journal article·2018-04-12Open access

Assessment of Chemical and Mechanical Properties of Polymers Aiming to Replace the Stainless Steel in Distillation Column

Caroline Barlette da Cunha, Poliana Pollizello Lopes, Flávio Dias Mayer, Ronaldo Hoffmann

Materials Research· Volume 21· Issue 3

Abstract

Small scale ethanol production process faces a number of challenges that negatively impact productivity and economic costs. The present work aims at finding alternative materials with lower cost and suitable resistance to replace the stainless steel commonly used in distillation columns in small scale businesses. For that we analyzed the chemical and mechanical behavior of nine different polymeric materials. An important parameter to consider in this case is the compatibility of polymer with the ethanol, which was determined according to the ASTM D543, as well as the swelling degree and ethanol diffusion in material being also studied in this work. Three-point flexural tests were performed because the material when in service is subjected to forces or loads. The results show that some of the materials under test present chemical resistance and satisfactory mechanic performance after the contact with the ethanol in temperatures compatible with the distillation process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de Santa Maria, Brazil

References (39)

Show source-provided references
1. Santos GR · 2016
2. Evaluation of the technical and economic feasibility of ethanol production in a pilot plant using sweet potatoes
3. Why small-scale fuel ethanol production in Brazil does not take off?10.1016/j.rser.2014.11.076 ↗
4. Optimization and Dynamics of Distillation Column Using Aspen Plus®10.1016/j.proeng.2016.06.484 ↗
5. A novel potential application of SiC ceramic foam material to distillation: foam monolithic tray10.1016/j.ces.2014.11.044 ↗
6. Suitability of Using Brass Ferrules as Packing in a Glass Distillation Column and Presenting a New Relationship Between HETP and pressure drop
7. Dehydration of ethanol with different salts in a packed distillation column10.1016/j.psep.2014.02.012 ↗
8. Hydrodynamic and mass transfer efficiency of ceramic foam packing applied to distillation10.1016/j.ces.2009.02.010 ↗
9. Effect of moisture content on extrusion process of kaolinitic-illitic clay in manufacturing of ceramic Raschig ring10.1016/j.jmatprotec.2007.09.013 ↗
10. Removal of Pb(II) in a packed-bed column by a Klebsiella sp. 3S1 biofilm supported on porous ceramic Raschig rings10.1016/j.jiec.2016.06.012 ↗
11. Investigation of thermal conductivity enhancement in bakelite-graphite particulate filled polymeric composite10.1016/j.ijengsci.2011.12.002 ↗
12. Optimization of surface treatment for flotation separation of polyvinyl chloride and polyethylene terephthalate waste plastics using response surface methodology10.1016/j.jclepro.2016.08.111 ↗
13. Estudo do polietileno de alta densidade reciclado para uso em elementos estruturais
14. External pressure induced buckling collapse of high density polyethylene (HDPE) liners: FEM modeling and predictions10.1016/j.tws.2015.04.035 ↗
15. Evaluation of the effect caused by a paraphinic oil on the physicochemical behavior of high-density polyethylene pipes
16. Water diffusion and swelling stresses in highly crosslinked epoxy matrices10.1016/j.polymdegradstab.2016.09.004 ↗
17. New approach for description of sorption and swelling phenomena in liquid + polymer membrane systems10.1016/j.seppur.2017.02.032 ↗
18. 2006
19. Environmental and Energy Assessment of Small Scale Ethanol Fuel Production10.1021/acs.energyfuels.5b01358 ↗
20. The impact of monomer sequence and stereochemistry on the swelling and erosion of biodegradable poly (lactic-co-glycolic acid) matrices10.1016/j.biomaterials.2016.11.037 ↗
21. Determination of Cellulose Crystallinity of Banana Residues Using Near Infrared Spectroscopy and Multivariate Analysis
22. 2002
23. 2009
24. FTIR Mapping: Polymer Swelling and Solvent Segregation in Benzene/Cyclohexane-Polyisoprene Rubber System10.1177/0095244304039429 ↗
25. Coupling effects of glass fiber treatment and matrix modification on the interfacial microstructures and the enhanced mechanical properties of glass fiber/polypropylene composites10.1016/j.compositesb.2016.12.016 ↗
26. Propriedades térmicas de compósitos de polipropileno e bentonita organofílica10.1590/S0104-14282012005000063 ↗
27. Effect of reprocessing cycles on the degradation of PP/PBAT-Thermoplastic starch blends10.1016/j.carbpol.2017.03.054 ↗
28. Novel HDPE nanocomposites containing aluminum nitride (nano) particles: Micro-structural and nano-mechanical properties correlation10.1016/j.matchemphys.2017.01.020 ↗
29. Novel polymer electrolyte based on PVDF/HDPE blending for lithium-ion battery10.1016/j.matlet.2013.03.033 ↗
30. Thermolysis of fibreglass polyester composite and reutilisation of the glass fibre residue to obtain a glass-ceramic material10.1016/j.jaap.2011.10.003 ↗
31. Development of crystalline phases in sintered glass-ceramics from residual E-glass fibres10.1016/j.ceramint.2013.10.040 ↗
32. Optimization of acrylic acid grafting onto polypropylene using response surface methodology and its biodegradability10.1016/j.radphyschem.2016.12.003 ↗
33. Degradation study of polypropylene (PP) and bioriented polypropylene (BOPP) in the environment10.1590/S1516-14392011005000080 ↗
34. Improvement of mechanical and thermal properties of high energy electron beam irradiated HDPE/hydroxyapatite nano-composite10.1016/j.radphyschem.2016.09.002 ↗
35. Mechanical and Thermal Properties of Polyamide 6/HDPE-g-MAH/High Density Polyethylene10.1016/j.proeng.2013.12.201 ↗
36. Composites based on HDPE filled with BaTiO3 submicrometric particles. Morphology, structure and dielectric properties10.1016/j.polymertesting.2013.08.012 ↗
37. Compósito de resina de poliéster insaturado com bagaço de cana-de-açúcar: influência do tratamento das fibras nas propriedades10.1590/S0104-14282010005000034 ↗
38. Thermal oxidation of vinyl ester and unsaturated polyester resins10.1016/j.polymdegradstab.2016.04.003 ↗
39. Alkyd resins based on hyperbranched polyesters and PET waste for coating applications10.1016/j.porgcoat.2016.10.015 ↗