The Influences of Martensitic Transformations on Cavitation-Erosion Damage Initiation and Pitting Resistance of a Lean Austenitic Stainless Steel
Source abstract
Abstract
This paper looks into the influences of martensitic transformations on the cavitation-erosion (CE) damage initiation mechanism and pitting corrosion resistance of a lean austenitic stainless steel. The ε and α' martensites are prime sites of CE damage initiation for this steel, whereas grain boundaries are more favourable damage initiation sites for other similar steels. The profusion of ε and α' results in fast surface roughening during the CE process, which may cause a compromise in performance when this steel (or similar steels that have the same CE damage mechanism) is used for such applications as hydro-machinery or piping. ε and α' also detrimentally affect the pitting resistance of this steel and so they are expected to affect CE resistance adversely due to the synergism between CE and corrosion.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Erosion and Abrasive Machining · Non-Destructive Testing Techniques · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Macau, Macau
University of Macau, Macau; University of Macau, Macau
References (23)
Show source-provided references
1. Nagaya Y · 2009 · 1
2. Failure analysis of a Pelton turbine manufactured in soft martensitic stainless steel casting10.1016/j.engfailanal.2010.09.005 ↗
3. 1994
4. Khatak HS · 2002
5. Improvement in cavitation erosion resistance of AISI 316L stainless steel by friction stir processing10.1016/j.apsusc.2014.04.132 ↗
6. Laser cladding of austenitic stainless steel using NiTi strips for resisting cavitation erosion10.1016/j.msea.2005.04.013 ↗
7. Microstructure and corrosion characteristics of 304 stainless steel laser-alloyed with Cr-CrB210.1016/j.apsusc.2014.01.011 ↗
8. Improvement of the cavitation erosion resistance of an AISI 304L austenitic stainless steel by high temperature gas nitriding10.1016/j.msea.2004.05.003 ↗
9. Martensitic transformation induced by cold deformation of lean duplex stainless steel UNS S3230410.1590/S1516-14392013005000157 ↗
10. Austenitic stainless steels at cryogenic temperatures: The compositional dependence of the Ms10.1016/0011-2275(81)90026-6 ↗
11. Deformation induced martensitic transformation in a 201 modified austenitic stainless steel10.1016/j.matchar.2009.02.001 ↗
12. Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel10.1016/j.msea.2011.07.011 ↗
13. Effects of Ni and Mn on the Cavitation Erosion Resistance of Fe-Cr-C-Ni/Mn Austenitic Alloys10.1007/s11249-013-0231-x ↗
14. Damage mechanism of cavitation erosion in austenite→martensite phase transformable Fe-Cr-C-Mn/Ni alloys10.1016/j.wear.2013.12.015 ↗
15. Effects of strain induced martensitic transformation on the cavitation erosion resistance and incubation time of Fe-Cr-Ni-C alloys10.1016/j.wear.2011.08.011 ↗
16. Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution10.1016/S0921-5093(00)00899-6 ↗
17. Effect of deformation-induced martensite on the pit propagation behavior of 304 stainless steel10.1108/00035590410560921 ↗
18. Cavitation erosion resistance of high interstitial CrMnCN austenitic stainless steel10.1016/j.wear.2012.12.050 ↗
19. Cavitation wear behaviour of austenitic stainless steels with different grain sizes10.1016/j.wear.2004.03.024 ↗
20. Effects of grain size on the properties of a low nickel austenitic stainless steel10.1023/A:1027470917858 ↗
21. Revealing the relationship between grain size and corrosion rate of metals10.1016/j.scriptamat.2010.08.035 ↗
22. Effect of grain refinement on thermal stability of metastable austenitic steel10.2320/matertrans.45.2245 ↗
23. Austenite grain size and the martensite-start temperature10.1016/j.scriptamat.2008.11.043 ↗