journal article·2013-10-11Open access

Designing of CK45 carbon steel and AISI 304 stainless steel dissimilar welds

Hesam Pouraliakbar, Mohsen Hamedi, Amir Hossein Kokabi, Ali Nazari

Materials Research· Volume 17· Issue 1

Abstract

Gas tungsten arc welding of CK45 and AISI304 stainless steel was performed through preparation of different types of samples using ER308L and ERNi-1 wires. Welded samples were studied by different techniques including optical metallography, scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDS), X-ray diffraction, hardness measurements and impact test. It was observed that in the buttered specimen, the structure of the weld metal was completely austenitic while the microstructure of unbuttered sample was duplex ferritic-austenitic. M23C6-type carbides were observed within the weld metal of both as-weld specimen types. Effects of different post-weld heat treatments (PWHTs) were investigated. The experimented results concluded that simultaneous grain growth and carbides precipitation were competitive during PWHT. Also, there were not any indication related to sigma-phase in as-welded and PWHTed specimens due to their lower Cr/Ni ratios and insufficient preservation times.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Sharif University of Technology, Iran; WorldTech Scientific Research Center

Sharif University of Technology, Iran

WorldTech Scientific Research Center

References (38)

Show source-provided references
1. Davis JR · 1993
2. Kearns WH · 1982 · 514
3. Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints10.1016/j.matdes.2010.12.011 ↗
4. Investigation of the mechanical properties of friction-welded joints between AISI 304L and AISI 4340 steel as a function rotational speed10.1016/j.matlet.2005.03.034 ↗
5. Welded joints between dissimilar metals in high temperature service
6. Fusion welding of dissimilar metals for high-temperature strength
7. Welding stainless steel to carbon or ferritic steel
8. Evaluation of residual stresses in dissimilar weld joints10.1016/j.ijpvp.2005.03.006 ↗
9. Reddy GM. An assessment of hardness, impact strength and hot corrosion behavior of friction-welded dissimilar weldments between AISI 4140 and AISI 30410.1007/s00170-007-1266-7 ↗
10. Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel10.1016/j.matchar.2012.09.004 ↗
11. Mechanical and Structural Properties of Similar and Dissimilar Steel Joints10.1016/S1044-5803(99)00045-5 ↗
12. Diffusion across dissimilar metal joints
13. Carbon migration in 5Cr-0.5Mo/21Cr-12Ni dissimilar metal welds10.1007/s11661-998-0211-1 ↗
14. Lippold JC · 2005 · 141
15. Kou S · 2002 · 431
16. Microstructure/Property relationships in dissimilar welds between duplex stainless steels and carbon steels
17. Delta ferrite and martensite formation in stainless steels
18. The strength of austenite-ferrite dissimilar metal welds in chemical plant at temperatures below 400ºC10.1080/09507119109446763 ↗
19. Investigation of carbon migration during elevated temperature service for determining the propensity of a number of alloys to carbon migration
20. Marshall P · 1984
21. Davison RM · Metals Handbook · 1993 · 13 · 547
22. Vander Voort GF · Metals Handbook · 1993 · 9 · 279
23. The sigma phase transformation in austenitic stainless steels
24. Microstructure and corrosion behavior of shielded metal arc welded dissimilar joints comprising duplex stainless steel and low alloy steel10.1361/105994906X150902 ↗
25. Stress corrosion cracking and hydrogen embrittlement susceptibility studies on modified 9Cr-1Mo steel weldments in acidic and neutral media10.1179/bcj.1996.31.3.223 ↗
26. Effect of microstructure on corrosion rate of underwater steel welds10.5006/1.3585064 ↗
27. The influence of electrolyte reduction potential on weld corrosion10.1016/S0013-4686(02)00366-3 ↗
28. Study on welding such dissimilar materials as AISI 304 stainless steel and DHP copper in a sea-water environment. Influence of weld metals on corrosion
29. 1990
30. Solidification of austenitic stainless steel weldments, part 1 - a proposed mechanism
31. Effect of coarse initial grain size on microstructure and mechanical properties of weld metal and HAZ of a low carbon steel10.1016/S0921-5093(99)00137-9 ↗
32. Davis JR · 1994
33. Morphology of grain-boundary carbides and its influence on intergranular corrosion of 304 stainless steel
34. A short review on wrought austenitic stainless steels at high temperatures: processing, microstructure, properties and performance10.1590/S1516-14392007000400021 ↗
35. Bhadeshia HKDH · 1993 · 109
36. Easterling KE · 1992
37. Sigma formation and its effect on the impact properties of iron-nickel-chromium alloys
38. Precipitation in AISI 316L(N) during creep tests at 550 and 600 ºC up to 10 years10.1016/j.jnucmat.2006.12.027 ↗