Thermomechanical Simulation of Heat-Affected Zones in Nickel-Free High Nitrogen Stainless Steel: Microstructural Evolution and Mechanical Property Studies
Source abstract
Abstract
Three different Heat Affected Zones (HAZ) in hot rolled Nickel Free High Nitrogen Stainless Steels (NFHNSS) based on three different peak temperatures were physically simulated using Gleeble Simulator to investigate microstructural evolution and structure-property correlation. Optical microscopy revealed that the austenite grains are recrystallized in the simulated heat affected zone in the peak temperature range of 750 oC to 1050 oC. Extent of recrystallization of grains and nucleation of precipitates varied with peak temperatures. TEM characterization showed the presence of Cr2N precipitate having an average particle size in the range of 300 nm to 395 nm in the simulated HAZ were confirmed by Selected Area Electron Diffraction (SAED) analysis. Precipitation kinetics of Cr2N were simulated using Thermo-Calc were found to correlate well with experimental values. Mechanical properties of specimens taken from three different HAZ were evaluated for tensile strength and hardness. Variation in strength of the different specimens has been discussed using various strengthening models. Fractography analysis was also carried out to understand the effect of peak temperature on fracture behaviour. Transition in fracture patterns in NFHNSS from ductile to mixed mode was observed for different specimens.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
PSG College of Technology, India
Kongu Engineering College, India
References (33)
Show source-provided references
1. Microstructure and pitting corrosion of shielded metal arc welded high nitrogen stainless steel10.1016/j.dt.2015.04.002 ↗
2. Weldability of high nitrogen stainless steel10.2355/isijinternational.42.1334 ↗
3. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
4. Analysis of microstructure and properties of welded joint of high nitrogen steel by hybrid welding
5. Research on the properties of TIG welded joints of high nitrogen nickel-free austenitic stainless steel and welding wire10.1179/1432891714Z.000000000538 ↗
6. Design and evaluation of nitrogen-rich welding wires for high nitrogen stainless steel
7. Welding of nickel free high nitrogen stainless steel: microstructure and mechanical properties10.1016/j.dt.2016.06.003 ↗
8. Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12N austenitic stainless steel welded joints10.1016/j.matchar.2017.07.028 ↗
9. Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel10.1016/S0921-5093(02)00065-5 ↗
10. Effect of heat input on MA constituent and toughness of coarse grain heat-affected zone in an X100 pipeline steel10.1007/s11665-019-03921-7 ↗
11. Effect of simulated welding thermal cycles on microstructure and mechanical properties of coarse-grain heat-affected zone of high nitrogen austenitic stainless steel10.1016/j.matchar.2019.01.030 ↗
12. Nucleation and precipitation kinetics of M23C6 and M2N in an Fe-Mn-Cr-C-N austenitic matrix and their relationship with the sensitization phenomenon10.1016/j.actamat.2011.06.038 ↗
13. Kinetics of Cr2N precipitation and its effect on pitting corrosion of nickel-free high-nitrogen austenitic stainless steel10.1007/s11665-020-05098-w ↗
14. Applications of Thermo-Calc in research of high nitrogen austenitic stainless steels
15. Effect of nitrogen content on grain refinement and mechanical properties of a reversion-treated Ni-Free 18Cr-12Mn austenitic stainless steel10.1007/s11661-014-2595-4 ↗
16. A comparison of strengthening mechanisms of austenitic Fe-13Mn-1.3C steel in warm and cold high-pressure torsion10.3390/met10040493 ↗
17. Farooq M · 2013
18. Correlation of microstructure with HAZ welding cycles simulated in Ti-15-3 alloy using Gleeble® 3800 and SYSWELD®10.1520/MPC20140065 ↗
19. Gleeble simulation of the HAZ in Inconel 617 welding10.1016/j.jmatprotec.2015.06.001 ↗
20. Effect of peak temperature on microstructure and mechanical properties of thermally simulated welding heat-affected zones for 09MnNiDR steel10.1007/s11665-020-05154-5 ↗
21. 2013
22. Experimental and computational study of nitride precipitation in a CrMnN austenitic stainless steel10.1016/j.msea.2016.12.071 ↗
23. Nucleation and growth during recrystallization10.1590/S1516-14392005000300002 ↗
24. Recrystallization and grain growth in hot rolling10.1179/msc.1979.13.3-4.187 ↗
25. Misra S · 1986
26. Higginson RL · 2003 · 788
27. Effects of pre-precipitation of Cr2N on microstructures and properties of high nitrogen stainless steel10.1007/s11771-012-1127-x ↗
28. Gavriljuk VG · 1999
29. On the crystal structure of Cr2N precipitates in high-nitrogen austenitic stainless steel10.1107/S0108768104033919 ↗
30. Effect of welding heat input on microstructural evolution, precipitation behavior and resultant properties of the simulated CGHAZ in high-N V-alloyed steel10.1016/j.matchar.2020.110201 ↗
31. Effect of simulated welding thermal cycle on microstructure and mechanical properties of X90 pipeline steel10.1016/j.msea.2011.06.046 ↗
32. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
33. Processing, microstructural evolution and strength properties of in-situ magnesium matrix composites containing nano-sized polymer derived SiCNO particles10.1016/j.msea.2017.01.001 ↗