2013.12.019 ↗
7. 10.1016/j.jallcom.2013.12.12610.1016/j.jallcom.2013.12.126 ↗
8. 10.1016/j.msea.2010.12.02410.1016/j.msea.2010.12.024 ↗
9. 10.1016/j.msea.2011.07.06210.1016/j.msea.2011.07.062 ↗
10. 10.1016/j.jmbbm.2013.10.00610.1016/j.jmbbm.2013.10.006 ↗
11. Lee SH, Nomura N, Chiba A. Significant improvement in mechanical properties of biomedical Co-Cr-Mo alloys with combination of N addition and Cr enrichment, mater. Trans. 2008;49(2):260–264.
12. 10.1007/s11661-012-1288-010.1007/s11661-012-1288-0 ↗
13. 10.1016/j.biomaterials.2005.10.01210.1016/j.biomaterials.2005.10.012 ↗
14. 10.1016/j.apsusc.2012.02.05710.1016/j.apsusc.2012.02.057 ↗
15. 10.1016/j.actamat.2014.08.03910.1016/j.actamat.2014.08.039 ↗
16. 10.1016/S0924-0136(03)00077-310.1016/S0924-0136(03)00077-3 ↗
17. 10.1016/j.jallcom.2014.05.17510.1016/j.jallcom.2014.05.175 ↗
18. 10.1016/j.actamat.2006.02.04810.1016/j.actamat.2006.02.048 ↗
19. 10.1016/j.actamat.2005.07.02810.1016/j.actamat.2005.07.028 ↗
20. 10.1016/j.jmbbm.2013.10.00610.1016/j.jmbbm.2013.10.006 ↗
21. 10.1016/j.apsusc.2015.04.05410.1016/j.apsusc.2015.04.054 ↗
22. 10.1016/j.actbio.2012.12.01310.1016/j.actbio.2012.12.013 ↗
23. 10.1016/j.matchemphys.2014.02.02310.1016/j.matchemphys.2014.02.023 ↗
24. 10.1103/PhysRevE.55.684510.1103/PhysRevE.55.6845 ↗
25. 10.1080/17452759.2023.221966510.1080/17452759.2023.2219665 ↗
26. 10.1016/j.apmate.2024.10021710.1016/j.apmate.2024.100217 ↗
27. 10.1080/21663831.2024.231620410.1080/21663831.2024.2316204 ↗
28. 10.1108/RPJ-01-2024-002710.1108/RPJ-01-2024-0027 ↗
29. 10.1016/j.matchemphys.2012.05.06910.1016/j.matchemphys.2012.05.069 ↗
30. 10.1016/j.actbio.2012.03.02410.1016/j.actbio.2012.03.024 ↗
31. 10.1016/j.scriptamat.2013.10.01510.1016/j.scriptamat.2013.10.015 ↗
32. 10.1016/j.matchar.2024.11409210.1016/j.matchar.2024.114092 ↗
33. 10.1016/j.actamat.2012.11.04110.1016/j.actamat.2012.11.041 ↗
34. 10.1016/j.msea.2014.05.07110.1016/j.msea.2014.05.071 ↗
35. 10.1016/j.msea.2023.14554910.1016/j.msea.2023.145549 ↗
36. 10.1038/s41598-017-10305-110.1038/s41598-017-10305-1 ↗
37. 10.1016/j.mattod.2017.11.00410.1016/j.mattod.2017.11.004 ↗
38. 10.1038/nmat502110.1038/nmat5021 ↗
39. 10.1016/j.matchar.2023.11346710.1016/j.matchar.2023.113467 ↗
40. 10.1016/j.addma.2020.10172510.1016/j.addma.2020.101725 ↗
41. 10.1080/21663831.2024.230526110.1080/21663831.2024.2305261 ↗
42. 10.1016/j.jmbbm.2024.10678810.1016/j.jmbbm.2024.106788 ↗
43. Niinomi M. Co–Cr-based alloys//structural biomaterials. Cambridge: Woodhead Publishing; 2021.
44. Porter DA, Easterling KE. Phase transformations in metals and alloys. Boca Raton: CRC press; 2009.
45. 10.1016/j.msea.2025.14787810.1016/j.msea.2025.147878 ↗
46. 10.1016/j.msea.2025.14839310.1016/j.msea.2025.148393 ↗
47. 10.1016/j.matchar.2024.11418110.1016/j.matchar.2024.114181 ↗
48. 10.1016/j.jmbbm.2024.10678810.1016/j.jmbbm.2024.106788 ↗