journal article·2020Open access

Analysis of Spinel Based Inclusions During the Last Stage of The Steelmaking Process of SAE 52100

Julio Aníbal Morales Pereira, Vinicius Cardoso da Rocha, Pedro Cunha Alves, Wagner Viana Bielefeldt, Antônio Cezar Faria Vilela

Materials Research· Volume 23· Issue 1

Abstract

Al2O3 (alumina) and MgO·Al2O3 (spinel) inclusions cause valve obstruction (clogging) in continuous casting and can deteriorate the quality of the final product. In this context, industrial heats of the bearing steel SAE 52100 was examined. Samples were collected in the final steps of the steelmaking process, both after vacuum treatment and during continuous casting. A scanning electron microscope (SEM) equipped with a energy-dispersive spectrometer (EDS) and automated particle characterization analysis was used to characterize the inclusions present in the steel samples. Thermodynamic calculations were performed with the commercial software FactSageTM 7.2. Based on thermodynamic predictions, parameters such as solid fraction, liquid fraction, MgO saturation point of the slags, content of dissolved elements in steel (Al, Mg, Ca,...) and the construction of a phase stability diagram were determined. The results in this study showed a tendency for increase in MgO content in the inclusions with the decrease of %FeO and SiO2 contents in the slag, an increase of binary basicity (%CaO/%SiO2). It is verified that the MgO contents in the slag were close to the saturation, increasing the probability for the formation of inclusions rich in MgO and/or spinel. On the other hand, stability diagrams confirm the formation of spinel inclusions for each of the heats analyzed. During the final step of the steelmaking process, there is a tendency for re-oxidation, which is verified by an increase in the density of inclusions (or total oxygen TO values).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Materials Engineering and Processing · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Rio Grande do Sul, Brasil

References (59)

