Microstructural Characterization of a 1200 MPa Complex-Phase Steel
Source abstract
Abstract
The demand for new advanced high strength steels (AHSS) has been increasing in the last few decades. A large part of this demand comes from automotive companies. We have produced a new complex-phase (CP) steel with 1200 MPa of mechanical resistance and 8% of elongation, called CP1200. In this paper the dilatometric and microstructural characterization of a newly produced CP1200 steel is presented. The new steel was produced by making changes to the heat treatment of the already industrially available CP1100. The microstructure was quantified using light optical microscopy (LOM) and electron backscatter diffraction (EBSD). The microstructure of both steels was compared to identify the origin of the mechanical properties improvement. A new microstructure distribution, with higher amount of bainite and smaller concentration of ferrite and martensite was identified.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Pontifícia Universidade Católica do Rio de Janeiro, Brasil
Pontifícia Universidade Católica do Rio de Janeiro, Brasil; University of Manchester, United Kingdom
Instituto Militar de Engenharia, Brasil
Colorado School of Mines, USA; Colorado School of Mines, USA
Colorado School of Mines, USA; Colorado School of Mines, USA; Colorado School of Mines, USA
References (34)
Show source-provided references
1. High strength steels for automotive safety parts
2. Mesplont C · 2002
3. Gutierrez I · 2010
4. Mallick PK · 2012 · 510.1533/9780857095466.5 ↗
5. Hilditch TB · 2015 · 9
6. Hall JN · 2017 · 1910.1016/B978-0-08-100638-2.00002-X ↗
7. Damage evolution in complex-phase and dual-phase steels during edge stretching10.3390/ma10040346 ↗
8. Damage mechanisms in multiphased steels with a bainitic matrix under various mechanical loading paths10.1016/j.promfg.2018.07.317 ↗
9. Horvath CD · 2021 · 39
10. Influence of thermomechanical sequences on the mechanical properties of dp 800 steel
11. Phase transformation theory: a powerful tool for the design of advanced steels10.1007/s11837-008-0159-z ↗
12. Modified heat treatment for lower temperature improvement of the mechanical properties of two ultrahigh strength low alloy steels10.1007/BF02656715 ↗
13. Effects of heat treatment on microstructure and mechanical properties of bainitic single- and complex-phase steel
14. Microstructural characterization of A 1100 MPa complex-phase steel
15. Etching techniques for the microstructural characterization of complex phase steels by light microscopy
16. Use of LOM and EBSD to identify bainite in complex phase steel10.1017/S1431927621001859 ↗
17. Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements10.1016/j.matchar.2018.05.038 ↗
18. A correlative approach for identifying complex phases by electron backscatter diffraction and transmission electron microscopy10.9729/AM.2017.47.1.43 ↗
19. A phase quantification method based on EBSD data for a continuously cooled microalloyed steel10.1016/j.matchar.2016.11.024 ↗
20. Bleck W · 2009 · 145
21. Phase analysis of steels by grain-averaged EBSD functions10.2355/isijinternational.51.130 ↗
22. Oxford I · 2020
23. Characterization of dual-phase steel microstructure by combined submicrometer EBSD and EPMA carbon measurements10.1017/S1431927613001554 ↗
24. Microstructural evolution of a low-carbon steel during application of quenching and partitioning heat treatments after partial austenitization10.1007/s11661-008-9701-4 ↗
25. Trainable weka segmentation: a machine learning tool for microscopy pixel classification10.1093/bioinformatics/btx180 ↗
26. New method of characterizing and quantifying complex microstructures in steels10.1080/10426910903143415 ↗
27. Influence of surface preparation method on retained austenite quantification
28. 2016
29. 2022
30. 2022
31. 2003
32. 2017
33. Hole expansion of dual-phase and complex-phase AHS steels - effect of edge conditions
34. Orientation relationship between austenite and bainite in a multiphased steel10.1016/j.matchar.2006.05.016 ↗