Comparison between Neutron Diffraction measurements and numerical simulation of residual stresses of a Wire-Drawing process
Source abstract
Abstract
In this work, a drawing processed was simulated to calculate forces and the resulting residual stresses in the material. The calculated residual stresses were compared with experimentally measured residual stresses by the Neutron Diffraction Method. The modeled process was the Wire Drawing. The necessary parameters to model the process were taken from an industrial currently used process. Rods of an AISI 1045 steel with nominal diameters of 21.46 mm were reduced to 20.25 mm by drawing with an drawing angle of 15°. Compression tests were used to determinate flow curves of the real material an used in the simulation models. The possibility to estimate drawing forces by numerical simulation was evaluated by comparing simulated results with values from empirical equations given by the literature. The results have shown a sufficient accuracy for the calculation of forces, but the comparison of residual stresses has shown differences to the experimentally determined ones that can be minimized by the consideration of high strain rates in the compression tests, anisotropy of the material and kinematic hardening.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal do Rio Grande do Sul, Brasil
Universität Bremen
References (19)
Show source-provided references
1. Lange K · 2006 · 13
2. Dieter GE · 1981 · 653
3. On the complete solution of the deep-drawing problem10.1016/0020-7403(68)90065-9 ↗
4. State-of-the-art of Simulation of Sheet Metal Forming10.1016/S0924-0136(00)00413-1 ↗
5. Nunes RM
6. Changes in the axial residual stresses in AISI 1045 steel bars resulting from a combined drawing process chain10.1177/0954405411422299 ↗
7. Analysis by design of experiments of distortion potentials in drawn and induction hardened wire10.1590/S1516-14392012005000020 ↗
8. The new and upgraded neutron instruments for material science at HMI: current activities in cooperation with industry10.4028/www.scientific.net/MSF.524-525.223 ↗
9. Hauk V · 1997 · 530
10. A Method of Large Finite Elements10.1016/0045-7825(77)90043-3 ↗
11. Prediction of Chevron Crack Initiation in Inclusion Copper Shaped-Wire Drawing10.1016/j.engfailanal.2007.01.003 ↗
12. Simulação computacional de um processo de trefilação para produção de barras redondas de aço AISI 104510.1590/S0370-44672011000500018 ↗
13. Soares CAT
14. Gerbase Filho J
15. Schaeffer L · 2004
16. Residual Stresses in Cold-drawn Pearlitic Rods10.1016/j.scriptamat.2005.03.003 ↗
17. Residual Stresses in Cold-drawn Ferritic Rods10.1016/j.scriptamat.2004.10.010 ↗
18. Residual Stresses Profiling in the Ferrite and Cementite Phases of Cold-drawn Steel Rods by Synchrotron X-Ray and Neutron Diffraction10.1016/j.actamat.2004.07.036 ↗
19. Ottosen NS · 1979