The effect of voltage on the arc stud welding of microwave sintered Fe+Al powder mixture
Source abstract
Abstract
The joining of powder metallurgy products is of importance because of high demand in many industrial applications. In this study, the effect of welding voltage on the joint quality has been investigated using discharge arc stud welding, a low heat input welding method, without gas protection to join steel stubs to microwave sintered compacts containing a powder mixture of 26 atomic % Al and Fe (balance). It has been shown that welds with steel stubs are prone to side cracking in the weld zone and they also suffer from the oxidation of metal powders adjacent to weld zone. The forms of oxides are continuous and laminar type in welds with steel stubs and the composition of weld zone changes with increasing arc voltage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
A. Kocatepe University, Turkey
Gazi University, Turkey
References (18)
Show source-provided references
1. Effect of porosity content on the weldability of powder metal parts produced by friction stir welding10.4028/www.scientific.net/MSF.534-536.789 ↗
2. Joining of microwave sintered Fe-26Al, Fe-30Al, Fe-26Al-14Ti and Fe-30Al-14Ti powder mixtures by diffusion bonding using Cu interlayer
3. Investigation of weldability of P/M bronze materials by TIG welding technique10.4028/www.scientific.net/AMR.23.315 ↗
4. Joining processes for powder metallurgy parts: a review10.1179/003258910X12680617015249 ↗
5. Sinter-joining of different metal powder compacts using resistance heating10.1016/S0924-0136(03)00361-3 ↗
6. Weldability of Al4C3-Al composites via diffusion welding technique10.1016/j.matdes.2004.07.017 ↗
7. Investigations on the continuous drive friction welding of sintered powder metallurgical (P/M) steel and wrought copper parts10.1016/j.msea.2006.11.026 ↗
8. Alumina-copper joining by the sintered metal powder process10.1016/j.ceramint.2009.10.016 ↗
9. A fundamental study of laser welding of hot extruded powder metallurgy (P/M) AZ31B magnesium alloy10.1016/j.msea.2011.09.010 ↗
10. Weld techniques give powder metal a different dimension10.1016/S0026-0657(07)70106-6 ↗
11. Agrawal D · 2006 · 183
12. Aastrup P · 1966
13. Welding of 316L P/M stainless steel
14. Joining of iron based powder metallurgy parts with sintering
15. Application of flash welding to a titanium aluminide alloy-microstructural evaluations10.1115/1.2906674 ↗
16. Messler RW · 2004
17. Effect of welding parameters on the weldability of material
18. The effects of metal vapour in arc welding