journal article·2017-04-03Open access

Simulation of CP-Ti Recrystallization and Grain Growth by a Cellular Automata Algorithm: Simulated Versus Experimental Results

Rodrigo José Contieri, Marcelo Zanotello, Rubens Caram

Materials Research· Volume 20· Issue 3

Abstract

The application of cellular automata in materials science requires the conversion of the automata's rules and abstract general properties to rules and properties associated with the material and phenomena under study. In this paper we propose a model which uses cellular automata to simulate recrystallization and grain growth during isothermal and non-isothermal treatments of cold worked polycrystalline materials. The algorithm's spatial and temporal scaling is based on known experimental results for recrystallization and grain growth in highly cold-worked commercially pure titanium grade 2. In the recrystallization, the best agreement between experimental and computational results in terms of the process kinetics and the average diameter of recrystallized grains is obtained from a nucleation model that considers the temperature-dependent nuclei formation rate. In the simulation of grain growth after primary recrystallization, the results indicate the normal growth of an equiaxed grain structure whose kinetics and dimensions are comparable to those observed experimentally.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Campinas, Brazil

Federal University of ABC, Brazil

References (33)

Show source-provided references
1. Validation and predictions of coupled finite element and cellular automata model: Influence of the degree of deformation on static recrystallization kinetics case study10.1016/j.matchemphys.2016.05.040 ↗
2. Time and legth scale issues in numerical modelling of dynamic recrystallization based on the multi space cellular automata method10.1016/j.jocs.2016.05.007 ↗
3. Cellular automata as an alternative to (rather than an approximation of) differential equations in modeling physics10.1016/0167-2789(84)90254-9 ↗
4. Cellular Automata in Materials Science with Particular Reference to Recrystallization Simulation10.1146/annurev.matsci.32.090601.152855 ↗
5. Simulation of recrystallization by cellular automata10.1016/0956-7151(91)90183-2 ↗
6. Growth of nuclei in a cellular automaton simulation of recrystallization10.1016/S1359-6462(96)00331-4 ↗
7. Study of the influence of initial microstructure topology on the kinetics of static recrystallization using a cellular automata model10.1016/j.commatsci.2005.07.005 ↗
8. Modeling of recrystallization in cold rolled copper using inverse cellular automata and genetic algorithms10.1016/j.commatsci.2008.02.032 ↗
9. Inhomogeneous Poisson point process nucleation: comparison of analytical solution with cellular automata simulation10.1590/S1516-14392009000200017 ↗
10. Modeling Dynamic Recrystallization Using Cellular Automata10.1016/S1359-6462(97)00500-9 ↗
11. Cellular automata simulation of microstructural evolution during dynamic recrystallization of an HY-100 steel10.1016/j.msea.2003.09.025 ↗
12. Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization10.1016/S1359-6454(01)00233-6 ↗
13. Microstructural modeling of dynamic recrystallization using irregular cellular automata10.1016/j.commatsci.2008.04.027 ↗
14. Simulation of grain coarsening in two dimensions by cellular-automaton10.1016/S1359-6454(00)00352-9 ↗
15. Computer simulation of 2D grain growth using a cellular automata model based on the lowest energy principle10.1016/j.msea.2006.05.070 ↗
16. Cellular automata simulation of grain growth in three dimensions based on the lowest-energy principle10.1016/j.jcrysgro.2006.05.060 ↗
17. Modeling the grain growth kinetics by cellular automaton10.1016/j.msea.2006.09.023 ↗
18. Probabilistic modelling of microstructure formation in solidification processes10.1016/0956-7151(93)90065-Z ↗
19. Stochastic modelling of microstructure formation in solidification processes10.1088/0965-0393/5/4/008 ↗
20. Modeling of microstructure evolution in regular eutectic growth10.1103/PhysRevB.66.155428 ↗
21. Recrystallization and grain growth in highly cold worked CP-Titanium10.1016/j.msea.2010.03.023 ↗
22. Gottstein G · 2004
23. A physically based model for microstructure development in a macroscopic heat-affected zone: Grain growth and recrystallization10.1007/s11663-006-0050-7 ↗
24. A Read-shockley model for high-angle grain boundaries10.1016/0036-9748(89)90348-7 ↗
25. Monte Carlo modeling of microstructure evolution during the static recrystallization of cold-rolled, commercial-purity titanium10.1016/j.actamat.2006.03.055 ↗
26. Modeling the dynamic recrystallization under multi-stage hot deformation10.1016/j.actamat.2004.06.022 ↗
27. Padilha AF · 2005
28. Recrystallization of pure copper investigated by calorimetry and microhardness10.1016/j.matchar.2008.01.002 ↗
29. Modelling the dynamic recrystallization in C-Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata10.1016/j.commatsci.2014.02.017 ↗
30. Nucleation and growth during recrystallization10.1590/S1516-14392005000300002 ↗
31. Effect of cold work and non-isothermal anneling on the recrystallization behavior and texture evolution of a precipitation-hardenable aluminum alloy10.1016/j.scriptamat.2010.08.014 ↗
32. Random grid, three-dimensional, space-time coupled cellular automata for the simulation of recrystallization and grain growth10.1088/0965-0393/11/2/304 ↗
33. Computer simulation of grain growth-I. Kinetics10.1016/0001-6160(84)90151-2 ↗