The Effect of Thickness on Aramid Fabric Laminates Subjected to 7.62 MM Ammunition Ballistic Impact
Source abstract
Abstract
Due to increasing improvement of weaponry and ammunition, attention is being given to the development of new materials that could more effectively resist to ballistic impact. In order to stop high energy bullets, with speed above 800 m/s, a high strength material is necessary. However, if just one material is used, then a relatively thick piece is required, which might affect negatively the wearer mobility. The objective of this work is to investigate the effect of thickness on the ballistic behavior of aramid fabric laminates, Kevlar®, hit by high energy bullet. The purpose is to find the minimum thickness to avoid perforation. Ballistic tests using conventional 7.62 mm ammunition were performed according to standard procedures. The macro and microscopic aspects of the target specimens were evaluated. The results showed a change in the ballistic behavior of the laminates as their thickness increased. It was found that until the laminate was able to capture the bullet, 96 layers (~50 mm) were required. This is significantly higher than the necessary thickness for a multilayered armor to stop the same 7.62 mm bullet.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Mechanical Behavior of Composites · Transportation Safety and Impact Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto Militar de Engenharia, Brazil; Serviço Nacional de Aprendizagem Industrial do Estado do Rio de Janeiro, Brazil
Instituto Militar de Engenharia, Brazil
References (15)
Show source-provided references
1. Cooper G · 2005 · 6710.1007/1-84628-060-5_4 ↗
2. Body Armor Technology: A Review of Materials, Construction Techniques and Enhancement of Ballistic Energy Absorption10.4028/www.scientific.net/AMR.488-489.806 ↗
3. Composite armour - A review
4. Ballistic Impact of Dry Woven Fabric Composites: A Review10.1115/1.2821711 ↗
5. Recent Trends in Ballistic Protection10.14355/tlist.2014.03.007 ↗
6. Effect of Velocity of the Structure-Dependent Tension Wave Propagation on Ballistic Performance of Aramid Woven Fabrics
7. Ballistic impact into fabric and compliant composite laminates10.1016/S0263-8223(03)00029-1 ↗
8. Unlocking Function of Aramid Fibers in Multilayered Ballistic Armor10.1007/s11661-014-2678-2 ↗
9. Ballistic performance of armour ceramics: Influence of design and structure. Part 110.1016/j.ceramint.2010.05.021 ↗
10. Novel ballistic ramie fabric composite competing with KevlarTM fabric in multilayered armor10.1016/j.matdes.2016.02.024 ↗
11. Use of body armor protection with fighting load impacts soldier performance and kinematics10.1016/j.apergo.2014.07.015 ↗
12. 2008
13. Multilayered and Multidirectionally-stitched Aramid Woven Fabric Structures: Experimental Characterization of Ballistic Performance by Considering the Yarn Pull-out Test10.1177/0040517510365954 ↗
14. Properties of yarn pull-out in para-aramid fabric structure and analysis by statistical model10.1016/j.compositesa.2011.08.018 ↗
15. Experimental determination of ballistic performance of newly developed multiaxis non-interlaced/non-Z E-glass/polyester and 3D woven carbon/epoxy composites with soft backing aramid fabric structures10.1177/0040517510383613 ↗