journal article·2016-04-26Open access

Mechanical Characterization of Synthetic Macrofibres

Alan Renato Estrada Cáceres, Isaac Galobardes, Antonio Domingues de Figueiredo

Materials Research· Volume 19· Issue 3

Abstract

The present study proposes a methodology to characterize the mechanical properties of synthetic macrofibres, which are used as a reinforcement of new composites applied in civil construction industry. Some standards suggest that this characterization should be performed on original filaments and others propose using the current methodology used to characterise metallic fibres. These recommendations turn difficult the quality control procedure, so it was developed a methodology to characterize the mechanical properties of the macrofibres as they are supplied in the construction site, using the tensile test. In that sense, two types of macrofibres were evaluated obtaining their tensile strength and elastic modulus. Additionally, the macrofibres were mixed with aggregates in order to study how the abrasion affects their mechanical properties. Summing up, the proposed methodology is feasible, especially to estimate the tensile strength allowing its application in ordinary laboratories. Regarding the elastic modulus results, they may be underestimated using this method. Finally, it was observed that the abrasion between the macrofibre and the aggregates during the mixing process compromises the mechanical properties decreasing both the tensile strength and the elastic modulus.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of São Paulo, Brazil

References (23)

Show source-provided references
1. Figueiredo AD · 2011
2. Tiguman MP · 2004
3. Van Vlack LH · 1970
4. Callister WD · 2002
5. 2010
6. 2007
7. A technique for the measurement of reinforcement fibre tensile strength at sub-millimetre gauge lengths10.1016/S1359-835X(00)00122-6 ↗
8. The toughening effect of microscopic filament misalignment on macroscopic ballistic fabric response10.1023/A:1023390505987 ↗
9. Strain rate and gage length effects on tensile behavior of Kevlar 49 single yarn10.1016/j.compositesa.2012.06.007 ↗
10. Salvador RP · 2012
11. 2006
12. 2001
13. 2008
14. Workability analysis of steel fiber reinforced concrete using slump and VeBe test10.1590/1516-1439.022915 ↗
15. JSCE-SF1: Method of making steel fiber reinforced concrete in the laboratory
16. Cáceres AR · 2015
17. Geometric characterization of polymeric macrofibres10.1590/S1983-41952015000500006 ↗
18. Busabb W · 2002
19. Bentur A · 2007
20. Distribution and opening of fibrillated polypropylene fibers in concrete10.1016/0958-9465(91)90005-3 ↗
21. Innovative synthetic fibers
22. Canevarolo SV · 2006
23. Bonding in polypropylene fibre reinforced concretes10.1016/0262-5075(89)90087-0 ↗