journal article·2017-11-21Open access

Microstructural Evolution and Phase Transformation in Laser Cladding of Cr and Mo Powder on Grey Cast Iron: Mixture Design of Experiment (DOE)

Abd Rahman Zulhishamuddin, Reza Mohamed Suffian, Syarifah Nur Aqida, Maarof Mohd Rashidi

Materials Research· Volume 21· Issue 1

Abstract

Laser cladding on grey cast iron at high power processing was investigated for microstructural evolution and phase transformation to enhance surface properties. Cladding was designed using a mixture of DOE with peak power (Pp) and pulse repetition frequency (PRF), and a mixture component of Cr and Mo ratio as factors. Microstructural findings indicated absolute elimination of graphite phase from the clad zone, in conjunction with particles evolution occurrence. Meanwhile, Cr, Mo and Fe phases were detected on the clad surface, along with M-C carbide, retained austenite and MoFe formation. The clad surface with addition of Mo exhibited a high hardness value of 945.5 HV0.1 due to carbide formation. As a result of high peak power penetration into substrate surface, the depth range of clad zone was 53 to 131 µm. From the optimisation, the highest desirability is 82.3 %. Cladding with molybdenum powder addition was found to have produced minimum surface roughness, maximum depth and hardness of 9.14 µm, 110 µm and 891.1 HV0.1, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universiti Malaysia Pahang, Malaysia

Universiti Malaysia Pahang, Malaysia; Universiti Malaysia Pahang, Malaysia

References (23)

Show source-provided references
1. The mechanism of changes in the surface layer of grey cast iron automotive brake disc10.1590/S1516-14392005000400020 ↗
2. The relationship between flake graphite orientation, smearing effect, and closing tendency under abrasive wear conditions10.1016/j.wear.2014.05.015 ↗
3. Corrosion characteristics of duplex surface-treated spheroidal graphite cast iron10.1016/S0257-8972(01)01230-0 ↗
4. Cylinder liner wear in low speed diesel engines10.1016/0301-679X(78)90056-7 ↗
5. Comparison of the influence of molybdenum and chromium TIG surface alloying on the microstructure, hardness and wear resistance of ADI10.1016/j.jmatprotec.2007.11.157 ↗
6. Thermal fatigue characteristics of gray cast iron with non-smooth surface treated by laser alloying of Cr powder10.1016/j.surfcoat.2007.09.014 ↗
7. Improved fatigue wear resistance of grey cast iron by localized laser carburizing10.1016/j.msea.2015.07.046 ↗
8. The Effect of Dynamic Local Self-Preheating in Laser Cladding on Grey Cast Iron10.5545/sv-jme.2014.1807 ↗
9. Preliminary study of on cladding process on grey cast iron substrate10.15623/ijret.2013.0211002 ↗
10. Microstructural study of surface melted and chromium surface alloyed ductile iron10.1016/j.apsusc.2012.04.014 ↗
11. The comparative study of W/Cr addition in Fe-base by laser surface alloying on fatigue wear resistance of GCI10.1016/j.surfcoat.2015.12.009 ↗
12. Birkholz M · 2006 · 1
13. Corrosion and wear resistance characteristics of NiCr coating by laser alloying with powder feeding on grey iron liner10.1016/j.wear.2005.09.033 ↗
14. Investigation of nanomechanical properties and thermal fatigue resistance of grey cast iron processed by laser alloying10.1016/j.jallcom.2014.11.169 ↗
15. Effect of rapid solidification on the microstructure and microhardness of BS1452 grade 250 hypoeutectic grey cast iron10.1016/j.jallcom.2016.08.214 ↗
16. Laser Surface Modification of AISI 1025 Low Carbon Steel using Pulsed Nd:YAG Laser for Enhanced Surface Properties10.4028/www.scientific.net/KEM.554-557.596 ↗
17. Surface modification of AISI H13 tool steel by laser cladding with NiTi powder10.1007/s00339-016-9937-6 ↗
18. Effect of Powder Characteristics on Properties of Warm-Sprayed WC-Co Coatings10.1007/s11666-009-9438-7 ↗
19. Formation of eutectic carbides in Fe-Cr-Mo-C alloy during non-equilibrium crystallization10.1016/j.matdes.2016.01.028 ↗
20. Microstructure Formation and Fracturing Characteristics of Grey Cast Iron Repaired Using Laser
21. Microstructure refinement of hypereutectic high Cr cast irons using hard carbide-forming elements for improved wear resistance10.1016/j.wear.2013.01.079 ↗
22. Microstructure and properties of laser surface alloyed PM austenitic stainless steel
23. Laser surface hardening of grey cast iron used for piston ring10.1361/105994902770344105 ↗