Effect of Zr Content on the Distribution Characteristic of the 14H and 18R LPSO Phases
Source abstract
Abstract
Zirconium (Zr) is an essential element in Mg-Zn and Mg-Zn-Y system magnesium alloys. In this study, an interesting phenomenon that the content of Zr element could influence the size and the morphology of the long period stacking ordered (LPSO) phases, which has never been reported by previous works before. The Mg98.5-xZn0.5Y1Zrx (x =0, 0.1, 0.2 and 0.3 at. %) magnesium alloys were fabricated by directional solidification, and the effects of the Zr content on the distribution characteristics of the bulk LPSO phases (18R) and the lamellar LPSO phases (14H) were investigated. The directional solidification technology showed good controllability in LPSO phase’s distribution, and the morphology of LPSO phases in Mg98.5-xZn0.5Y1Zrx (x =0, 0.1, 0.2 and 0.3 at. %) alloys were observed clearly. The results showed that the amount and the morphology of the 14H and 18R LPSO phases within grains continuously decreased with the Zr content increasing. The continuous 14H lamellar structure changed to discontinuous. In addition, Zr element exhibited purification ability on the grain boundaries and refined effect on the 14H and 18R LPSO phases. This can be attributed to the influence of Zr atoms on stacking fault energy (SFE) and the attraction of Zr atoms to Mg atoms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Kunming University of Science and Technology, China
References (39)
Show source-provided references
1. Towards magnesium alloys for high-volume automotive applications10.1016/j.scriptamat.2016.07.035 ↗
2. Enhanced electromagnetic interference shielding in ZK60 magnesium alloy by aging precipitation10.1016/j.jpcs.2013.02.003 ↗
3. Research progress in magnesium alloys as functional materials10.1016/S1875-5372(17)30015-2 ↗
4. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
5. Insight of magnesium alloys and composites for orthopedic implant applications – a review10.1016/j.jma.2017.08.003 ↗
6. What is going on in magnesium alloys?
7. Exploring the possibility of protective surface oxides upon Mg alloy AZ31 via lutetium additions10.1016/j.corsci.2014.08.015 ↗
8. Dual-frequency ultrasonic treatment on microstructure and mechanical properties of ZK60 magnesium alloy10.1016/j.ultsonch.2017.07.027 ↗
9. Analysis of the hot deformation of ZK60 magnesium alloy10.1016/j.jma.2017.09.002 ↗
10. Analysis of flow stress and deformation mechanism under hot working of ZK60 magnesium alloy by a new strain-dependent constitutive equation10.1016/j.jpcs.2015.08.020 ↗
11. Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy10.1016/j.jmst.2017.04.004 ↗
12. Enhanced strength and plasticity of Mg-6Zn-0.5Zr alloy by low-temperature indirect extrusion10.1016/j.jallcom.2017.02.206 ↗
13. Self-organization of adiabatic shear bands in ZK60 Magnesium alloy10.1016/j.msea.2016.01.008 ↗
14. Evolution of precipitates in ZK60 magnesium alloy during high strain rate deformation10.1016/j.jallcom.2017.02.158 ↗
15. Effect of Zr on the microstructures and mechanical properties of as-extruded Mg-2.3Zn-0.18Y-xZr alloys10.1142/S0217979217440015 ↗
16. Effect of mole ratio of Y to Zn on phase constituent of Mg-Zn-Zr-Y alloys10.1016/S1003-6326(11)60783-8 ↗
17. d. Rafi ud, A.H. Qureshi, L. Wagner, The roles of Zn distribution and eutectic particles on microstructure development during extrusion and anisotropic mechanical properties in a Mg–Zn–Zr alloy10.1016/j.msea.2014.09.109 ↗
18. Microstructure development, mechanical properties and formability of Mg-Zn-Y-Zr magnesium alloy10.1016/j.msea.2012.06.025 ↗
19. Refinement of LPSO structure in Mg-Ni-Y alloys by ultrasonic treatment10.1016/j.ultsonch.2017.07.042 ↗
20. Enrichment of Gd and Al atoms in the quadruple close packed planes and their in-plane long-range ordering in the long period stacking-ordered phase in the Mg–Al–Gd system10.1016/j.actamat.2011.08.011 ↗
21. Coexistence of 14H and 18R-type long-period stacking ordered (LPSO) phases following a novel orientation relationship in a cast Mg−Al−RE−Zn alloy10.1016/j.jallcom.2018.07.053 ↗
22. The types and structures of the intermetallic phases in a cast Mg−4Al−15Gd−4Y−1Zn alloy10.1016/j.jallcom.2017.10.093 ↗
23. Strengthening mechanisms acting in extruded Mg-based long-period stacking ordered (LPSO)-phase alloys10.1016/j.actamat.2018.10.016 ↗
24. Effects of samarium content on microstructure and mechanical properties of Mg–0.5Zn–0.5Zr alloy10.1016/j.jmst.2019.01.019 ↗
25. The role of solute in grain refinement of magnesium10.1007/BF02830349 ↗
26. Grain refinement of magnesium alloys10.1007/s11661-005-0030-6 ↗
27. The interaction of grain refinement and ageing in magnesium–zinc–zirconium (ZK) alloys10.1016/j.actamat.2015.05.012 ↗
28. Solidification Behavior of Mg-Zn and Mg-Zn-Zr Alloys Using In-Situ Neutron Diffraction10.1007/s11665-015-1497-y ↗
29. Microstructure and thermal conductivity of Mg-2Zn-Zr alloy10.1016/j.jallcom.2017.06.148 ↗
30. The microstructure of Mg98.5Zn0.5Y1 Alloy with long-period stacking ordered structure10.2320/matertrans.M2016440 ↗
31. Research of impurity phase in single crystal pure magnesium prepared by directional solidification
32. The microstructure evolution with lamellar 14H-type LPSO structure in an Mg96.5Gd2.5Zn1 alloy during solid solution heat treatment at 773K
33. Luo S · 2011
34. Effect of Zn additions on the age-hardening of Mg–2.0Gd–1.2Y–0.2Zr alloys10.1016/j.actamat.2007.02.036 ↗
35. Precipitation behavior of 14H LPSO structure in single 18R phase Mg–Y–Zn alloy during annealing at 773 K10.1016/S1003-6326(17)60007-4 ↗
36. Influence of stacking fault energy on formation of long period stacking ordered structures in Mg–Zn–Y–Zr alloys, Prog. Nat
37. Formation of long-period stacking fault structures in magnesium alloys10.1016/j.commatsci.2016.07.035 ↗
38. Influence of solute and solute segregation on the stacking fault energy in HCP metals
39. Thermodynamic model for the influence of temperature on the stacking fault energy in HCP metals