journal article·2020Open access

Graphitization of Lignin-Phenol-Formaldehyde Resins

Segun Isaac Talabi, Ana Paula da Luz, Victor Carlos Pandolfelli, Vitor Hugo Lima, Vagner Roberto Botaro, Alessandra de Almeida Lucas

Materials Research· Volume 23· Issue 2

Abstract

Environmental friendliness and cost demand the development of lignin-modified phenolic (LPF) resins for application as a binder for carbon-containing refractories (CCRs) production. Moreover, the in-situ graphitization of such resins can produce crystalline carbon, which is an essential component of CCRs. Consequently, this study investigated LPF resins graphitization using ferrocene, boron oxide and boric acid. The modified resins were synthesized using thermally treated kraft lignin based on 1.5 formaldehyde to phenol molar ratio and with up to 30 wt.% lignin as phenol replacement. The resins chemical composition and the structural organization and oxidation resistance of carbons derived from the plain resins and those containing the graphitizing additives were determined. The results showed that ferrocene and the boron compounds could induce graphitic carbon generation when carbonizing LPF resins at 1500 °C for 5 hours. The best graphitization level (73%) was achieved when 10 wt.% boric acid was added to the resin produced with 20 wt.% lignin. Regarding the formulations containing ferrocene, the highest amount of graphitic carbon (48%) was generated when 5 wt.% of this additive was added to the resin synthesized with 10 wt.% lignin. The carbons derived from the formulations containing boron oxide presented the best oxidation resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Lignin and Wood Chemistry · Polymer composites and self-healing · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de São Carlos, Brasil; University of Ilorin, Nigeria

Universidade Federal de São Carlos, Brasil

References (62)

