Significantly extending the gradient layer and mechanical properties of Mg alloys by texture optimization
Source abstract
Abstract
Considerable efforts have been made to prepare a thicker gradient layer, while the reported thickness of the gradient layer for Mg alloys is often below 700 µm. In this study, an ultrasonic surface rolling process (USRP) was employed to fabricate gradient layers in AZ31 hot-rolled plates. By changing the initial texture of the c-axes of the grains from a direction largely parallel to the compression direction of the USRP into that perpendicular to the compression direction, the thickness of the gradient layer obtained by the USRP at a static force of 140 N increased from approximately 500 µm to 2000 µm. This in turn doubled the strengthening effect of the gradient layer under tension along the rolling direction of the plates, without compromising the ductility. Further investigations revealed that extending the gradient layer by tailoring its initial texture is closely related to the activation of profuse {101¯2} twinning.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangxi Academy of Sciences
Chongqing University
Nanjing Tech University
Huzhou University
East China University of Science and Technology
Funding
National Natural Science Foundation of China · Jiangxi Provincial Natural Science Foundation · Key R&D Projects of Jiangxi Province · Natural Science Foundation of Jiangsu Province · Jiangxi Province Ganpo Juncai Support Program - Training Program for Academic and Technical Leaders in Major Disciplines · Natural Science Foundation of Shanghai
References (34)
Show source-provided references
1. 10.1016/j.scriptamat.2021.11397510.1016/j.scriptamat.2021.113975 ↗
2. 10.1016/j.actamat.2022.11783110.1016/j.actamat.2022.117831 ↗
3. 10.1016/j.ijplas.2023.10372110.1016/j.ijplas.2023.103721 ↗
4. 10.1080/21663831.2018.147889810.1080/21663831.2018.1478898 ↗
5. 10.1016/j.actamat.2021.11703710.1016/j.actamat.2021.117037 ↗
6. 10.1080/21663831.2019.163553710.1080/21663831.2019.1635537 ↗
7. 10.1016/j.surfcoat.2021.12803110.1016/j.surfcoat.2021.128031 ↗
8. 10.1080/21663831.2017.133471510.1080/21663831.2017.1334715 ↗
9. 10.1016/j.actamat.2022.11825610.1016/j.actamat.2022.118256 ↗
10. 10.1016/j.jallcom.2021.16183510.1016/j.jallcom.2021.161835 ↗
11. 10.1016/j.jmrt.2023.03.00910.1016/j.jmrt.2023.03.009 ↗
12. 10.1016/j.ijplas.2024.10404110.1016/j.ijplas.2024.104041 ↗
13. 10.1016/j.jma.2021.11.01210.1016/j.jma.2021.11.012 ↗
14. 10.1016/j.actamat.2021.11701310.1016/j.actamat.2021.117013 ↗
15. 10.1016/j.actamat.2019.05.01610.1016/j.actamat.2019.05.016 ↗
16. 10.1080/21663831.2025.247088610.1080/21663831.2025.2470886 ↗
17. 10.1080/21663831.2022.213397610.1080/21663831.2022.2133976 ↗
18. 10.1080/21663831.2025.247196110.1080/21663831.2025.2471961 ↗
19. 10.1080/21663831.2021.200958510.1080/21663831.2021.2009585 ↗
20. 10.1016/j.actamat.2021.11722510.1016/j.actamat.2021.117225 ↗
21. 10.1080/21663831.2023.226541110.1080/21663831.2023.2265411 ↗
22. 10.1016/j.matchar.2023.11333310.1016/j.matchar.2023.113333 ↗
23. 10.1111/ffe.1273210.1111/ffe.12732 ↗
24. 10.1016/j.msea.2010.11.06910.1016/j.msea.2010.11.069 ↗
25. 10.1016/j.actamat.2021.11704910.1016/j.actamat.2021.117049 ↗
26. 10.1016/j.actamat.2016.10.01610.1016/j.actamat.2016.10.016 ↗
27. Afshin M, Khomeinishar A. Finite element simulation of deep rolling and evaluate the influence of parameters on residual stress. Recent Res Appl Mech. 2012; 254:121–127.
28. 10.1016/j.matdes.2015.06.02610.1016/j.matdes.2015.06.026 ↗
29. 10.1016/j.msea.2018.08.05310.1016/j.msea.2018.08.053 ↗
30. 10.1126/science.abe725210.1126/science.abe7252 ↗
31. 10.1038/s41467-021-24939-310.1038/s41467-021-24939-3 ↗
32. 10.1007/s11661-017-4216-510.1007/s11661-017-4216-5 ↗
33. 10.1016/j.msea.2017.04.00510.1016/j.msea.2017.04.005 ↗
34. Zhang Q, Li J, Jiang K, et al. Gradient structure induced simultaneous enhancement of strength and ductility in AZ31 Mg alloy with twin-twin interactions. J Magnes Alloys. 2021;8:2872–2882.