Substrate Coating Produced via Additive Manufacturing with Conducting Polymers: Assessment in The Development of Electrodes
Source abstract
Abstract
The production of conductive and organic devices from a 3D printer represents a promising strategy for several areas. In particular, the synthesis of polypyrrole-coated acrylonitrile butadiene styrene (ABS) composites can be considered an important step to produce conductive supports for 3D printing. Herein, it is reported the production of ABS samples through the additive manufacturing process (3D printing) accordingly to the Fused Deposition Modeling (FDM) method. The hydrophilic behavior was controlled by the surface treatment using air plasma for the following step of coating with polypyrrole (PPy) via an in situ polymerization, using two different oxidants: ferric chloride (FeCl3.6H2O) and ammonium persulfate (APS). The chemical, optical, surface, and electrical properties of these materials were characterized through Fourier Transform infrared spectroscopy (FTIR), contact angle measurements, cyclic voltammetry, Scanning Electron Microscopy (SEM), 4-probe electrical measurement, and mechanical tensile testing. The ABS/PPy (FeCl3) composite exhibited a low electrical contact resistance and better performance for applications that require electrodes with a good conductance level.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Pernambuco, Brasil
Universidade Federal do Vale do São Francisco, Brasil
References (54)
Show source-provided references
1. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
2. 3D printing of ceramics: a review
3. Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: a review on processes, materials and designs10.1002/jor.23075 ↗
4. 3D Printing: applications in evolution and ecology10.1002/ece3.5050 ↗
5. 3D printed functional nanomaterials for electrochemical energy storage10.1016/j.nantod.2017.06.007 ↗
6. A critical review of the use of 3-D printing in the construction industry10.1016/j.autcon.2016.04.005 ↗
7. Kira WS · 2015
8. 3D printing for electrocatalytic applications10.1016/j.joule.2019.06.010 ↗
9. Multifunctional 3D nanoarchitectures for energy storage and conversion10.1039/B801151F ↗
10. Structuring materials for lithium-ion batteries: advancements in nanomaterial structure, composition, and defined assembly on cell performance10.1039/c4ta00534a ↗
11. Elwood J · 2019 · 1230
12. Self-healing, adaptive and conductive polymer composite ink for 3D printing of gas sensors10.1039/C8TC01092G ↗
13. 3D-printable conductive materials for tissue engineering and biomedical applications10.1016/j.bprint.2021.e00166 ↗
14. 3D-Printed PCL/PPy conductive scaffolds as three-dimensional porous Nerve Guide Conduits (NGCs) for peripheral nerve injury repair10.3389/fbioe.2019.00266 ↗
15. Lawrence MT · 2021 · 70
16. An overview on 3D printing technology: technological, materials, and applications10.1016/j.promfg.2019.06.089 ↗
17. Conducting polymers and their applications10.2174/1877946811202030224 ↗
18. XPS studies of environmental stability of polypyrrole-poly (vinyl alcohol) composites10.1016/0379-6779(95)03285-1 ↗
19. Conducting Polymers: new electrochromic materials for advanced optical devices10.1080/10587259308032182 ↗
20. Polypyrrole-heparin composites as stimulus-responsive substrates for endothelial cell growth10.1002/(SICI)1097-4636(199902)44:2<121::AID-JBM1>3.0.CO;2-A ↗
21. Polypyrrole-coated electrospun polystyrene films as humidity sensors10.1016/j.talanta.2021.122636 ↗
22. Preparation of hydrophobic surface on PLA and ABS by fused deposition modeling10.3390/polym12071539 ↗
23. Water decontamination by polyoxometalate-functionalized 3D-printed hierarchical porous devices10.1039/C8CC00821C ↗
24. Enhancing the mechanical performance of additive manufactured polymer components using atmospheric plasma pre-treatments10.1002/ppap.201700141 ↗
