journal article·2019Open access

Ballistic Tests of Alumina-UHMWPE Composites Submitted to Gamma Radiation

André Ben-Hur da Silva Figueiredo, Hélio de Carvalho Vital, Ricardo Pondé Weber, Édio Pereira Lima Júnior, João Gabriel Passos Rodrigues, Letícia dos Santos Aguilera, Ronaldo Sergio de Biasi

Materials Research· Volume 22· Issue suppl 1

Abstract

The energy absorption in ballistic tests of alumina-ultra high molecular weight polyethylene (UHMWPE) composites with 60, 80 and 90 wt% alumina submitted to gamma radiation doses of 25, 50 and 75 kGy was investigated. The ballistic tests were carried out at subsonic speed using a compressed air system. The results showed that the composite with 80% alumina irradiated with 50 kGy yields the best ballistic results. Gel content, Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results showed that this composite is the one with the highest concentration of crosslinks and the lowest volume fraction of amorphous UHMWPE. Scanning electron microscopy (SEM) images of the same composite showed a high pullout, suggesting that gamma irradiation increases the adhesion between alumina and UHMWPE.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer crystallization and properties · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Militar de Engenharia, Brasil

Centro Tecnológico do Exército, Brasil

References (19)

Show source-provided references
1. Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric10.1590/1516-1439.358914 ↗
2. Cavallaro PV · 2011
3. Carlucci DE · 2008
4. Response to Ballistic Impact of Alumina-UHMWPE Composites
5. An experimental study of penetration resistance of ceramic armour subjected to projectile impact10.1016/j.ijimpeng.2005.03.004 ↗
6. Efeito da irradiação gama nas propriedades mecânicas e térmicas de redes DGEBA/amina cicloalifática com potencial para aplicações médicas10.4322/polimeros.2014.006 ↗
7. Lima IS · 1997 · 137
8. On the structural and physicochemical properties of gamma irradiated UHMWPE/silane hybrid10.1016/j.matchemphys.2013.09.023 ↗
9. Radiation effects in ceramics10.1016/0022-3115(94)90017-5 ↗
10. Polietileno: Principais Tipos, Propriedades e Aplicações10.1590/S0104-14282003000100005 ↗
11. Fractographic analysis of composites based on ultra high molecular weight polyethylene10.1016/j.compositesb.2013.08.083 ↗
12. Ballistic performance of armor ceramics: Influence of design and structure. Part I10.1016/j.ceramint.2010.05.021 ↗
13. Ballistic performance of armor ceramics: Influence of design and structure. Part II10.1016/j.ceramint.2010.05.022 ↗
14. Lightweight ceramic composite armor system10.1179/174367606X113537 ↗
15. Spiegelberg SH · 2009 · 355
16. Azevedo G · 2010
17. Impact failure mechanisms in alumina tiles on finite thickness support and the effect of confinement10.1016/S0734-743X(99)00147-5 ↗
18. Moldagem por compressão a frio do polietileno de ultra alto peso molecular. Parte 1: Influência do tamanho, distribuição e morfologia da partícula na densidade a verde10.1590/S0104-14282009000300011 ↗
19. An analytical model for ballistic impacts against ceramic tiles10.1016/j.ceramint.2018.08.172 ↗