journal article·2021Open access

Investigation on Internal Crack Defects in Medium Carbon Steel by Soft Reduction

Naqash Ali, Liqiang Zhang, Hongwei Zhou, Aonan Zhao, Chaojie Zhang, Kaixuan Fu, Jinqi Cheng

Materials Research· Volume 24· Issue 3

Abstract

This paper investigated the effect of soft reduction amount increasing from 1-4mm with a cooling time of 120s and 180s to reduce the internal crack defects by analyzing the microstructure, crack morphology, extent and nature of grain boundary ferrite, centre macrosegregation, and fracture surfaces in medium carbon steel. It was found that the large extent of grain boundary ferrite with coarse morphology weakens the bonding force of the PAGB and makes it brittle with the initiation of micro-cracks. The sever centre carbon macrosegregation of 1.3 takes place at cooling time of 180s with different reduction amounts, which becomes homogeneous at cooling time of 120s. The results show that the length of inter-granular and trans-granular cracks reaches 20mm with the carbon macrosegregation index of 1.3. The carbon macrosegregation index of 1.3 with a small fraction of 15% is enough to deteriorate the centre macrostructure of the ingot. The cleavage facet size of fracture surfaces is remarkably decreased below 100um at soft reduction parameters of 2mm/120s, 3mm/120s, and 4mm/120s with micro-cracks less than 100um, which reveals that the microstructure of specimens with these soft reduction parameters is more resistant to the cracks propagation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Anhui University of Technology, China

Anhui University of Technology,, China

References (25)

Show source-provided references
1. Analysis and application of soft reduction amount for bloom continuous casting process10.2355/isijinternational.54.504 ↗
2. Macrosegregation quality criteria and mechanical soft reduction for central quality problems in continuous casting of steel
3. Using a two-phase columnar solidification model to study the principle of mechanical soft reduction in slab casting10.1007/s11661-011-0940-4 ↗
4. Influence of soft reduction on the fluid flow, porosity and center segregation in CC high carbon- and stainless steel blooms10.2355/isijinternational.ISIJINT-2017-534 ↗
5. Investigation of reduction pretreatment process for continuous casting10.1016/j.jmatprotec.2015.08.005 ↗
6. Analysis on morphology and stress concentration in continuous casting bloom to learn the formation and propagation of internal cracks induced by soft reduction technology10.1080/03019233.2018.1556911 ↗
7. Coordinating optimisation of F-EMS and soft reduction during bloom continuous casting process for special steel10.1080/03019233.2017.1323394 ↗
8. Improving inner quality in continuous casting rectangular billets: comparison between mechanical soft reduction and final electromagnetic stirring10.1007/s12666-015-0742-2 ↗
9. Formation of internal cracks during soft reduction in rectangular bloom continuous casting10.1007/s12613-012-0510-9 ↗
10. Analysis and control of central cracks in the bloom continuous casting of microalloy 49MnVS3 steel10.1080/03019233.2016.1228571 ↗
11. Principles of billet soft-reduction and consequences for continuous casting10.2355/isijinternational.46.1839 ↗
12. Effect of the roll surface profile on centerline segregation in soft reduction process10.2355/isijinternational.52.1266 ↗
13. Formation of internal cracks in steel billets during soft reduction10.1016/S1005-8850(08)60023-7 ↗
14. Analysis of the off-corner subsurface cracks of continuous casting blooms under the influence of soft reduction and controllable approaches by a chamfer technology10.1051/metal/2018102 ↗
15. Research of 50Mn2V continuous casting slab transverse cracking during its retarded cooling process10.1016/j.engfailanal.2012.12.012 ↗
16. In-situ observation on the growth of Widmanstätten sideplates in an Fe – C – Mn steel10.1016/j.matchar.2013.11.002 ↗
17. EBSD analysis of relationship between microstructural features and toughness of a medium-carbon quenching and partitioning bainitic steel10.1007/s11665-017-3052-5 ↗
18. Effects of rare earth elements on inclusions and impact toughness of high-carbon chromium bearing steel10.1016/j.jmst.2019.01.015 ↗
19. Formation of Widmanstätten ferrite at very high temperatures in the austenite phase field10.1016/j.actamat.2016.02.062 ↗
20. Phase transformations contributing to the properties of modern steels
21. Improvement of center segregation in high-carbon steel billets using soft reduction10.1016/S1005-8850(06)60100-X ↗
22. On the formation of macrosegregation and interdendritic cracks during dendritic solidification of continuous casting of steel10.1007/s11663-013-9911-z ↗
23. Effect of interlamellar spacing on fracture toughness of nano-structured pearlite10.1016/j.msea.2017.08.115 ↗
24. Analysis of grain growth and morphology of bainite in medium-carbon spring steel
25. Influence of microstructure on strength and ductility in fully pearlitic steels10.3390/met6120318 ↗