Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Source abstract
Abstract
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can generate detrimental factors in its performance, among them, the residual stresses. In this work, the residual stresses generated by the autogenous GTAW process, due to different interpass temperatures on the weld bead geometry, were analyzed by the Hole-Drilling technique in dissimilar welding joints of stainless steel AISI 316L and Inconel 718 alloy. In addition, the Vickers microhardness measurements were carried out to evaluate the hardness profile in the cross section of the weld bead covering base metal (BM), heat affect zone (HAZ) and weld metal (WM). We found that in the interface region between BM and HAZ of each dissimilar joint metal, residual stresses increased above 300 MPa, while hardness increased above 160 HV.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal Fluminense, Brazil
Centro Universitário de Volta Redonda, Brazil
References (14)
Show source-provided references
1. Microstructural Characterization of the Dissimilar Welding - Austenitic Stainless Steel AISI 304 with Nickel Filler Metal Inconel 625
2. Measurement of mechanical properties in a 316L stainless steel welded joints10.1016/j.ijpvp.2008.11.002 ↗
3. Some features of anisothermal solid-state transformations in alloy 71810.1016/j.matchar.2010.02.011 ↗
4. Thermal cycling of transition joints between modified 9Cr - 1Mo steel and alloy 800 for steam generator application10.1016/S0308-0161(02)00104-7 ↗
5. Hosford WF · 2005
6. Oliveira EM · 2011
7. Methods of Measuring Residual Stresses in Components10.1016/j.matdes.2011.08.022 ↗
8. 2009
9. Demarque R · 2018
10. Avaliação microestrutural e resistência à corrosão de uma junta dissimilar entre um aço de alta resistência e baixa liga e aço um inoxidável duplex10.1590/0104-9224/si24.04 ↗
11. Sousa DA · 2012
12. Lu J · 1996
13. Influence of lubrication modes on residual stresses generation in drilling of 316L, 15-5PH and Inconel 718 alloys10.1016/j.procir.2018.05.020 ↗
14. Peres RA · 2014