Surface Integrity Analisys in the Hard Turning of Cemented Steel AISI 4317
Source abstract
Abstract
This work was based on the surface integrity analysis of hardened steel, AISI 4317 case carburized, quenched and tempered with 58 HRC, obtained by a turning operation executed with CBN (cubic boron nitride) tool, varying three basic cutting parameters (cutting speed, feed rate and cutting depth). The surface integrity characterization was conducted analyzing the behavior of the surface roughness Ra, residual stresses and with layer presence after turning. Also, the cutting forces were measured. The experimental planning used was a central composite design. The results and data were statistically treated by the Statistica software, enabling the generation of a mathematical model, relating the dependent variables with the independent variables. The roughness values Ra obtained after the experiments ranged from 0.31 to 2.8 µm, providing an indication that is possible to replace grinding process by hard turning using CBN tools that could reduce machining time and costs. The hard turning process generated compressive residual stresses profiles and white layer formation, from 1.1 to 5.1 µm, on the surface of the samples. The penetration force showed the highest values for the turning forces measurements. The lowest values for the cutting parameters represented the optimized surface integrity of the AISI 4317 steel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centro Universitário da Fundação Educacional Inaciana, Brasil
References (20)
Show source-provided references
1. Effect of Hardness on the Surface Integrity of AISI 4340 Steel10.1115/1.3187060 ↗
2. Cutting of Hardened Steel10.1016/S0007-8506(07)63455-6 ↗
3. Griffiths B · 2001
4. Dynamic Material Behavior Modeling Using Internal Variable Plasticity and its Application in Hard Turning Machining Simulations10.1115/1.2193549 ↗
5. Effect of surface integrity of hard turned AISI 52100 steel on fatigue performance10.1016/j.msea.2007.01.011 ↗
6. Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 30410.1016/j.jclepro.2016.08.030 ↗
7. Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network10.1016/j.measurement.2016.06.048 ↗
8. Analysis of Surface Roughness in Hard Turning Using Wiper Insert Geometry10.1016/j.procir.2015.12.087 ↗
9. Experimental Investigation and Surface roughness Analysis on Hard turning of AISI D2 Steel using Coated Carbide Insert10.1016/j.proeng.2014.12.226 ↗
10. Investigation on the effect of cooling of the tool using heat pipe during hard turning with minimal fluid application10.1016/j.jestch.2016.01.012 ↗
11. Performance of coated and uncoated mixed ceramic tools in hard turning process10.1016/j.measurement.2015.11.042 ↗
12. Surface Roughness Prediction using Artificial Neural Network in Hard Turning of AISI H13 Steel with Minimal Cutting Fluid Application10.1016/j.proeng.2014.12.243 ↗
13. Effect of Machining Parameters on Tool Wear in Hard Turning of AISI D3 Steel10.1016/j.proeng.2014.12.257 ↗
14. RSM based Study of Cutting Temperature During Hard Turning with Multilayer Coated Carbide Insert10.1016/j.mspro.2014.07.197 ↗
15. The surface integrity of turned and ground hardened bearing steel10.1016/0043-1648(96)06927-X ↗
16. Surface finish generated in hard turning of quenched alloy steel parts using conventional and wiper ceramics inserts10.1016/j.ijmachtools.2006.01.009 ↗
17. Surface integrity in finish hard turning of case-hardened steels10.1016/S0890-6955(02)00141-4 ↗
18. The monitoring of flank wear on the CBN tool in the hard turning process10.1007/s00170-003-1569-2 ↗
19. White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling10.1016/j.ijmachtools.2005.04.009 ↗
20. Hardness-based flow stress for numerical simulation of hard machining AISI H13 tool steel10.1016/j.jmatprotec.2007.08.018 ↗