journal article·2019Open access

Lower Susceptibility of Laser-irradiated Ti-15Mo Surface to Methicillin-resistant Staphylococcus aureus Cells Adhesion

Fernando Pozzi Semeghini Guastaldi, Camila Cristina de Foggi, Luis Carlos Leal Santana, Luis Geraldo Vaz, Carlos Eduardo Vergani, Antonio Carlos Guastaldi

Materials Research· Volume 22· Issue 4

Abstract

Extensive data reported the influence of the physicochemical properties on the bacterial adhesion in biomaterials, of which surface roughness of titanium (Ti) can dictates methicillin-resistant Staphylococcus aureus (MRSA) adhesion to orthopedic implants. Herein, we investigated the influence of the Yb:YAG laser texturing of titanium-15molybdenum (TiMo-L) surface on the MRSA (ATCC #33591) cells adhesion and viability. The physicochemical properties and antibacterial performance of TiMo-L were compared to samples of laser-irradiated pure titanium (Ti-L). Polished samples (Ti-P and TiMo-P) were used as controls. Laser textured surfaces presented a high degree of hydrophilicity, an irregular-shaped cavity and a typical microstructured pattern, compared to the polished substrates. The laser irradiation reduced the peaks of molybdenum (Mo) in the surface of Ti-15Mo alloy, which is explained, at least in part, by the difference between the melting point of Ti (1.668 ºC) and Mo (2.623 ºC). Laser texturing raised the MRSA cells viability and statistically increased the bacterial adhesion to pure Ti (P < 0.01; Wilcoxon-Signed rank test) and Ti-15Mo alloy (P < 0.001; Paired t test). The TiMo-L surface was significantly less susceptible to MRSA cell adhesion compared to Ti-L substrate (P < 0.001; Paired t test).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Estadual Paulista, Brazil

References (55)

