Artificial Neural Network for Predicting Hardness of Multistage Solutionized and Artificially Aged LM4 + TiB2 Composites
Source abstract
Abstract
Aluminium casting alloy LM4 (EN 1706 AC-45200) composites with TiB2 (1, 2, and 3 wt.%) as reinforcements were produced using the two-stage stir casting method. OM and SEM study shows uniform and homogeneous reinforcement distribution in LM4 + TiB2 composites. As-cast composites were subjected to single-stage solution treatment at 520°C for 2 h and multistage solution treatment at 495 and 520°C for 2 and 4 h, followed by hot water quenching at 60°C and aging at 100 and 200°C for different time intervals. The hardness of as-cast and artificially aged composites were compared in both conditions. Compared to as-cast LM4 alloy, 20-45% improvement in hardness was observed for LM4 + TiB2 as-cast composites. 60-150% improvement in hardness was observed in artificially aged LM4 + 3 wt.% TiB2 composites when aged at 100 and 200°C during peak aged conditions. TEM images confirmed the presence of primary strengthening solute-rich phases after age hardening treatment such as θ’-Al2Cu and θ”-Al3Cu, which are responsible for hardness increment. An artificial neural network (ANN) model was created to predict the hardness trend of these composite samples using MATLAB R2021b, and results proved that the ANN model developed can be utilized as an effective tool to predict the hardness of treated composite samples.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Manipal Academy of Higher Education, India
References (37)
Show source-provided references
1. Application of computational thermodynamics to the determination of thermophysical properties as a function of temperature for multicomponent Al-based alloys10.1016/j.tca.2015.09.013 ↗
2. Dry sliding wear behaviour of thixoformed Al-5.7Si–2Cu-0.3 Mg alloys at high temperatures using taguchi method10.1016/j.wear.2019.203134 ↗
3. Effect of homogenization temperature on mechanical and tribological properties of LM4 cast alloy10.1016/j.matpr.2020.08.202 ↗
4. Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles
5. Dry reciprocating wear of Al-Si-SiCp composites: a statistical analysis10.1016/j.triboint.2010.02.014 ↗
6. Optimization of dry sliding wear behavior of aluminum LM4-Ta/NbC nano composite using Taguchi technique10.1016/j.matpr.2019.09.043 ↗
7. Mechanical properties of 1.5wt.% TiB2-added hypoeutectic Al-Mg- Si alloys processed by equal channel angular pressing10.1016/j.proche.2016.03.122 ↗
8. Design of experiments analysis of wear behavior of stir cast Al-TiB2 composite in lubricated condition10.1016/j.matpr.2017.12.104 ↗
9. Design of experiments analysis of abrasive friction behavior of Al-TiB2 composites10.1016/j.matpr.2019.06.705 ↗
10. Improvement in as-cast strength of high pressure die-cast Al–Si–Cu–Mg alloys by synergistic effect of Q-Al5Cu2Mg8Si6 and θ-Al2Cu phases
11. Effect of nickel addition and solution treatment time on microstructure and hardness of Al-Si-Cu aged alloys10.1016/j.matchar.2016.08.020 ↗
12. HRTEM and HAADF-STEM of precipitates at peak ageing of cast A319 aluminium alloy10.1016/j.micron.2012.10.009 ↗
13. Evolution of microstructure in Al-Si-Cu system modified with a transition element addition and its effect on hardness10.1590/1980-5373-mr-2015-0673 ↗
14. Determination of the activation energy in a cast aluminium alloy by TEM and DSC10.1016/j.jallcom.2006.05.132 ↗
15. The effect of Mg on the structure and properties of Type 319 aluminum casting alloys10.1016/j.actamat.2008.11.021 ↗
16. Effect of Mg level on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys10.1016/j.msea.2015.07.008 ↗
17. Fabrication and evaluation of tribological behaviour and hardness of aluminium-LM4 reinforced with nano alumina and micro Mo10.1016/j.matpr.2020.06.036 ↗
18. Effect of high magnesium content on microstructure of Al-7Si alloy10.1016/j.matlet.2013.12.012 ↗
19. Influence of process-induced microstructure on hardness of two Al-Si alloys10.1016/j.msea.2015.08.051 ↗
20. Effect of mechanical properties on multi axially forged LM4 aluminium alloy10.1016/j.matpr.2020.04.465 ↗
21. Phase formation in as-solidified and heat-treated Al-Si-Cu-Mg-Ni alloys: thermodynamic assessment and experimental investigation for alloy design10.1016/j.jallcom.2012.10.182 ↗
22. Sadati H · 2011
23. Multi-objective optimization and modeling of age hardening process using ANN, ANFIS and genetic algorithm: results from aluminum alloy A356/cow horn particulate composite10.1016/j.jmrt.2019.01.031 ↗
24. Using artificial neural networks (ANN) for modeling predicting hardness change of wood during heat treatment
25. Artificial neural network application to study quantitative relationship between silicide and fracture toughness of Nb-Si alloys10.1016/j.matdes.2017.05.027 ↗
26. Artificial neural network (ANN) modeling for predicting hardness of Ni-Cbn composite coatings
27. An artificial neural network for predicting corrosion rate and hardness of magnesium alloys10.1016/j.matdes.2015.11.040 ↗
28. Artificial neural network prediction of Cu-Al2O3 composite properties prepared by powder metallurgy method10.1016/j.jmrt.2013.08.001 ↗
29. Developing a model for hardness prediction in water-quenched and tempered AISI 1045 steel through an artificial neural network10.1016/j.matdes.2013.04.038 ↗
30. Artificial neural network (ANN) approach to hardness prediction of aged aluminium 2024 and 6063 Alloys10.3139/120.110290 ↗
31. Improvement of 319 aluminum alloy casting durability by high temperature solution treatment10.1016/S0924-0136(00)00793-7 ↗
32. Thermo-hydraulic performance prediction of a solar air heater with circular perforated absorber plate using Artificial neural network
33. Ghritlahre HK · 2019
34. Experimental validity on the casting characteristics of stir cast aluminium composites10.1016/j.jmrt.2020.01.028 ↗
35. Tribolayer behaviour and wear of artificially aged AI6061 hybrid composites10.15282/ijame.18.2.2021.04.0660 ↗
36. Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites10.1016/j.jmrt.2020.01.098 ↗
37. Askeland DR · 2010