journal article·2013-05-28Open access

Microstructure and tribological properties of cobalt-based Stellite 6 alloy coating by electro-spark deposition

QiFeng Jing, YeFa Tan

Materials Research· Volume 16· Issue 5

Abstract

The cobalt-based Stellite 6 coating with a thickness of 0.5 mm was deposited onto 45 carbon steel by electro-spark deposition technology. Microstructure, chemical composition, phase composition, microhardness distribution and wear resistance of the coating were researched by a series of experiments. The results indicate that, the coating with refined and compact microstructure is mainly composed of Co, Cr7C3, Co6W6C and CrCo. The coating makes metallurgical bonding interface with the substrate. Microhardness of the coating is improved significantly with an average value of 827.9 HV0.5, which is about 3.6 times that of the substrate. Under the same experimental condition, mass loss of the substrate is about 4.2-4.5 times that of the coating, so the coating shows excellent wear resistance. Main wear mechanism of the coating is abrasive wear at low speed or low load stage, and fatigue wear at high speed or heavy load condition.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

PLA University of Science, China

References (16)

Show source-provided references
1. The properties and applications of Stellite alloys
2. Inconel 617 and Stellite 6 alloys for tooling in thixoforming of steels10.1016/S1003-6326(09)60354-X ↗
3. Microstructure and wear resistance of electro-thermal explosion sprayed stellite coating used for remanufacturing10.1007/s11771-005-0042-9 ↗
4. Plasma cladding of Stellite 6 powder on Ni76Cr19AlTi exhausting valve10.1016/S1003-6326(07)60044-2 ↗
5. Microstructures comparison of Stellite 6 alloy by self-propagating high-temperature synthesis and cast HS111 alloy10.1016/S1875-5372(10)60070-7 ↗
6. Sheldon GL · 1985 · 388
7. Effect of electrospark alloying process on microstructure and properties of the coating
8. The formation of a single-pulse electrospark deposition spot10.1016/j.surfcoat.2004.07.104 ↗
9. Preparation and mechanical properties of two nickel base alloy coatings achieved by electrospark deposition
10. Surface hardening of metallic alloys by electrospark deposition followed by plasma nitriding10.1016/j.jmatprotec.2006.03.162 ↗
11. Dolinsek S · 2003 · 1103
12. Electrospark deposition for die repair
13. Application of electro-spark deposition as a joining technology
14. Microstructure and properties of the YG8 ESD coating on a cast steel roll
15. Electro-spark strengthened titanium alloy surfaces by using silicon electrode and their wear resistance properties
16. Materials transfer in electro-spark deposition of TiCp/Ni metal-matrix composite coating on Cu substrate