journal article·2017-12-18Open access

Porous Titanium Associated with CaP Coating: In Vivo and In Vitro Osteogenic Performance

Luana Marotta Reis de Vasconcellos, Rodrigo Dias Nascimento, Carlos Alberto Alves Cairo, Daniel de Oliveira Leite, Evelyn Luzia de Souza Santos, Gabriela Esteves Campos, Renata Falchete do Prado, Maria Aparecida Neves Jardini, Luis Gustavo Oliveira de Vasconcellos, Yasmin Rodarte Carvalho

Materials Research· Volume 21· Issue 2

Abstract

This in vitro and in vivo study compared different topographies of Ti samples (dense, porosity of 30% and 40%) with or not CaP coating, prepared by powder metallurgy. Osteogenic cells from newborn rat calvaria were plated onto the samples and cell adhesion (24 hours), alkaline phosphatase activity (7 and 10 days) and mineralization nodules (14 days) were assessed. Sixteen rabbits were used for in vivo study. Each animal received three non-treated and three treated implants in the right or left tibia, respectively. Histometric evaluation of bone-implant contact (BIC) were assessed at 1, 2, 4 and 8 weeks. Metallographic analysis revealed porosities of 30% and 40%, with pore size ranging from 250 to 350 µm. Cell adhesion test and ALP revealed similar cell behavior, independently of topography and CaP coating (P > 0.05%). However, CaP coating combined with porosity of 40% influenced positively the mineralized matrix formation (P < 0.05%). CaP-coated implants showed higher BIC than non-CaP implants and BIC was different between the short (1 and 2 weeks) and long (4 and 8 weeks) healing periods (P < 0.05%). The results suggest that CaP coating combined with 40% porosity implants allowed greater osteogenesis in vitro and increased BIC in vivo.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Estadual Paulista, Brazil

Instituto de Divisão de Materiais, Ar e Espaço, Brazil

References (42)

Show source-provided references
1. Porous titanium scaffolds produced by powder metallurgy for biomedical applications10.1590/S1516-14392008000300008 ↗
2. Initial evaluation of bone ingrowth into a novel porous titanium coating10.1002/jbm.b.31624 ↗
3. Direct visualization and quantification of bone growth into porous titanium implants using micro computed tomography
4. Evaluating Osseointegration into a Deeply Porous Titanium Scaffold: A Biomechanical Comparison with PEEK and Allograft10.1097/BRS.0000000000001672 ↗
5. Osteoblast precursor cell activity on HA surfaces of different treatments10.1002/(SICI)1097-4636(199802)39:2<176::AID-JBM2>3.0.CO;2-M ↗
6. Design of dental implants, influence on the osteogenesis and fixation
7. A histological assessment of the initial healing response adjacent to porous-surfaced, titanium alloy dental implants in dogs10.1177/00220345860650080501 ↗
8. The endopore implant-enhanced osseointegration with a sintered porous-surfaced design
9. Subantral augmentation with porous titanium in experiment and clinic
10. Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects10.1002/jor.22293 ↗
11. Novel production method of porous surface Ti samples for biomedical application
12. Implantation with new three-dimensional porous titanium web for treatment of parietal bone defect in rabbit10.1111/aor.12058 ↗
13. Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surface Releasing Silver Ions10.1021/acsami.6b03152 ↗
14. Titanium-35niobium alloy as a potential material for biomedical implants: In vitro study10.1016/j.msec.2015.07.026 ↗
15. Porous titanium and Ti-35Nb alloy: effects on gene expression of osteoblastic cells derived from human alveolar bone
16. In vitro and in vivo performance of bioactive Ti6Al4V/TiC/HA implants fabricated by a rapid microwave sintering technique10.1016/j.msec.2014.06.015 ↗
17. Osteoblast response to porous titanium and biomimetic surfasse. In vitro analysis10.1016/j.msec.2015.03.028 ↗
18. Mechanics considerations for microporous titanium as an orthopedic implant material10.1002/jbm.a.20100 ↗
19. Synthesis of porous titanium implants by environmental-electro-discharge-sintering process10.1016/j.matchemphys.2005.06.011 ↗
20. Fabrication methods of porous metals for use in orthopaedic applications10.1016/j.biomaterials.2005.12.002 ↗
21. Processing of a porous titanium alloy from elemental powders using a solid state isothermal foaming technique
22. Synthesis of hierarchically porous structured CaCO3 and TiO2 replicas by sol-gel method using lotus root as template10.1016/j.msec.2016.04.092 ↗
23. Porous titanium for biomedical applications: an experimental study on rabbits10.4317/medoral.15.e407 ↗
24. In vitro osteoclast-like and osteoblast cells' response to electrospun calcium phosphate biphasic candidate scaffolds for bone tissue engineering
25. Characterization of a bovine collagen hydroxyapatite composite scaffold for bone tissue engineering10.1016/S0142-9612(03)00410-1 ↗
26. Ultrastructural characterization and immunolocalization of osteopontin in rat calvarial osteoblast primary cultures10.1002/(SICI)1097-0029(19960201)33:2<214::AID-JEMT11>3.0.CO;2-X ↗
27. Properties of porous magnesium prepared by powder metallurgy10.1016/j.msec.2012.10.002 ↗
28. Composition of bone and apatitic biomaterials as revealed by intravital Raman microspectroscopy10.1016/j.bone.2005.02.012 ↗
29. Tantalum implanted entangled porous titanium promotes surface osseointegration and bone ingrowth10.1038/srep26248 ↗
30. Hybrid Macro-Porous Titanium Ornamented by Degradable 3D Gel/nHA Micro-Scaffolds for Bone Tissue Regeneration10.3390/ijms17040575 ↗
31. Titanium metals form direct bonding to bone after alkali and heat treatments10.1016/S0142-9612(00)00443-9 ↗
32. Cancellous bone from porous Ti6Al4V by multiple coating technique
33. Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: three-dimensional micro-CT based structural analyses of porous bioactive titanium implants10.1016/j.biomaterials.2006.08.013 ↗
34. Biomimetic calcium phosphate coating on Ti-7.5Mo alloy for dental application
35. In vivo evaluation of a biomimetic apatite coating grown on titanium surfaces10.1002/jbm.a.30028 ↗
36. Bone formation following implantation of titanium sponge rods into humeral osteotomies in dogs: a histological and histometrical study10.1111/j.1708-8208.2008.00132.x ↗
37. Interaction between mesenchymal stem cells and Ti-30Ta alloy after surface treatment10.1002/jbm.a.34891 ↗
38. Optimization of surface micromorphology for enhanced osteoblast responses in vitro
39. Topography effects of pure titanium substrates on human osteoblast long-term adhesion10.1016/j.actbio.2004.11.009 ↗
40. Effect of cpTi surface roughness on human bone marrow cell attachment, proliferation, and differentiation10.1590/S0103-64402003000100003 ↗
41. The influence of surface energy of titanium-zirconium alloy on osteoblast cell functions in vitro10.1002/jbm.a.33013 ↗
42. Biomechanical comparison of biomimetically and electrochemically deposited hydroxyapatite-coated porous titanium implants10.1016/j.joms.2009.09.014 ↗