Analysis of the Influence Of Friction Stir Welding on the Microstructure and Mechanical Properties of Alloy UNS-C27200 (CU-ZN)
Source abstract
Abstract
The copper alloy UNS-C27200 is a binary brass, composed of 38wt%Zn, beeing one of the most used in the industry. The union of Cu-Zn alloys by conventional welding by fusion in thin plates presents several challenges. The Friction Stir Welding (FSW) process performs the union of two, or more materials, through a rotating tool that travels throughout the welding region. One the great advantages of FSW is working below the melting point of the material, which reduces the change in the microstructure and properties of the material, when compared to conventional welding processes. Due to the lack of research on FSW process in lap brass joints with thin thicknesses, the present work aims to expand these studies in order to contribute to future research. Eight conditions were evaluated, varying rotation and welding speed. In the best results by visual inspection, analyzes of microstructure, temperature, microhardness and mechanical strength were performed. The better welding results were obtained with ω=1050 rpm and ν=20 mm/min. There was reduction of approximately 50% between Stir Zone and Base metal. The mechanical strength was affected by the pin hole resulting from the process. The microstructure revealed a homogeneous mixture in the stir zone and no defects were detected.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Federal de Educação, Ciência e Tecnologia de São Paulo, Brasil
Instituto Federal de Educação, Ciência e Tecnologia de São Paulo, Brasil; Instituto Federal de Educação, Ciência e Tecnologia de São Paulo, Brasil
Universidade Presbiteriana Mackenzie, Brasil
Termomecanica São Paulo S/A, Brasil
References (28)
Show source-provided references
1. Callister WD · 2016
2. The effect of weld parameters on friction stir welding of brass plates10.1002/mawe.200800314 ↗
3. Effect of tool pin profile on friction stir butt welding of high-zinc brass (CuZn40)10.1007/s00170-013-5480-1 ↗
4. Friction stir welded structural materials: beyond Al-alloys10.1179/095066010X12777205875750 ↗
5. Evaluation of the microstructure and mechanical properties of friction stir-welded copper/brass dissimilar joints10.1088/2053-1591/aacf20 ↗
6. Microstructure, texture, and mechanical properties of friction stir welded commercial brass alloy10.1016/j.matchar.2016.07.009 ↗
7. The joint properties of brass plates by friction stir welding10.1016/j.matdes.2005.05.006 ↗
8. 2020
9. Effect of friction stir welding parameters with newly developed tool for lap joint of dissimilar polymers10.1016/j.proeng.2015.08.059 ↗
10. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
11. Microstructural investigation of friction stir welded pure titanium10.1016/j.matlet.2005.05.064 ↗
12. União de termoplásticos pelo processo friction stir welding: influência da ferramenta e parâmetros do processo
13. Friction stir welding of AZ31 magnesium alloys - a numerical and experimental study10.1590/1679-78253162 ↗
14. The effect of rotational speed on Friction Stir Welding (FSW) Quality of dissimilar aluminum alloy series AA 1100 and AA 5052
15. Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints10.1016/j.jallcom.2007.06.009 ↗
16. Effect of heat input on the mechanical behaviour of Al-Cu FSW lap joints10.1590/1980-5373-mr-2017-0983 ↗
17. The microstructure and mechanical properties of single-pass and double-pass lap joint of Al 5754H-11 and Mg AZ31-O alloys by friction stir welding10.1016/j.jmrt.2023.02.222 ↗
18. Microstructures and mechanical properties of friction stir welds of 60% Cu-40% Zn copper alloy10.1016/j.msea.2003.11.030 ↗
19. Design of the friction stir welding tool using the continuum based FEM model10.1016/j.msea.2005.09.041 ↗
20. Feasibility of friction stir welding steel10.1179/136217199101538012 ↗
21. Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG10.1016/S0142-1123(03)00059-8 ↗
22. Effect of friction stir welding (FSW) on mechanical properties and microstructure of naval brass C46400
23. Microstructural and mechanical properties of friction stir welded Cu-30Zn brass alloy at various feed speeds: influence of stir bands10.1016/j.matdes.2011.01.015 ↗
24. A review of the friction stir welding of dissimilar materials between aluminum alloys and copper10.3390/met12040675 ↗
25. 2017
26. iSTIR: analytical thermal model for friction stir welding10.1016/j.jmatprotec.2004.12.016 ↗
27. The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process10.1016/j.matdes.2003.11.005 ↗
28. 2016