Microstructure and Wear Properties of a Low Carbon Bainitic Steel on Plasma Nitriding at Different N2-H2 Gas Mixtures
Source abstract
Abstract
For the first time, the influence of gas mixture on first damage resistance of a plasma nitrided DIN 18MnCrSiMo6-4 bainitic steel was investigated. Samples were nitrided at 500 C with three different N 2 -H 2 gas mixtures, containing 5, 24, and 76 vol.% N 2 . Samples were characterized concerning the resulting roughness, microstructure, compound layer's phase composition, residual stresses in the diffusion zone, and surface hardness. Tribological ball-on-flat tests were carried out in reciprocal mode using zirconia as ball material for friction coefficient and the compound layer resistance until the first damage. The test results were evaluated statistically by analysis of variance (ANOVA). As the amount of nitrogen in the gas mixture decreases, the -Fe 2-3 (C)N content in the compound layer decreases. A '-Fe 4 N monophasic compound layer was achieved at 5 vol.% N 2 gas mixture. The diffusion zone as expected presented compressive residual stresses with the highest values near the surface. In the tribological tests, better results were obtained for 5 and 24 vol.% N 2 in the gas mixture as higher amounts of '-Fe 4 N were formed. The 76 vol.% N 2 gas mixture led to a brittle behavior, due to the biphasic compound layer ('-Fe 4 N and -Fe 2-3 (C)N) with a predominant content of -Fe 2-3 (C)N.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal do Rio Grande do Sul, Brasil
Universidade Tecnológica Federal do Paraná, Brasil
Pontifícia Universidade Católica do Paraná, Brasil
References (52)
Show source-provided references
1. Effect of tempering on microstructure and mechanical properties of a non-quenched bainitic steel10.1016/j.msea.2010.02.010 ↗
2. Nitrieren von hochfesten, bainitischen Langprodukten*10.3139/105.110226 ↗
3. Critical assessment 22: bainitic forging steels10.1080/02670836.2015.1114272 ↗
4. Constitutive modelling of high temperature flow behaviour for a low carbon high silicon bainitic steel10.1590/1980-5373-mr-2020-0264 ↗
5. In situ investigation of the bainitic transformation from deformed austenite during continuous cooling in a low carbon Mn-Si-Cr-Mo steel10.1007/s11661-020-05800-6 ↗
6. Influence of hot forging parameters on a low carbon continuous cooling bainitic steel microstructure10.3390/met10050601 ↗
7. Two-step continuous cooling heat treatment applied in a low carbon bainitic steel10.1590/1980-5373-mr-2020-0334 ↗
8. Effect of compressive deformations on the final microstructure of a low carbon high silicon bainitic steel thermomechanically processed10.1590/1980-5373-mr-2020-0346 ↗
9. Hasler L · 2011
10. Residual stresses and structural changes generated at different steps of the manufacturing of gears: effect of banded structures10.1016/j.msea.2011.03.004 ↗
11. Residual stress interaction on gear manufacturing10.1016/j.jmatprotec.2017.09.017 ↗
12. Study of microstructural development of bainitic steel using eddy current and synchrotron XRD in-situ measurement techniques during thermomechanical treatment10.3139/105.110402 ↗
13. Design of novel high strength bainitic steels: part 210.1179/026708301101510357 ↗
14. Theoretical design and advanced microstructure in super high strength steels10.1016/j.matdes.2008.08.042 ↗
15. Influence of bainite morphology on impact toughness of continuously cooled cementite free bainitic steels10.1179/1743284710Y.0000000047 ↗
16. Design of advanced bainitic steels by optimisation of TTT diagrams and T0 curves10.2355/isijinternational.46.1479 ↗
17. Microstructure and residual stresses of a plasma-nitrided M2 tool steel10.1016/S0257-8972(99)00063-8 ↗
