Mechanical and Microstructural Response of an Aluminum Nanocomposite Reinforced with Carbon-Based Particles
Source abstract
Abstract
The present work deals with the study of some aluminum (Al) composites reinforced with metallized-graphite (MG) particles prepared by mechanical milling and powder metallurgy routes. Density, morphology evolution and mechanical performance of composites were investigated as a function of MG concentration and milling time. The as-milled powders were characterized by X-ray diffraction and optical/electron microscopy; meanwhile, the mechanical testing was carried out on cylindrical specimens prepared from powders by powder metallurgy. Evidence reveals that high-energy ball milling induce a homogeneous dispersion of graphite nanoparticles in the Al matrix; this is related to an enhancement of hardness and strength response of studied composites. The composite sample with 0.5% MG addition (in weight) reached an increase of 40% on hardness and 50% on strength (compared with pure Al sample); nevertheless an adverse effect was observed with longer milling and/or higher MG concentration.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centro de Investigación en Materiales Avanzados, Mexico
Centro de Investigación en Materiales Avanzados, Mexico; University of Houston, USA
University of Houston, USA
Universidad La Salle Chihuahua, Mexico
References (28)
Show source-provided references
1. A reliability based stress-life evaluation of aluminium-graphite particulate composites10.1016/j.matdes.2007.01.013 ↗
2. Wetting and oxidation during ultrasonic soldering of an alumina reinforced aluminum-copper-magnesium (2024 Al) matrix composite10.1016/j.compositesa.2011.12.006 ↗
3. Effect of silicon carbide particulates on wear resistance of graphitic aluminium matrix composites10.1016/j.matdes.2010.04.053 ↗
4. Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates10.1016/j.compscitech.2010.06.013 ↗
5. Abrasive wear of Al2O3-reinforced aluminium-based MMCs10.1016/S0266-3538(01)00131-2 ↗
6. Comparison on abrasive wear of SiCrFe, CrFeC and Al2O3 reinforced Al2024 MMCs10.1016/j.triboint.2006.04.008 ↗
7. Evaluation of thermal stability of ultrafine grained aluminium matrix composites reinforced with carbon nanotubes10.1016/j.compscitech.2011.09.001 ↗
8. Metal matrix composites: production by the stir casting method10.1016/S0924-0136(99)00118-1 ↗
9. Gudlur P, Boczek A, Radovic M, Muliana A. On characterizing the mechanical properties of aluminum-alumina composites10.1016/j.msea.2013.10.053 ↗
10. Preparation, microstructure and properties of Al-Al4C3 system produced by mechanical alloying10.1016/j.matdes.2004.11.012 ↗
11. Characterization of aluminum/graphite particulate composites synthesized using a novel method termed "in-situ powder metallurgy"10.1016/S0921-5093(04)00876-7 ↗
12. Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024-graphite composites produced by in situ powder metallurgy method10.1016/j.wear.2008.05.013 ↗
13. Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use10.1016/j.powtec.2010.12.001 ↗
14. Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: Microstructure, mechanical properties and deformation behavior10.1016/j.msea.2013.03.022 ↗
15. Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites10.1016/j.compscitech.2010.05.004 ↗
16. Texture analysis of a friction stir welded ultrafine grained Al-Al2O3 composite produced by accumulative roll-bonding10.1016/j.jallcom.2014.07.029 ↗
17. Compressive behavior of CNT-reinforced aluminum composites using molecular dynamics10.1016/j.compscitech.2013.09.027 ↗
18. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
19. Effect of carbon nanotube damage on the mechanical properties of aluminium-carbon nanotube composites10.1016/j.jallcom.2014.03.174 ↗
20. High-temperature deformation behavior of carbon nanotube (CNT)-reinforced aluminum composites and prediction of their high-temperature strength10.1016/j.compositesa.2014.09.008 ↗
21. Nanostructured Al/Al4C3 composites reinforced with graphite or fullerene and manufactured by mechanical milling and spark plasma sintering10.1016/j.matchemphys.2011.12.017 ↗
22. Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites10.1016/S0921-5093(01)01817-2 ↗
23. The tribological characteristics of A356.2Al alloy/Gr(p) composites10.1016/j.wear.2004.05.015 ↗
24. Effect of metallic addition on mechanical properties in an aluminum-graphite composite synthesized by means of mechanical milling10.1016/j.jallcom.2009.10.256 ↗
25. 1992
26. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
27. Structural evolution during mechanical milling of nanometric and micrometric Al2O3 reinforced Al matrix composites10.1016/j.msea.2006.04.116 ↗
28. 6061 Al reinforced with zirconium diboride particles processed by conventional powder metallurgy and mechanical alloying10.1023/B:JMSC.0000007736.03608.e5 ↗