Show source-provided references
1. Non-metallic inclusions in steels - origin and control10.1016/j.jmrt.2018.04.003 ↗
2. Steels for bearings10.1016/j.pmatsci.2011.06.002 ↗
3. Zheng L · 2007 · 19
4. Monnot J · 1988 · 149
5. Nishikawa T · 2002 · 160
6. Tsubota K · 1998 · 20210.1520/STP12129S ↗
7. Uesugi T · 1988 · 278
8. Kawakami K · 2005 · 209
9. The ability of slags to absorb solid oxide inclusions10.2355/isijinternational.46.450 ↗
10. Capurro C · 2014 · 60
11. Effect of basicity on deoxidation capability of refining slag10.1016/S1006-706X(13)60051-5 ↗
12. Kim SJ · 2015 · 3261
13. Mechanism study on the formation of liquid calcium aluminate inclusion from MgO‐Al2O3 spinel10.1002/srin.200606463 ↗
14. Evolution mechanism of non-metallic inclusions in Al-Killed alloyed steel during secondary refining process10.2355/isijinternational.53.450 ↗
15. Effect of slag composition on the kinetics of formation of Al2O3–MgO inclusions in aluminum killed ferritic stainless steel10.2355/isijinternational.40.121 ↗
16. Control of MgO∙Al2O3 spinel inclusions in stainless steels10.2355/isijinternational.50.1333 ↗
17. Formation and modification of MgO·Al2O3-based inclusions in alloy steels10.1007/s11663-012-9663-1 ↗
18. Formation mechanism of complex oxide inclusions in 55SiCr spring steels
19. Evolution of Al2O3 inclusions by magnesium treatment in H13 hot work die steel10.1080/03019233.2016.1165498 ↗
20. Inclusion evolution in 50CrVA spring steel by optimization of refining slag10.1016/S1006-706X(17)30130-9 ↗
21. Stability diagram of Mg-Al-O system inclusions in molten steel10.1007/s11663-015-0361-7 ↗
22. Calcium and magnesium thermodynamics in steel and its impacts on secondary steelmaking: a computational thermodynamics approach10.1051/metal:2008030 ↗
23. Formation of MgO·Al2O3 inclusions in high strength alloyed structural steel refined by CaO–SiO2–Al2O3–MgO slag10.2355/isijinternational.48.885 ↗
24. Capurro C · 2013 · 332
25. Bartosiaki BG · 2014
26. Kaushik P · 2012
27. Inclusion evolution after calcium addition in low carbon al-killed steel with ultra low sulfur content10.2355/isijinternational.55.126 ↗
28. Reis BH · 2013
29. Analysis of secondary refining slag parameters with focus on inclusion cleanliness
30. Thermodynamics on control of inclusions composition in ultraclean steels10.2355/isijinternational.36.528 ↗
31. Malayeri KR · 2015 · 16
32. Laboratory study on evolution mechanisms of non-metallic inclusions in high strength alloyed steel refined by high basicity slag10.2355/isijinternational.50.95 ↗
33. Characteristics of inclusions in low carbon al-killed steel during ladle furnace refining and calcium treatment10.2355/isijinternational.53.1401 ↗
34. Chunyang L · 2018
35. Study on refining slags targeting high cleanliness and lower melting temperature inclusions in Al killed steel10.1179/1743281211Y.0000000043 ↗
36. Influence of slag composition on bearing steel cleanness10.1179/1743281212Y.0000000096 ↗
37. Mendez J · 2012
38. Effect of slag composition on inclusion control in LF-VD process for ultra-low oxygen alloyed structural steel10.1016/j.proeps.2011.09.015 ↗
39. Mu H · 2015 · 3272
40. Bao S · 2008
41. Introduction to formation of spinel inclusions in molten stainless steel under Al deoxidation with slags10.2355/tetsutohagane1955.84.12_837 ↗
42. Thermodynamic analysis on the formation mechanism of MgO·Al2O3 spinel type inclusions in casing steel10.1007/s12613-010-0106-1 ↗
43. Effect of silica in slag on inclusion compositions in 304 stainless steel deoxidized with aluminum10.2355/isijinternational.44.1350 ↗
44. Refractory–slag–metal–inclusion multiphase reactions modeling using computational thermodynamics: kinetic model for prediction of inclusion evolution in molten steel10.1007/s11663-016-0734-6 ↗
45. Effect of calcium treatment on non-metallic inclusions in ultra-low oxygen steel refined by high basicity high Al2O3 slag10.1016/S1006-706X(11)60083-6 ↗
46. Tan J · 2015 · 3296
47. Laboratorial analysis of inclusions formed by reoxidation in tundish steelmaking10.1002/srin.201800248 ↗
48. Evolution mechanism of non-metallic inclusions in Al-killed alloyed steel during secondary refining process10.2355/isijinternational.53.450 ↗
49. Mechanism study on the formation of liquid calcium aluminate inclusion from MgO.AI203 spinel10.1002/srin.200606463 ↗
50. Behavior of MgO·Al2O3 based inclusions in alloy steel during refining process10.1016/S1006-706X(10)60147-1 ↗
51. Evolution of different inclusions during ladle treatment and continuous casting of stainless steel10.2355/isijinternational.53.2099 ↗
52. Laboratory study on evolution mechanisms of non-metallic inclusions in high strength alloyed steel refined by high basicity slag10.2355/isijinternational.50.95 ↗
53. Calcium modification of spinel inclusions in aluminum-killed steel: reaction Steps10.1007/s11663-012-9660-4 ↗
54. Minimisation of calcium additions to low carbon steel grades10.1179/030192300677769 ↗
55. Deepoo Kumar P · 2016 · 145
56. Rate of MgO pickup in alumina inclusions in aluminum-killed steel10.1007/s11663-018-1436-z ↗
57. Chris Pistorius P · 2006 · 373
58. Computational thermodynamic study of inclusions formation in the continuous casting of SAE 8620 steel10.1002/srin.201000057 ↗
59. Influence of the chemical composition on steel casting performance