25. A facile and general strategy to deposit polypyrrole on various substrates for efficient solar‐driven evaporation
26. Influence of magnetic field on morphological structures and physiological characteristics of bEnd.3 cells cultured on polypyrrole substrates10.1039/C9RA07180F ↗
27. Conductivity, superhydrophobicity and mechanical properties of cotton fabric treated with polypyrrole by in-situ polymerization using the binary oxidants ammonium Peroxodisulfate and ferric chloride10.1177/0040517518792732 ↗
28. Synthesis and characterization of conductive polypyrrole: the influence of the oxidants and monomer on the electrical, thermal, and morphological properties10.1155/2018/4191747 ↗
29. Wettability of conducting polymer: from superhydrophilicity to superoleophobicity10.1016/j.progpolymsci.2013.10.003 ↗
30. Reversible conversion of conducting polymer films from superhydrophobic to superhydrophilic10.1002/anie.200500868 ↗
31. Conductivity, superhydrophobicity and mechanical properties of cotton fabric treated with polypyrrole by in-situ polymerization using the binary oxidants ammonium Peroxodisulfate and ferric chloride10.1177/0040517518792732 ↗
32. A comparative experimental study of additive manufacturing feasibility faced to injection molding process for polymeric parts10.1007/s00170-020-05849-y ↗
33. Xiaoran L · 2018
34. The mechanical and physical properties of 3D-printed materials composed of ABS-ZnO nanocomposites and ABS-ZnO microcomposites10.3390/mi11060615 ↗
35. Design of FDM 3D printed polymers: an experimental-modelling methodology for the prediction of mechanical properties10.1016/j.matdes.2019.108414 ↗
36. The effects of voids on structural properties of fused deposition modelled parts: a probabilistic approach10.1007/s00170-018-2148-x ↗
37. Optimization of Abs 3D-printing method and parameters10.33422/ejest.v3i1.160 ↗
38. Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling10.1108/13552540310489604 ↗
39. Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts10.15446/ing.investig.v36n3.56610 ↗
40. FT-IR methodology (transmission and UATR) to quantify automotive systems10.1590/0104-1428.2412 ↗
41. Smith AL · 1979
42. Degradation classification of 3D printing thermoplastics using fourier transform infrared spectroscopy and artificial neural networks10.3390/app8081224 ↗
43. Thermal behavior of vehicle plastic blends contained acrylonitrile-butadiene-styrene (ABS) in pyrolysis using TG-FTIR10.1016/j.wasman.2017.01.034 ↗
44. Selective separation of ABS/PC containing BFRs from ABSs mixture of WEEE by developing hydrophilicity with ZnO coating under microwave treatment10.1016/j.jhazmat.2017.01.027 ↗
45. Sulfur-polypyrrole composite cathodes for lithium-sulfur batteries10.1039/c2ra20393f ↗
46. Study of polypyrrole aging by XPS, FTIR and conductivity measurements10.1016/j.polymdegradstab.2015.07.021 ↗
47. Cationic dyes as morphology-guiding agents for one-dimensional polypyrrole with improved conductivity10.1016/j.polymer.2019.04.045 ↗
48. Synthesis of highly conductive polypyrrole nanoparticles via microemulsion polymerization
49. Conducting electrospun polycaprolactone/polypyrrole fibers10.1016/j.synthmet.2017.11.011 ↗
50. Magnetite/polypyrrole hybrid nanocomposites as a promising magnetic resonance imaging contrast material10.1002/app.38481 ↗
51. Polypyrrole-Tantalum disulfide composite: an efficient material for fabrication of room temperature operable humidity sensor.10.1016/j.sna.2019.111593 ↗
52. Flexible supercapacitors based on a ternary composite of polyaniline/polypyrrole/graphite on gold coated sandpaper10.1016/j.electacta.2018.04.063 ↗
53. Electrochemical properties of solid leather wastes based supercapacitor electrodes using H2SO4 electrolyte10.1016/j.matlet.2017.06.048 ↗
54. Novel chemical synthesis of polypyrrole thin film electrodes for supercapacitor application10.1016/j.eurpolymj.2013.07.032 ↗