18. Analysis and prediction of residual stresses in nitrided tool steel10.4028/www.scientific.net/MSF.681.352 ↗
19. Tribological properties of plasma and pulse plasma nitrided AISI 4140 steel10.1016/S0257-8972(98)00571-4 ↗
20. Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests10.1016/j.surfcoat.2010.07.053 ↗
21. Influence of plasma nitriding with a nitrogen rich gas composition on the reciprocating sliding wear of a DIN 18MnCrSiMo6-4 steel10.1590/1980-5373-mr-2020-0592 ↗
22. Response of a DIN 18MnCrSiMo6-4 continuous cooling bainitic steel to plasma nitriding with a nitrogen rich gas composition10.1590/1980-5373-mr-2020-0036 ↗
23. Response of a DIN 18MnCrSiMo6-4 Continuous cooling bainitic steel to different plasma nitriding gas mixtures10.1590/1980-5373-mr-2020-0269 ↗
24. The investigation of mechanical properties of ion-nitrided AISI 5140 low-alloy steel10.1016/S1044-5803(02)00275-9 ↗
25. Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration10.1093/nar/gkr900 ↗
26. 2020
27. Profex: a graphical user interface for the Rietveld refinement program BGMN10.1107/S1600576715014685 ↗
28. 2017
29. 1979
30. 2002
31. 2008
32. 2005
33. Microbial corrosion of galvanized steel in a simulated recirculating cooling tower system10.1016/j.corsci.2009.08.049 ↗
34. Effects of different variants of plasma nitriding on the properties of the nitrided layer10.1007/s11665-019-04292-9 ↗
35. Cullity BD · 1978
36. Residual stress profiles of plasma nitrided steels10.1179/026708499101516489 ↗
37. Modelling of residual stress profiles in plasma nitrided tool steel10.1016/j.matchar.2007.03.009 ↗
38. Microstructures and mechanical properties of surface-hardened layer produced on SKD 61 steel by plasma radical nitriding10.1016/j.msea.2006.02.412 ↗
39. Estimation of fracture toughness of nitride compound layers on tool steel by application of the Vickers indentation method10.1016/j.surfcoat.2005.11.077 ↗
40. Three-dimensional characterisation of plasma nitrided surface topography10.1179/sur.1994.10.4.279 ↗
41. Compound layer formation during plasma nitriding and plasma nitrocarburising10.1179/sur.1993.9.1.69 ↗
42. Topography evolution and friction coefficient of gray and nodular cast irons with duplex plasma nitrided + DLC coating10.1016/j.surfcoat.2016.09.035 ↗
43. Effect of gas mixture on tribological performance of plasma nitrided grey cast iron under dry and lubricated conditions10.1088/2053-1591/ab012b ↗
44. Duplex plasma treatment of AISI D2 tool steel by combining plasma nitriding (with and without white layer) and post-oxidation
45. Scratch resistance of low-temperature plasma nitrided and carburized martensitic stainless steel10.1016/j.wear.2017.01.112 ↗
46. Effect of microstructure and thickness on the friction and wear behavior of CrN coatings10.1016/j.wear.2013.02.005 ↗
47. Surface mechanics and wear resistance of supermartensitic stainless steel nitrided by plasma immersion ion implantation10.1016/j.surfcoat.2018.08.079 ↗
48. Investigation into reciprocating dry sliding friction and wear properties of bulk CoCrFeNiMo high entropy alloys fabricated by spark plasma sintering and subsequent cold rolling processes: role of Mo element concentration
49. Effect of different surface states before plasma nitriding on properties and machining behavior of M2 high-speed steel10.1016/S0257-8972(02)00768-5 ↗
50. Nitrided layer embrittlement due to edge effect on duplex treated AISI M2 high-speed steel10.1016/S0257-8972(03)00795-3 ↗
51. Ti–Cp: eletrochemical behaviour under slurry erosion wear10.1007/s40735-020-00442-y ↗
52. A methodology to determine surface durability in multifunctional coatings applied to soft substrates10.1016/j.triboint.2005.07.015 ↗