Effect of Weathering and Accelerated Photoaging on PET/PC (80/20 wt/wt%) Melt Extruded Blend
Source abstract
Abstract
In this study we investigated the natural weathering of a catalyzed blend of poly(ethylene terephthalate)/polycarbonate PET/PC (80/20wt/wt%). The results were compared to the accelerated photoaging tests. The specimens were characterized by wide angle X-ray diffraction (WAXD), optical microscopy (OM), thermogravimetry (TG/DTG), medium infrared spectroscopy (FT-IR) and stress-strain analysis. The OM analysis revealed the coexistence of at least three phases – one rich in PET (matrix), the other rich in PC (dispersed droplet) and an interfacial region between them, made of PET/PC copolymer (compatibilizing agent) produced in situ. The TG/DTG curves showed that UV radiation acted mainly on the PET-rich phase and the PET/PC copolymer. The OM and TG/DTG results indicated that the degradation of the compatibilizing agent has had a critical effect on the mechanical properties. For both types of aging (natural and accelerated), the PET’s carbonyl index decreased with the exposure time. The FT-IR results corroborated what was seen in the OM images, showing that the PET phase acts as a shield against the PC degradation. Under accelerated aging, the mechanical properties decreased abruptly - mainly the stress-strain at yield and break - due to the degradation of the in situ compatibilizing agent.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Microplastics and Plastic Pollution · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal do Rio de Janeiro, Brazil
References (19)
Show source-provided references
1. PET/PC blends: Effect of chain extender and impact strength modifier on their structure and properties10.1002/app.32532 ↗
2. Thermal and Mechanical Properties of Polyethylene Terephthalate/Polycarbonate Nanocomposites Modified by Lanthanum Acetyl Acetonate Hydrate10.1080/03602559.2010.551382 ↗
3. Essential work of fracture testing of PC-rich PET/PC blends with and without transesterification catalysts10.1007/s10853-010-4282-1 ↗
4. Solid state polymerization: It is action on thermal and rheological properties of PET/PC reactive blends
5. Structures and properties of ternary blends of recycled poly(ethylene terephthalate)/bisphenol-A polycarbonate/(E/nBA/GMA)10.1002/app.27348 ↗
6. Changes in properties of PET/PC blend by catalyst and time10.1080/00914030701816045 ↗
7. Immiscible blends of PC and PET, current knowledge and new results: rheological properties10.1002/mame.200700006 ↗
8. Properties of ultrasound-assisted blends of poly(ethylene terephthalate) with polycarbonate10.1016/j.jiec.2012.07.006 ↗
9. Rheological study bringing new insights into PET/PC reactive blends10.1002/masy.201050414 ↗
10. 2014
11. 2013
12. 2013
13. The thermal degradation of PET and analogous polyester measured by thermal analysis-Fourier transform infrared spectroscopy10.1016/S0032-3861(01)00775-3 ↗
14. Photodegradation of bisphenol A polycarbonate10.1016/j.polymdegradstab.2006.12.003 ↗
15. Influence of cobalt complex on thermal properties of poly(ethylene terephthalate)/polycarbonate blend10.1007/s10973-006-7873-y ↗
16. Surface characterization of photodegraded poly(ethylene terephthalate). The effect of ultraviolet absorbers10.1016/j.polymer.2004.02.003 ↗
17. Structural changes during photodegradation of poly(ethylene terephthalate)10.1023/A:1021067027612 ↗
18. Photodegradation of bisphenol A polycarbonate10.1016/j.polymdegradstab.2006.12.003 ↗
19. Recycling of poly(ethylene terephthatlate)/polycarbonate blends10.1016/j.polymdegradstab.2005.02.019 ↗