journal article·2024Open access

The Impacts of Co and Ni Additions to High Solute Content Fe-Contaminated Al alloys in Beneficing Microstructure and Tensile Properties

Marcella Gautê Cavalcante Xavier, José Eduardo Spinelli

Materials Research· Volume 27

Abstract

The accumulation of tramp impurities, particularly Fe, during recycling of Al alloys frequently leads to the production of coarse intermetallics during solidification, which affect final product mechanical properties. Because lowering the Fe concentration and/or using thermomechanical processing to subdivide the particles is expensive, it is preferred to modify the morphology, size, and distribution of the IMCs during solidification. Benefiting the properties of Al-contaminated alloys entails increased recyclability and a reduction in the usage of virgin primary Al and downcycled alloys. The Al-8%Si-0.8%Fe-2.5%Cu-1.0%Zn (in wt.%) alloy was modified with 0.7%Ni and 0.7%Co. Both dendritic growth and tensile properties were evaluated for the three alloys. The secondary dendrite arm spacing values (λ2) were found very refined for all alloys. The λ2 in the modified alloys was even more reduced. The Co addition of 0.7% reached higher values of tensile strength (220 MPa) as compared to the others without major losses in ductility. The addition of Co can enhance strength by up to 15%, considering more refined microstructures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de São Carlos, Brasil

References (29)

Show source-provided references
1. 2022
2. Bertram M. · 2001
3. 2022
4. In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification10.1016/j.actamat.2014.07.018 ↗
5. Influence of Cu on modifying the beta phase and enhancing the mechanical properties of recycled Al-Si-Fe cast alloys10.1038/s41598-017-05937-2 ↗
7. Effects of vibration frequency on microstructure, mechanical properties, and fracture behavior of A356 aluminum alloy obtained by expendable pattern shell casting10.1007/s00170-015-7586-0 ↗
8. Bulkley JW · 1997
9. Assessment of secondary aluminum reserves of nations10.1016/j.resconrec.2017.06.016 ↗
10. Mondolfo LF · 1976
11. Campbell J · 1991
12. Zolotorevsk VS · 2007 · 32710.1016/B978-008045370-5.50007-9 ↗
13. Reviews on the influences of alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composite
14. Combined effects of cobalt addition and ultrasonic vibration on microstructure and mechanical properties of hypereutectic Al-Si alloys with 0.7% Fe10.1016/j.msea.2012.06.026 ↗
15. Change in the microstructure of AlSi10MgMn alloy with higher iron content due to an increase in the amount of nickel
16. Influence of Ni in high Fe containing recyclable Al-Si cast alloys10.1016/j.matdes.2019.108017 ↗
17. In-situ X-ray radiography of twinned crystal growth of primary Al13Fe410.1016/j.scriptamat.2020.04.010 ↗
18. Transient unidirectional solidification, microstructure and intermetallics in Sn-Ni alloys
19. Evaluating microstructure, wear resistance and tensile properties of Al-Bi(-Cu, -Zn) alloys for lightweight sliding bearings10.3390/met11010153 ↗
20. Measurements of cell and primary dendrite arm spacings in directionally solidified aluminium alloys10.1016/0001-6160(81)90111-5 ↗
21. 2016
22. Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster10.1016/j.ijheatmasstransfer.2008.07.003 ↗
23. Correlation between unsteady-state solidification conditions, dendrite spacings, and mechanical properties of Al-Cu alloys10.1007/s11661-000-0096-0 ↗
24. The effects of solidification cooling and growth rates on microstructure and hardness of supersaturated Al-7%Si-x%Zn alloys10.1007/s11665-021-06341-8 ↗
25. Understanding the effect of Ni content on microstructures and tensile properties of AlSi10Mg alloy samples under a variety of solidification rates10.1016/j.jallcom.2022.166496 ↗
26. Effect of alloying elements on the solidification characteristics and microstructure of Al- Si- Cu- Mg- Fe 380 alloy10.1007/BF02647989 ↗
27. Influence of secondary dendrite arm spacing (SDAS) on the fatigue properties of different conventional automotive aluminum cast alloys10.3221/IGF-ESIS.48.13 ↗
28. Perspectives on cobalt supply through 2030 in the face of changing demand10.1021/acs.est.9b04975 ↗
29. U.S. Cobalt: a cycle of diverse and important uses10.1016/j.resconrec.2022.106441 ↗