Effect of Rolling Temperature on Microstructure and Mechanical Properties of a Nb-Mo Microalloyed Medium Mn Steel
Source abstract
Abstract
Warm rolling of medium Mn steel is a promising technology to meet the needs of vehicle weight reduction and energy conservation while ensuring the safety for passengers. In this study, a novel Nb-Mo microalloyed 6.6Mn steel was subjected to a series of warm rolling tests at temperatures ranging from 630 to 690 ºC, based on the thermodynamic-based prediction of inter-critical annealing using a Thermo-Calc software. As a comparison, a conventional multi-stage thermo- mechanical process involving hot rolling, cold rolling and inter-critical annealing was carried out as well. The optimal rolling temperature parameters for warm rolling was explored through tensile tests and the detailed microstructural characterization. The experimental results show that the microstructure and mechanical characteristics strongly depended on the warm rolling temperature. A better combination of UTS and TE products (~32.0 GPa·%) was achieved in the 660ºC-warm-rolled specimen, which is much higher than 12.3 GPa·% for the hot formed 22MnB5 steel and is also comparable to 38.3 GPa·% for the annealed cold-rolled specimens.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Northeastern University, China
Northeastern University, China; Northeastern University, China
References (15)
Show source-provided references
1. Medium Mn transformation-induced plasticity steels: Recent progress and challenges10.1016/j.scriptamat.2016.07.013 ↗
2. Recent progress in medium-Mn steels made with new designing strategies, a review10.1016/j.jmst.2017.06.017 ↗
3. A review on hot stamping
4. Rana R · 2015
5. Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel10.1016/j.actamat.2018.01.009 ↗
6. A novel Mo and Nb microalloyed medium Mn TRIP steel with maximal ultimate strength and moderate ductility10.1007/s11661-014-2504-x ↗
7. Dependence of deformation behavior on grain size and strain rate in an ultrahigh strength-ductile Mn-based TRIP alloy10.1016/j.msea.2015.11.103 ↗
8. Pan HJ · 2017 · 134 · 352
9. Medium Mn transformation-induced plasticity steels: Recent progress and challenges10.1016/j.scriptamat.2016.07.013 ↗
10. Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability10.1016/j.actamat.2011.04.011 ↗
11. Dynamic recrystallization of austenite in Ni-30 Pct Fe model alloy: Microstructure and texture evolution10.1007/s11661-009-9799-z ↗
12. Current opinion in medium manganese steel10.1179/1743284714Y.0000000722 ↗
13. Influence of various material design parameters on deformation behaviors of TRIP steels10.1016/j.commatsci.2010.10.002 ↗
14. Influence of Al on the microstructural evolution and mechanical behavior of low-carbon, manganese transformation-induced-plasticity steel10.1007/s11661-009-0124-7 ↗
15. Luo HW · 2011 · 59 · 4002