journal article·2015-11-03Open access

First Results of Cavitation Erosion Behavior of Plasma Nitrided Niobium: Surface Modification

Ricardo Kertscher, Juliana Martins de Moraes, Sérgio Henke, Angela Nardelli Allenstein, Regis Henrique Gonçalves e Silva, Jair Carlos Dutra, Silvio Francisco Brunatto

Materials Research· Volume 18· Issue 6

Abstract

This work presents the first results of the plasma nitriding study performed in pure niobium in order to increase its cavitation erosion resistance. Samples were prepared from 98.9% purity and 90% reduction cold-rolled niobium bars. Annealing treatment of the cold-worked niobium samples was carried out in vacuum furnace at 1.33 Pa pressure, in the temperature of 1000 °C, for a time of 60 min. Annealed samples showing hardness of 80 HV were cut to dimensions of 20 × 30 × 4 mm3. Nitriding treatment was conducted at 1080 °C, gas mixture of 90% N2 + 10% H2, flow rate of 5 × 10–6 Nm3s–1, and pressure of 1200 Pa (9 Torr), for a total time of 4 h comprised by two treatment steps of 2 h each. For comparison purpose, results for nitrided and non-nitrided niobium are confronted. Samples were characterized by XRD, nanoindentation, microhardness, SEM, and 2D surface topography and 3D interferometry profile analysis techniques. Cavitation testing was conducted according to ASTM G32-09. Comparatively, promising results based on the formation of niobium nitride phases in treated surfaces are presented and discussed in the present work.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Paraná, Brasil

SpectroScan Tecnologia de Materiais Ltda, Brasil

Universidade Federal de Santa Catarina, Brasil

References (19)

Show source-provided references
1. Stachowiak GW · 2006
2. Cavitation erosion behavior of niobium10.1016/j.wear.2011.09.001 ↗
3. Surface modification of pure niobium by plasma nitriding10.1016/j.surfcoat.2013.03.008 ↗
4. Improvement of the cavitation erosion resistance of an austenitic AISI 304L stainless steel by high temperature gas nitriding10.1016/j.msea.2004.05.003 ↗
5. Improvement of the cavitation erosion resistance for low-temperature plasma nitrided CA-6NM martensitic stainless steel10.1016/j.wear.2013.11.002 ↗
6. Cavitation Erosion of Structural Ceramics10.1016/0272-8842(94)90040-X ↗
7. Cavitation erosion behavior of ceramics in aqueous solutions10.1016/j.wear.2006.12.040 ↗
8. Pseudoplastic deformation pits on polished ceramics due to cavitation erosion10.1016/j.ceramint.2011.03.043 ↗
9. Cavitation wear of structural oxide ceramics and selected composite materials10.1016/j.jeurceramsoc.2014.04.022 ↗
10. Cavitation erosion in silicon nitride: Experimental investigations on the mechanism of material degradation10.1016/j.triboint.2010.06.012 ↗
11. Cavitation and rolling wear in silicon nitride10.1016/j.ceramint.2010.02.011 ↗
12. The new parameter to assess cavitation erosion resistance of hard PVD coatings10.1016/j.engfailanal.2010.10.002 ↗
13. Influence of the substrate hardness on the cavitation erosion resistance of TiN coating10.1016/j.wear.2007.02.003 ↗
14. Chapman B · 1980
15. Nanomechanical properties of rough surfaces10.1590/S1516-14392006000200009 ↗
16. AISI 304 nitrocarburized at low temperature: Mechanical and tribological properties10.1016/j.surfcoat.2009.12.030 ↗
17. Magnetron sputtered NbN thin films and mechanical properties10.1016/S0257-8972(03)00848-X ↗
18. 1990
19. Wilkinson WD · 1970