Show source-provided references
1. Modification of ammonium lignosulfonate by phenolation for use in phenolic resins10.1016/j.biortech.2004.09.009 ↗
2. Method to improve lignin’s reactivity as a phenol substitute and a replacement for other phenolic compounds: a brief review10.15376/biores.6.3.3515-3525 ↗
3. Gardziella A · 2000
4. Gellerstedt G · 2008 · 201
5. Lignin-modified phenolic resin: synthesis optimization, adhesive strength, and thermal stability10.1163/156856100743167 ↗
6. Activation of magnesium lignosulfonate and kraft lignin: influence on the properties of phenolic resin-based composites for potential applications in abrasive materials10.3390/ijms18061224 ↗
7. Xu C · 2017 · 91
8. Isoconversional kinetic analysis of novolac-type lignophenolic resins cure10.1016/j.tca.2008.03.005 ↗
9. Surface characteristics of phenol–formaldehyde–lignin resin determined by contact angle measurement and inverse gas chromatography10.1016/j.indcrop.2005.04.004 ↗
10. An approach to improve the application of acid-insoluble lignin from rice hull in phenol–formaldehyde resin10.1016/j.colsurfa.2011.01.006 ↗
11. Kraft lignin utilization in adhesives10.1007/BF00355851 ↗
12. Some of the properties of oriented strandboard manufactured using kraft lignin phenolic resin10.1016/j.jmatprotec.2007.10.039 ↗
13. Kraft lignin in phenol formaldehyde resin. Part 1. Partial replacement of phenol by kraft lignin in phenol formaldehyde adhesives for plywood10.1163/156856198X00542 ↗
14. Synthesis and characterization of phenol-formaldehyde resin using enzymatic hydrolysis lignin10.1016/j.jiec.2014.06.016 ↗
15. Preparation and characterization of phenol–formaldehyde adhesives modified with enzymatic hydrolysis lignin10.1016/j.biortech.2009.09.085 ↗
16. Preparation and characterization of novolac phenol–formaldehyde resins with enzymatic hydrolysis lignin10.1016/j.jtice.2015.03.023 ↗
17. Phenol Formaldehyde Resin Modification with Lignin10.1081/PPT-120023103 ↗
18. Preparation and properties of lignin–phenol–formaldehyde resins based on different biorefinery residues of agricultural biomass10.1016/j.indcrop.2012.07.037 ↗
19. Lignocellulosic ethanol residue-based lignin–phenol–formaldehyde resin adhesive10.1016/j.ijadhadh.2012.08.004 ↗
20. Replacing 100% of phenol in phenolic adhesive formulations with lignin10.1002/app.45124 ↗
21. Hu TQ · 2002
22. Highly efficient de-polymerization of organosolv lignin using a catalytic hydrothermal process and production of phenolic resins/adhesives with the depolymerized lignin as a substitute for phenol at a high substitution ratio10.1016/j.indcrop.2012.10.033 ↗
23. Sustainable bio-based phenol-formaldehyde resoles using hydrolytically depolymerized kraft lignin10.3390/molecules22111850 ↗
24. S/G ratio and lignin structure among Eucalyptus hybrids determined by Py-GC/MS and nitrobenzene oxidation10.1016/j.jaap.2013.01.015 ↗
25. Improved Protocol for Alkaline Nitrobenzene Oxidation of Woody and Non-Woody Biomass10.1080/02773813.2014.902965 ↗
26. Hydroxypropyl Sulfonated Lignin as Dye Dispersant: Effect of Average Molecular Weight10.1021/acssuschemeng.5b00821 ↗
27. Preparation of Organic/Inorganic Composite Phenolic Resin and Application in Al2O3-C Refractories10.1111/ijac.12426 ↗
28. Catalytic graphitization of novolac resin for refractory applications10.1016/j.ceramint.2017.11.167 ↗
29. Role of catalytic agents and processing parameters in the graphitization process of a carbon-based refractory binder10.1016/j.ceramint.2015.07.115 ↗
30. Jansen H · 2007 · 95
31. Bartha P · 2005
32. Synthesis and graphitization of resole resins by ferrocene10.1016/j.pnsc.2019.01.005 ↗
33. Structural evolution during the catalytic graphitization of a thermosetting refractory binder and oxidation resistance of the derived carbons10.1016/j.matchemphys.2018.03.029 ↗
34. Preparation and characterization of lignin demethylated at atmospheric pressure and its application in fast curing biobased phenolic resins10.1039/C6RA11966B ↗
35. Extraction and characterization of lignin from different biomass resources10.1016/j.jmrt.2014.10.009 ↗
36. Characterisation of structure-dependent functional properties of lignin with infrared spectroscopy10.1016/j.indcrop.2004.04.022 ↗
37. Evaluating lignin-rich residues from biochemical ethanol production of wheat straw and olive tree pruning by FTIR and 2D-NMR10.1155/2015/314891 ↗
38. Simplified determination of lignin content in hard and soft woods via uv-spectrophotometric analysis of biomass dissolved in ionic liquids10.15376/biores.5.3.1366-1383 ↗
39. Comparative studies of brown coal and lignin. i. infra-red spectra10.1071/CH9600156 ↗
40. Infrared absorption spectra of methylenedioxy and aryl ether groups10.1021/ac60126a014 ↗
41. Infrared spectra of lignin and related compounds. II. Conifer lignin and model compounds10.1021/jo01073a026 ↗
42. TGA-FTIR analysis of torrefaction of lignocellulosic components (cellulose, xylan, lignin) in isothermal conditions over a wide range of time durations
43. Byko VI · 2008 · 43
44. Carbon nanostructure of Kraft lignin thermally treated at 500 to 1000°C10.3390/ma10080975 ↗
45. Lignin pyrolysis reactions10.1007/s10086-016-1606-z ↗
46. Pyrolysis behavior of Japanese cedar wood lignin studied with various model dimers10.1016/j.jaap.2007.11.002 ↗
47. Structural, thermal and rheological behavior of a bio-based phenolic resin in relation to a commercial resol resin10.1016/j.indcrop.2012.06.004 ↗
48. Physico-chemical characterization of lignins from different sources for use in phenol–formaldehyde resin synthesis10.1016/j.biortech.2006.05.042 ↗
49. Characterization of phenol-formaldehyde prepolymer resins by in line FT-IR spectroscopy
50. The thermal stability and pyrolysis mechanism of boron-containing phenolic resins: the effect of phenyl borates on the char formation10.1016/j.apsusc.2015.01.062 ↗
51. Boron-assisted transformation to rod-like graphitic carbons from multi-walled carbon nanotubes in boron-mixed multi-walled carbon nanotube solids10.1021/am200335n ↗
52. Characterization of boron containing graphite using TEM and EELS10.1017/S143192760210599X ↗
53. Mechanisms involved in the formation of onionlike carbon nanostructures synthesized by ion implantation at high temperature10.1103/PhysRevB.65.132103 ↗
54. Modification on graphite due to helium ion irradiation10.1016/j.physleta.2016.05.044 ↗
55. Synthesis and properties of magnetic carbon nanocages particles for dye removal10.1155/2015/604201 ↗
56. The synthesis of multi-walled carbon nanotubes (MWNTs) by catalytic pyrolysis of the phenol-formaldehyde resins10.1016/j.physe.2006.10.013 ↗
57. Beatty RL · 1974
58. Comparative XRD, Raman, and TEM study on graphitization of PBO-derived carbon fibers10.1021/jp2084499 ↗
59. New perspectives on the structure of graphitic carbons10.1080/10408430500406265 ↗
60. Reactions of solid carbon with gases and liquids10.1039/tf9383401022 ↗
61. Graphitization of phenolic resins for carbon-based refractories10.1016/j.ceramint.2017.03.143 ↗
62. Oxidation of carbon derived from phenolic resin10.1016/0008-6223(78)90109-4 ↗