journal article·2017-05-15Open access

Microstructural Characterization and Influence of Ceramography Method on the Microhardness of Sintering Agents Added Silicon Carbide

Danilo Corrêa Gonçalves, Gisele Teixeira Saleiro, Philipe Cardoso Matias, Alaelson Vieira Gomes, Vitor Ramos, José Brant Brant de Campos, Francisco Cristovão Lourenço de Melo, Eduardo Sousa Lima

Materials Research· Volume 20· Issue suppl 2

Abstract

This study carried out the microstructural characterization, by light microscopy, of sintered SiC in the presence of liquid phase at temperatures of 1800, 1850 and 1900 ºC, added with Al2O3 and Y2O3 as well with Al2O3-YAG composite in the proportions of 5, 10 and 15% by weight. It was possible to observe the formation of microstructural patterns resulting from the heterogeneous segregation of the additives, such observation is associated to the pulling of additives during the initial stage of ceramography. Two ceramographic paths were followed: method I - surface grinding followed by manual polishing and method II - automatic grinding and polishing. In order to compare the two techniques the analysis of 3D roughness by light interferometry and the Vickers microhardness test were used. It was concluded by the analysis of variance with 95% confidence that the degree of finishing obtained by both methods allowed the adequate microstructural characterization, as well as, to meet the requirements established by the ASTM C1327-15 standard for hardness test.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Militar de Engenharia, Brazil

Universidade do Estado do Rio de Janeiro, Brazil

Instituto de Aeronáutica e Espaço, Brazil

References (13)

Show source-provided references
1. Evans RS · 414
2. Geels K · 2007
3. Machado AR · 2009
4. 2015
5. 2015
6. Pull-out During Grinding of Ceramics Containing an Amorphous Phase
7. Täffner U · 2004
8. Synthesis and characterization of Al2O3 -YAG composite and Al2O3-YAG and Al2O3 with Nb2O5 additives10.1590/S0366-69132012000100004 ↗
9. Microstructure of Al2O3-YAG eutectic composite
10. da Silva VC
11. Comparing preparation techniques using microstructural images of ceramic materials
12. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
13. Effect of Weight Loss on Liquid-Phase-Sintered Silicon Carbide10.1111/j.1151-2916.1997.tb02945.x ↗