In-situ EBSD investigation of orientation induced mechanical anisotropy in selective laser melted Al-Mn-Sc alloy
Source abstract
Abstract
The mechanical anisotropy of selective laser melted (SLM) aluminum alloys resulting from heterogeneous grain structures is still not fully understood due to lacking study of grain orientation related mechanical response. Here, by introducing in-situ EBSD tensile method, the orientation induced anisotropy coefficient Ka related to the deformation-induced grain rotation was revealed by excluding effects of grain size and grain aspect ratio. Compared with traditional mechanical properties models by Taylor factor M, it was found that the orientation <001 > in as-built and <102 > in heat treatment contributed the most yield strength anisotropy, and introducing Ka predicts the mechanical anisotropy more accurately.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Light Alloy Research Institute, Central South University, Changsha, People’s Republic of China
School of Materials Science and Engineering, Central South University, Changsha, People’s Republic of China
Hunan Xiangtou Light Material Technology Co., LTD, Changsha, People’s Republic of China
Funding
National Natural Science Foundation of China
References (24)
Show source-provided references
1. 10.1016/j.actamat.2016.07.01910.1016/j.actamat.2016.07.019 ↗
2. Frazier WE. Metal additive manufacturing: a review. J Mater Eng Perform. 2014;23(12).
3. Kuernsteiner P, Wilms MB, Weisheit A, et al. Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition. Acta Mater. 2017;129(9).
4. Motaman SAH, Roters F, Haase C. Anisotropic polycrystal plasticity due to microstructural heterogeneity: a multi-scale experimental and numerical study on additively manufactured metallic materials. Acta Mater. 2020;185(30).
5. Charmi A, Falkenberg R, Avila L, et al. Mechanical anisotropy of additively manufactured stainless steel 316L: an experimental and numerical study. Mat Sci Eng a-Struct. 2021;799(15).
6. Liu Y, Ren J, Guan S, et al. Microstructure and mechanical behavior of additively manufactured CoCrFeMnNi high-entropyalloys: laser directed energy deposition versus powder bed fusion. Acta Mater. 2023;250(18).
7. Lan L, Wang W, Cui Z, et al. Anisotropy study of the microstructure and properties of AlCoCrFeNi2.1 eutectic high entropy alloy additively manufactured by selective laser melting. J Mater Sci Technol. 2022;129(12).
8. Fernandez-Zelaia P, Lee Y, Dryepondt S, et al. Creep anisotropy modeling and uncertainty quantification of an additively manufactured Ni-based superalloy. Int J Plasticity. 2022;151(27).
9. Ren Y, Tariq NUH, Liu H, et al. Study of microstructural and mechanical anisotropy of 7075 Al deposits fabricated by cold spray additive manufacturing. Mater Design. 2021;212(10).
10. 10.1016/j.actamat.2019.04.01410.1016/j.actamat.2019.04.014 ↗
11. 10.1016/j.actamat.2020.04.01510.1016/j.actamat.2020.04.015 ↗
12. Starink MJ, Wang SC. A model for the yield strength of overaged Al-Zn-Mg-Cu alloys. Acta Mater. 2003;51(20).
13. Kim K, Hwang J, Lee K. Effect of building direction on the mechanical anisotropy of biocompatible Co-Cr-Mo alloy manufactured by selective laser melting process. J Alloy Compd. 2020;834(9).
14. 10.1016/j.msea.2019.02.01310.1016/j.msea.2019.02.013 ↗
15. 10.1016/j.actamat.2013.04.03610.1016/j.actamat.2013.04.036 ↗
16. 10.1016/j.actamat.2019.04.03310.1016/j.actamat.2019.04.033 ↗
17. Aboulkhair NT, Simonelli M, Parry L, et al. 3D printing of Aluminium alloys: Additive Manufacturing of aluminium alloys using selective laser melting. Prog Mater Sci. 2019;106(100578).
18. Lyu Z, Sato YS, Tokita S, et al. Microstructural distribution and anisotropic tensile behavior in a 2Cr13 martensitic stainless steel thin wall fabricated by wire arc additive manufacturing. Mater Today Commun. 2021;29(102870).
19. 10.1007/s11837-021-04966-710.1007/s11837-021-04966-7 ↗
20. 10.1016/j.actamat.2020.08.07910.1016/j.actamat.2020.08.079 ↗
21. 10.1016/j.actamat.2020.03.06010.1016/j.actamat.2020.03.060 ↗
22. 10.1016/j.msea.2009.11.05610.1016/j.msea.2009.11.056 ↗
23. 10.1016/j.actamat.2018.04.05310.1016/j.actamat.2018.04.053 ↗
24. 10.1016/S1359-6454(03)00320-310.1016/S1359-6454(03)00320-3 ↗