journal article·2022Open access

Microstructure and Mechanical Properties of Microalloyed Steels Containing Molybdenum

Jaqueline Polezi Mazini, André Itman Filho, Breno Mendes Rabelo Ávila, Rosana Vilarim da Silva, Pedro Gabriel Bonella de Oliveira

Materials Research· Volume 25

Abstract

Microalloyed steels have a maximum of 2% in alloying elements and are used in the automotive and petrochemical industries. The microstructure and mechanical properties of these steels depend on chemical composition, processing and addition of molybdenum, niobium, titanium and vanadium. To evaluate the molybdenum effect in microstructure and mechanical properties, two microalloyed steels, with similar levels of niobium, titanium and vanadium, were prepared and forged. The steels have 0.056 and 0.160 percent by weight of molybdenum. The bars were homogenized, quenched and tempered. The specimens were machined for tensile and impact tests, hardness and microstructural analyzes by confocal and scanning electron microscopy. The ThermoCalc software was used to evaluate the carbides characteristics. The results show that steel with 0.160% Mo presents greater amount of bainite and austenite retained. It’s possible that formation of carbides by the secondary hardening mechanism increase in mechanical strength and a reduction in toughness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Federal de Educação Ciência e Tecnologia do Espírito Santo, Brasil

Universidade de São Paulo, Brasil

References (38)

Show source-provided references
1. Gray JM · 2009
2. A review on importance of microalloying in steel
3. 2021
4. Speer JG · 2006
5. Selected developments in Nb-microalloyed forgings for induction hardening, and pearlitic wire rod10.4322/2176-1523.20202325 ↗
6. Strengthening of HSLA steels by cool deformation10.1016/j.msea.2010.03.036 ↗
7. The effect of cooling rate, and cool deformation through strain-induced transformation, on microstructural evolution and mechanical properties of microalloyed steels10.1007/s11661-011-0958-7 ↗
8. Mousavi ASH · 2018 · 145
9. Okaguchi S · 1988 · 330
10. Shang CJ · 2014 · 37
11. Huang BM · 2013 · 29
12. Li L · 2004 · 249
13. 2013
14. Phase transformation study in Nb-Mo microalloyed steels using dilatometry and EBSD quantification10.1007/s11661-013-1738-3 ↗
15. High-temperature properties and microstructure of Mo microalloyed ultra-high-strength steel10.1007/s12613-011-0454-5 ↗
16. Equilibrium model of precipitation in microalloyed steels10.1007/s11661-010-0428-7 ↗
17. Calculation models for determining the critical points of steel10.1007/BF00712859 ↗
18. Effect of niobium and phase transformation temperature on the microstructure and texture of a novel 0.40% C thermomechanically processed steel10.1016/j.matchar.2018.05.056 ↗
19. Coladas J · 1977 · 341
20. Controle do tamanho de grão austenítico de um aço para trabalho a quente através de adição de Nb
21. The effects of Nb and Mo addition on transformation and properties in low carbono bainitic steels10.1016/j.matdes.2015.06.133 ↗
22. The effect of microphases on elongation of nanostructured bainitic steels10.1007/s11015-017-0444-6 ↗
23. The bainite transformation in a silicon steel10.1007/BF02658309 ↗
24. Microstructural features controlling mechanical properties in nb-mo microalloyed steels. Part II: impact toughness10.1007/s11661-014-2451-6 ↗
25. Bhadeshia HKDH · 2001
26. Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels10.1016/j.msea.2006.12.097 ↗
27. Secondary hardening during tempering of Cr-W-Mo-V high alloy medium-upper carbon steel and its hardness forecast
28. Porter DA · 2009
29. Interphase precipitation hardening of a Ti-Mo microalloyed dual-phase steel produced by continuous cooling10.1016/j.msea.2020.140518 ↗
31. Precipitation of Nb in ferrite after austenite conditioning. Part II: strengthening contribution in High-Strength Low-Alloy (HSLA) steels10.1007/s11661-012-1270-x ↗
32. Effect of Nb-Mo additions on precipitation behaviour in V microalloyed TRIP-assisted steels10.1080/02670836.2016.1145852 ↗
33. Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic Steel10.3390/ma11081441 ↗
34. Influence of Mo content on microstructure and mechanical properties of high strength pipeline steel10.1016/j.matdes.2004.03.009 ↗
35. Effects of retained austenite volume fraction, morphology, and carbon content on strength and ductility of nanostructured TRIP-assisted steels10.1016/j.msea.2015.04.030 ↗
36. Effect of microstructure on the yield ratio and low temperature toughness of linepipe steels10.2355/isijinternational.42.1571 ↗
37. Maalekian M. · 2007
38. Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering10.1016/j.msea.2016.12.019 ↗