Effects of Chromium and Aluminum Additions on High-Entropy Alloys of the NbTiCrAl System: Development and Characterization
Source abstract
Abstract
This study investigates the design, synthesis, and characterization of novel high-entropy alloys (HEAs) in the NbTiCrAl system, focusing on the compositions NbTi, Nb7Ti7Cr2, Nb7Ti7Al2, Nb7Ti7Cr1Al1, and Nb3Ti3Cr1Al1. Microstructural analysis identified a single-phase BCC solid solution with dendritic structure, where compositional segregation is driven by melting point differences, with Ti, Cr, and Al migrating to interdendritic regions. Mechanical testing demonstrated that Cr and Al additions significantly improved hardness and strength, with Nb3Ti3Cr1Al1 exhibiting the highest microhardness (387.9 ± 6.1 HV0.5) and compressive yield strength (986.4 ± 70.0 MPa). Statistical analysis through a 22 full-factorial + central point design and ANOVA indicated that Cr predominantly influences the mechanical properties, with minimal interaction from Al. Multivariable linear regression models were developed to predict mechanical performance. These findings underscore the importance of Cr and Al balance for phase stability and mechanical properties, establishing the NbTiCrAl system as a promising candidate for advanced structural applications.
Source: crossref · Quality: baseline
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Alfenas, Brasil
Łukasiewicz Research Network, Poland
Universidade Federal de Alfenas, Brasil; DECHEMA Research Institute, Germany
Funding
National Science Centre
References (67)
Show source-provided references
1. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
2. Microstructural and compositional design of Ni-based single crystalline superalloys: a review10.1016/j.jallcom.2018.01.224 ↗
3. High temperature materials for aerospace applications: ni-based superalloys and γ-TiAl alloys10.1016/j.crhy.2018.10.002 ↗
4. Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: A review
5. Advanced materials for aircraft engine applications10.1126/science.255.5048.1082 ↗
6. A new approach of designing superalloys for low density10.1007/s11837-010-0011-0 ↗
7. Ultra-high temperature ceramics: materials for extreme environments10.1016/j.scriptamat.2016.10.018 ↗
8. Silicide-matrix materials for high-temperature applications10.1007/BF03220384 ↗
9. Mo-Si-B alloys: developing a revolutionary turbine-engine material10.1557/mrs2003.191 ↗
10. A review of very-high-temperature Nb-silicide-based composites10.1007/s11661-003-0269-8 ↗
11. High-temperature structural intermetallics10.1016/S1359-6454(99)00301-8 ↗
12. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
13. From high-entropy alloys to complex concentrated alloys10.1016/j.crhy.2018.09.004 ↗
14. High-entropy alloys10.1038/s41578-019-0121-4 ↗
15. Mapping the world of complex concentrated alloys10.1016/j.actamat.2017.06.027 ↗
16. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
17. Designing high entropy superalloys for elevated temperature application10.1016/j.scriptamat.2020.06.002 ↗
18. Development and exploration of refractory high entropy alloys: a review10.1557/jmr.2018.153 ↗
19. Refractory high entropy superalloys (RSAs)10.1016/j.scriptamat.2020.06.048 ↗
20. Light-weight refractory high-entropy alloys: a comprehensive review10.1016/j.jmst.2022.11.054 ↗
21. High-entropy ultra-high-temperature borides and carbides: a new class of materials for extreme environments10.1146/annurev-matsci-080819-121217 ↗
22. A high-entropy silicide: (Mo0.2Nb0.2Ta0.2Ti0.2W0.2) Si210.1016/j.jmat.2019.03.002 ↗
23. Complete elimination of pest oxidation by high entropy refractory metallic silicide (Mo0.2W0.2Cr0.2Ta0.2Nb0.2) Si210.1016/j.scriptamat.2020.07.059 ↗
24. Boron enhanced complex concentrated silicides – new pathway for designing and optimizing ultra-high temperature intermetallic composite materials10.1016/j.jmrt.2023.11.056 ↗
25. Boron enhanced complex concentrated silicides: a bridge between lightweight, oxidation-resistant refractory metal silicides and refractory complex concentrated alloys10.1016/j.nxmate.2023.100052 ↗
26. Synthesis of complex concentrated silicide coatings via reactive melt-infiltration: exploring interfacial phenomena between Si-B melt and MoNbTaW high-entropy alloy
27. A review on high entropy alloys coatings: fabrication processes and property assessment
28. Comprehensive review on high entropy alloy-based coating10.1016/j.surfcoat.2023.130327 ↗
29. Refractory high-entropy alloy coatings for high-temperature aerospace and energy applications10.1007/s11666-022-01324-0 ↗
