journal article·2017-11-09Open access

Microstructure and Mechanical Properties of Ti-12Mo-8Nb Alloy Hot Swaged and Treated for Orthopedic Applications

Aline Raquel Vieira Nunes, Sinara Borborema Gabriel, Carlos Angelo Nunes, Leonardo Sales Araújo, Renato Baldan, Paulo Mei, Loïc Malet, Jean Dille, Luiz Henrique de Almeida

Materials Research· Volume 20· Issue suppl 2

Abstract

Metastable -type Ti alloys with non-toxic addition elements such as Mo, Zr, Sn, Ta and Nb were developed as an alternative to the widely used Ti-6Al-4V alloy for biomedical applications. These alloys possess enhanced biocompatibility and reduced elastic modulus in comparison with Ti-6Al-4V. Moreover, for orthopedic implants, low Young's modulus is required in order to avoid the stress shielding phenomenon. This study analyzes the microstructure and mechanical properties of a new Ti-12Mo-8Nb alloy after hot swaging, annealing at 950 C for 1h and water quenching. The alloy was characterized by X-ray diffraction, optical microscopy and transmission electron microscopy. Tensile tests were performed at room temperature. Young's modulus and hardness values were also measured. The structural characterization reveals a metastable structure containing only a small amount of and phases. Exhibiting a lower Young's modulus than Ti-6Al-4V and other previously studied Ti-Mo-Nb alloys, the Ti-12Mo-8Nb alloy can be a promising alternative for orthopedic application.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal do Rio de Janeiro, Brazil

Centro Universitário de Volta Redonda, Brazil

Universidade Estadual Paulista, Brazil

Universidade Estadual de Campinas, Brazil

Université Libre de Bruxelles, Belgium

References (35)

Show source-provided references
1. Titanium alloys in total joint replacement-a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
2. Ti based biomaterials, the ultimate choice for orthopaedic implants - A review10.1016/j.pmatsci.2008.06.004 ↗
3. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
4. Titanium alloys for biomedical applications10.1016/j.msec.2005.08.032 ↗
5. New developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
6. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
7. Beta Titanium Alloys: The Lowest Elastic Modulus for Biomedical Applications: A Review
8. Biocompatibility of beta-stabilizing elements of titanium alloys10.1016/j.biomaterials.2004.01.021 ↗
9. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
10. Deformation behavior of metastable β-type Ti-25Nb-2Mo-4Sn alloy for biomedical applications10.1016/j.jmbbm.2014.06.006 ↗
11. Microstructures and mechanical properties of Ti-50mass% Ta alloy for biomedical applications10.1016/j.jallcom.2007.11.090 ↗
12. Mechanical and electrochemical characterisation of new Ti-Mo-Nb-Zr alloys for biomedical applications10.1016/j.jmbbm.2015.12.023 ↗
13. Mechanical properties and microstructures of β Ti-25Nb-11Sn ternary alloy for biomedical applications10.1016/j.msec.2012.12.072 ↗
14. Metastable Titanium Alloys for Orthopedic Applications10.1002/adem.200500060 ↗
15. Aging response of the Ni-35Nb-7Zr-5Ta and Ti-35Nb-7Ta alloys10.1016/j.jallcom.2006.06.094 ↗
16. Effect of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti-Nb-Sn alloys10.1016/j.matchar.2014.08.014 ↗
17. Microstructure, mechanical properties and dry wear resistance of β-type Ti-15Mo-xNb alloys for biomedical applications10.1016/S1003-6326(13)62518-2 ↗
18. The microstructure and properties of Ti-Mo-Nb alloys for biomedical application10.1016/j.jallcom.2006.11.144 ↗
19. Metastable beta Ti-Nb-Mo alloys with improved corrosion resistance in saline solution10.1016/j.electacta.2014.06.021 ↗
20. In vitro performance assessment of new beta Ti-Mo-Nb alloy compositions10.1016/j.msec.2014.11.023 ↗
21. Maximisation of the ratio of microhardness to the Young's modulus of Ti-12Mo-13Nb alloy through microstructure changes10.1016/j.msec.2013.04.015 ↗
22. Mechanical Characterization of Ti-12Mo-13Nb Alloy for Biomedical Application Hot Swaged and Aged10.1590/1516-1439.329614 ↗
23. Control of the Microhardness to Young Modulus Ratio by Mechanical Processing of a Ti-10Mo-20Nb Alloy10.1590/1516-1439.343514 ↗
24. Effect of Hot Swaging on Microstructure and Properties of Aged Ti-10Mo-20Nb Alloy10.4028/www.scientific.net/MSF.869.952 ↗
25. POWDER CELL: a program for the representation and manipulation of crystal structures and calculation of the resulting X-ray powder patterns10.1107/S0021889895014920 ↗
26. Villars P · 1991
27. 1995
28. The omega phase transformation in titanium alloys as an example of displacement controlled reactions10.1016/0001-6160(71)90047-2 ↗
29. Theoretical Calculation of Absolute Radii of Atoms and Ions. Part 1. The Atomic Radii10.3390/i3020087 ↗
30. α' Type Ti-Nb-Zr alloys with ultra-low Young's modulus and high strength10.1016/j.pnsc.2013.11.005 ↗
31. Development of Low Rigidity β-type Titanium Alloy for Biomedical Applications10.2320/matertrans.43.2970 ↗
32. Froes FH · 2015
33. Al Addition on ω Precipitation and Age Hardening of Ti-Al-Mo-Fe Alloys10.1007/s11661-016-3386-x ↗
34. Implant biomaterials: A comprehensive review10.12998/wjcc.v3.i1.52 ↗
35. Gabriel SB · 2008