journal article·2020Open access

An Experimental Investigation of Continuous Casting Process: Effect of Pouring Temperatures on the Macrosegregation and Macrostructure in Steel Slab

Fernando Paulucio Quinelato, Wysllan Jefferson Lima Garção, Késsia Gomes Paradela, Roberto Carlos Sales, Luis Antônio de Souza Baptista, Alexandre Furtado Ferreira

Materials Research· Volume 23· Issue 4

Abstract

The solidification control is of extreme importance, because it strongly affects the final casting quality sanity. The structure obtained is generally not homogeneous and gives rise to great variations in composition, with position at small and large scales, which is known as segregation. An understanding of the way segregation occurs in continuous casting is of great importance for steels and in designing post-casting processes. As-cast structures are responsible the reduction in both scale and extension of segregation, because mass transport is dependent on the time required to diffuse a solute over a characteristic distance, e.g., the dendrite spacing that the characterizes the solidification structure. In this work, the effect of pouring temperature in steel slabs on the continuous casting processes are systematically investigated. Relationships between pouring temperature (P T ) and center macrosegregation was qualitatively examined. Photomicrographs of specimen taken from transverse sections of steel slabs, shows that macrosegregation is strongly affected by pouring temperature (P T ). For solute of carbon, phosphorus and sulfur, has been shown that the pouring temperature (P T ) has a significant role on the resulting macrosegregation profiles, while that the elements as such silicon, manganese and aluminum, the said thermal parameter seems not able to affect its macrosegregation profiles. This is due to the fact that the solutes with lower partition coefficients favors segregation during the continuous casting process. It is shown for considered steels, the pouring temperature (P T ) influences the position of the columnar to equiaxed transition (CET). Experimental results show that the end of the columnar region is abbreviated when lower pouring temperatures is used in continuous casting process. One can observe that as the pouring temperature (P T ) increase in continuous casting process, the secondary dendritic arm spacing ( 2 ) increase, i.e., the dendritic morphology became coarsen.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal Fluminense, Brasil

Universidade Federal Fluminense, Brasil; Instituto Federal do Rio de Janeiro, Brasil

References (30)

Show source-provided references
1. Mechanism of formation of the v-shaped segregation in the large section continuous cast bloom10.2355/isijinternational1966.24.917 ↗
2. Our understanding of macrosegregation: past and present10.2355/isijinternational.40.833 ↗
3. Prediction of cracks in continuously cast steel beam blank through fully coupled analysis of fluid flow, heat transfer, and deformation behavior of a solidifying shell10.1007/s11661-000-0067-5 ↗
4. Investigation of the grain boundary elemental composition of the low‐alloy steel10.1002/pssa.2211530108 ↗
5. Influence of cooling conditions on a slab’s chill zone formation during continuous casting of steel10.1515/amm-2017-0134 ↗
6. Reducing axial segregation in steel with turbulent feed of the metal into the mold of a continuous caster10.1007/BF02466074 ↗
7. Effect of different grain structures on centerline macrosegregation during direct-chill casting10.1016/j.actamat.2007.11.021 ↗
8. High speed continuous casting of steel billets Part 2: mould heat transfer and mould design10.1179/030192302225001947 ↗
9. The effects of casting speed on steel continuous casting process10.1007/s00231-011-0822-8 ↗
10. Experimental study of continuous electromagnetic casting of aluminum alloys10.1007/BF02679730 ↗
11. Continuous casting of copper tube billets under rotating electromagnetic field
12. Simulation of microstructure of as-cast steels in continuous casting10.2355/isijinternational.46.914 ↗
13. Austenite grain size in the continuous casting process: metallographic methods and evaluation10.1016/j.matchar.2007.06.003 ↗
14. The use of a heuristic search technique for the optimization of quality of steel billets produced by continuous casting10.1016/S0952-1976(00)00075-0 ↗
15. Thermo-mechanical simulation and parameters optimization for beam blank continuous casting10.1016/j.msea.2007.11.116 ↗
16. Application of hot strength and ductility test to optimization of secondary cooling system in billet continuous casting process10.1016/S1006-706X(08)60137-5 ↗
17. Internal defects of continuous casting slabs caused by asymmetric unbalanced steel flow in mold10.2355/isijinternational.43.1548 ↗
18. Thoughts about the initial solidification process during continuous casting of steel10.1034/j.1600-0692.2002.00519.x ↗
19. Solidification of AZ31 magnesium alloy plate in a horizontal continuous casting process10.1016/j.msea.2005.08.183 ↗
20. Micro-segregation behavior of solute elements in the mushy zone of continuous casting wide-thick slab10.1002/srin.201200102 ↗
21. Microstructure and solidification thermal parameters in thin strip continuous casting of a stainless steel10.1016/j.jmatprotec.2004.02.040 ↗
22. Pikkarainen T · 2016
23. 2020
24. Voort V · 1984 · 336
25. Garcia A · 2007 · 232
26. Investigations of columnar-equiaxed transition and equiaxed growth of aluminum-based alloys by X-ray radiography10.1016/j.msea.2005.08.197 ↗
27. A comparison of columnar-to-equiaxed transition prediction methods using simulation of the growing columnar front10.1007/s11661-008-9708-x ↗
28. Effect of pouring temperature on microstructure and microsegregation of as-cast aluminum alloy10.1007/s00170-019-03979-6 ↗
29. Effect of solidification processing parameters and silicon content on the dendritic spacing and hardness in hypoeutectic Al-Si alloys10.1590/1980-5373-mr-2018-0333 ↗
30. Simple model of microsegregation during solidification of steels10.1007/s11661-001-0152-4 ↗