30. Effect of Al and Nb on microstructure and mechanical properties of novel Al-Mo-Nb-Ti-V-Zr lightweight refractory high-entropy alloys10.1016/j.jallcom.2024.176655 ↗
31. TiNbCr multi-principal element alloy oxidation behavior in air at 800-1000 °C10.1007/s11085-024-10246-x ↗
32. High-temperature oxidation behavior of TaTiCr, Ta4Ti3Cr, Ta2TiCr, and Ta4TiCr3 concentrated refractory alloys10.1016/j.jallcom.2023.169000 ↗
33. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
34. Design of light-weight high-entropy alloys10.3390/e18090333 ↗
35. Low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system: microstructure and phase analysis10.1016/j.actamat.2012.11.032 ↗
36. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system10.1016/j.msea.2012.12.018 ↗
37. Microstructure and properties of aluminum-containing refractory high-entropy alloys10.1007/s11837-014-1066-0 ↗
38. Data-driven design of novel lightweight refractory high-entropy alloys with superb hardness and corrosion resistance10.1038/s41524-024-01457-6 ↗
39. Effect of Al on microstructure and mechanical properties of lightweight AlxNb0.5TiV2Zr0.5 refractory high entropy alloys10.1016/j.msea.2023.144628 ↗
40. Effect of Cr addition on the microstructure and mechanical properties of MoNbVTa0.5Crx refractory high-entropy alloys
41. Microstructural evolution, mechanical behavior, and deformation mechanisms of a lightweight Ti–Nb–Cr–V refractory high-entropy alloy at room and elevated temperatures10.1016/j.msea.2024.146883 ↗
42. Lightweight Ti-Zr-Nb-Al-V refractory high-entropy alloys with superior strength-ductility synergy and corrosion resistance10.1016/j.ijrmhm.2023.106331 ↗
43. Microstructure and properties of Al0.5NbTi3VxZr2 refractory high entropy alloys combined with high strength and ductility10.1016/j.jmrt.2023.03.103 ↗
44. Design of lightweight Ti3Zr1.5NbVx refractory high-entropy alloys with superior mechanical properties10.1016/j.jmrt.2023.09.283 ↗
45. Achieving excellent strength-ductility balance in the lightweight refractory high-entropy alloy by incorporating aluminum
46. Activating multiple slip systems in the laves phase improves the high-temperature strength and elastic coordination of (TiZr)65-XNb15Mo20CrX alloy10.1016/j.msea.2024.146369 ↗
47. Failure analysis of TiNbCr multi-principal element alloy: temperature-dependent oxidation and internal degradation in oxygen atmospheres10.1016/j.engfailanal.2025.109573 ↗
48. HEAPS: a user-friendly tool for the design and exploration of high-entropy alloys based on semi-empirical parameters10.1016/j.cpc.2022.108398 ↗
49. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
50. Prediction of high-entropy stabilized solid-solution in multi-component alloy10.1016/j.matchemphys.2011.11.021 ↗
51. More than entropy in high-entropy alloys: forming solid solutions or amorphous phase10.1016/j.intermet.2013.05.002 ↗
52. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
53. Microstructural evolution, mechanical behavior, and deformation mechanisms of a lightweight Ti–Nb–Cr–V refractory high-entropy alloy at room and elevated temperatures10.1016/j.msea.2024.146883 ↗
54. Design crystallographic ordering in NbTa0.5TiAlx refractory high entropy alloys with strength-plasticity synergy10.1016/j.jmrt.2023.11.254 ↗
55. Microstructure characteristics and mechanical properties of Hf0.5Mo0.5NbTiZr refractory high entropy alloy with Cr addition
56. Effect of Cr on microstructure and properties of WVTaTiCrx refractory high-entropy alloy laser cladding10.3390/ma16083060 ↗
57. Physical metallurgy of high-entropy alloys10.1007/s11837-015-1583-5 ↗
58. Contribution of lattice distortion to solid solution strengthening in a series of refractory high entropy alloys10.1007/s11661-017-4386-1 ↗
59. Lattice distortion in a strong and ductile refractory high-entropy alloy10.1016/j.actamat.2018.08.053 ↗
60. Lattice distortion as an estimator of solid solution strengthening in high-entropy alloys
61. Lattice‐distortion‐enhanced yield strength in a refractory high‐entropy alloy
62. Phase equilibria, mechanical properties and design of quaternary refractory high entropy alloys10.1016/j.matdes.2018.06.003 ↗
63. Effects of Cr content on microstructure and mechanical properties of WMoNbTiCr high-entropy alloys10.1007/s11665-020-04744-7 ↗
64. Effect of Al addition on mechanical properties and microstructure of refractory AlxHfNbTaTiZr alloys10.1016/j.jallcom.2014.11.064 ↗
65. Effects of Al addition on the microstructures and properties of MoNbTaTiV refractory high entropy alloy
66. Box GEP · 2005
67. Montgomery DC · 2013