Show source-provided references
1. Video-assisted thoracic surgery rib resection and reconstruction with titanium plate10.1016/j.athoracsur.2011.03.019 ↗
2. 10-year survival rate and the incidence of peri-implant disease of 374 titanium dental implants with a SLA surface: a prospective cohort study in 177 fully and partially edentulous patients10.1111/clr.12499 ↗
3. Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical applications10.1016/j.actbio.2008.07.010 ↗
4. Investigations into Ti-(Nb,Ta)-Fe alloys for biomedical applications10.1016/j.actbio.2015.12.010 ↗
5. Bone formation at the surface of low modulus Ti-7: 5Mo implants in rabbit femur10.1016/j.biomaterials.2007.02.005 ↗
6. The bone tissue compatibility of a new Ti-Nb-Sn alloy with a low Young's modulus10.1016/j.actbio.2011.02.008 ↗
7. Biomedical Ti-Mo Alloys with Surface Machined and Modified by Laser Beam: Biomechanical, Histological, and Histometric Analysis in Rabbits10.1111/j.1708-8208.2011.00354.x ↗
8. Probability of survival of implant-supported metal ceramic and CAD/CAM resin nanoceramic crowns10.1016/j.dental.2015.05.006 ↗
9. Effect of implant-abutment connection design on reliability of crowns: regular vs. horizontal mismatched platform10.1111/j.1600-0501.2011.02257.x ↗
10. Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material10.1016/j.jmbbm.2016.05.008 ↗
11. Development of Ti-15Zr-Mo alloys for applying as implantable biomedical devices10.1016/j.jallcom.2018.03.308 ↗
12. Titanium alloy femoral neck fracture--clinical and metallurgical analysis in 6 cases
13. Customized reconstruction of an extensive mandibular defect: A clinical report10.1016/j.prosdent.2016.04.012 ↗
14. Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report10.1016/j.joms.2016.03.046 ↗
15. Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants10.1016/j.dental.2014.10.002 ↗
16. Evaluation of metal ion release from Ti6Al4V and Co-Cr-Mo casting alloys: in vivo and in vitro study10.1111/jopr.12067 ↗
17. Prolonged exposure to low levels of aluminum leads to changes associated with brain aging and neurodegeneration10.1016/j.tox.2013.10.008 ↗
18. Toxicity of vanadium on isolated rat liver mitochondria: a new mechanistic approach10.1039/c2mt20198d ↗
19. Surface treatments of titanium dental implants for rapid osseointegration10.1016/j.dental.2006.06.025 ↗
20. Histomorphometric analysis of the osseointegration of four different implant surfaces in the femoral epiphyses of rabbits10.1111/j.1600-0501.2008.01547.x ↗
21. Implant surface characteristics and their effect on osseointegration10.1038/sj.bdj.2015.171 ↗
22. Development of Ti-Mo alloys for biomedical applications: Microstructure and electrochemical characterization10.1016/j.msea.2006.11.061 ↗
23. Characterization and formation of hydroxyapatite on Ti6Al4V coated by plasma electrolytic oxidation10.1016/j.jallcom.2012.11.024 ↗
24. On the electropolishing and anodic oxidation of Ti-15Mo alloy10.1016/j.electacta.2016.01.218 ↗
25. Femtosecond laser-induced micropattern and Ca/P deposition on Ti implant surface and its acceleration on early osseointegration10.1021/am402290e ↗
26. Commercially pure titanium implants with surfaces modified by laser beam with and without chemical deposition of apatite: Biomechanical and topographical analysis in rabbits10.1111/j.1600-0501.2012.02471.x ↗
27. Biological performance of chemical hydroxyapatite coating associated with implant surface modification by laser beam: biomechanical study in rabbit tibias10.1016/j.joms.2009.03.046 ↗
28. Temporal sequence of hard and soft tissue healing around titanium dental implants10.1111/prd.12054 ↗
29. Surface alterations of zirconia and titanium substrates after Er,Cr: YSGG irradiation10.1007/s10103-013-1516-x ↗
30. In vitro and in vivo comparative colonization of Staphylococcus aureus and Staphylococcus epidermidis on orthopaedic implant materials10.1016/0142-9612(89)90073-2 ↗
31. Biofilm formation in Staphylococcus implant infections: A review of molecular mechanisms and implications for biofilm-resistant materials10.1016/j.biomaterials.2012.05.031 ↗
32. A review of the biomaterials technologies for infection-resistant surfaces10.1016/j.biomaterials.2013.07.089 ↗
33. Screening for nasal carriage of Staphylococcus aureus among patients scheduled to undergo orthopedic surgery: Incidence of surgical site infection by nasal carriage10.1016/j.jos.2017.03.005 ↗
34. Infection as a cause of primary total hip arthroplasty revision and its predictive factors
35. Effect of surface roughness on the hydrophobicity of a denture-base acrylic resin and Candida albicans colonization10.1111/jicd.12125 ↗
36. Basis of bone metabolism around dental implants during osseointegration and peri-implant bone loss10.1002/jbm.a.36060 ↗
37. Impact of Dental Implant Surface Modifications on Osseointegration10.1155/2016/6285620 ↗
38. In vivo evaluation of cp Ti implants with modified surfaces by laser beam with and without hydroxyapatite chemical deposition and without and with thermal treatment: topographic characterization and histomorphometric analysis in rabbits10.1007/s00784-016-1936-7 ↗
39. Surface and biomechanical study of titanium implants modified by laser with and without hydroxyapatite coating, in rabbits10.1563/AAID-JOI-D-10-00030 ↗
40. The early osseointegration of the laser-treated and acid-etched dental implants surface: an experimental study in rabbits. Journal of Materials Science10.1007/s10856-009-3730-4 ↗
41. Surface modification of Ti dental implants by Nd: YVO4 laser irradiation10.1016/j.apsusc.2007.05.048 ↗
42. Apatite coatings onto titanium surfaces submitted to laser ablation with different energy densities10.1016/j.surfcoat.2009.07.013 ↗
43. Bioactive coating on titanium implants modified by Nd: YVO4 laser10.1016/j.apsusc.2010.12.056 ↗
44. Laser-modified titanium implants for improved cell adhesion10.1007/s10103-007-0460-z ↗
45. Attachment and proliferation of human osteoblast-like cells (MG-63) on laser-ablated titanium implant material10.1016/j.msec.2013.06.020 ↗
46. A review on the wettability of dental implant surfaces II: Biological and clinical aspects10.1016/j.actbio.2014.03.032 ↗
47. Potential of chemically modified hydrophilic surface characteristics to support tissue integration of titanium dental implants10.1002/jbm.b.31233 ↗
48. Nanostructures and hydrophilicity influence osseointegration: a biomechanical study in the rabbit tibia10.1111/clr.12213 ↗
49. Two-Stage Cementless Revision Total Hip Arthroplasty for Infected Primary Hip Arthroplasties10.1016/j.arth.2015.03.040 ↗
50. Direct demonstration of viable Staphylococcus aureus biofilms in an infected total joint arthroplasty: A case report. The Journal of Bone and Joint Surgery
51. Bacterial adhesion to orthopaedic implant materials and a novel oxygen plasma modified PEEK surface10.1016/j.colsurfb.2013.09.012 ↗
52. Differential response of Staphylococci and osteoblasts to varying titanium surface roughness10.1016/j.biomaterials.2010.10.001 ↗
53. Bacterial adhesion to direct laser metal formed and mildly acid etched implant surfaces10.1016/j.surfcoat.2017.09.011 ↗
54. Ti based biomaterials, the ultimate choice for orthopaedic implants - A review10.1016/j.pmatsci.2008.06.004 ↗
55. Methicillin-Resistant Staphylococcus aureus Biofilms and Their Influence on Bacterial Adhesion and Cohesion10.1155/2016/4708425 ↗