journal article·2024Open access

Preparation and Characterization of Geopolymers Obtained from Alkaline Activated Hollow Brick Waste

Lauren Rayna Lima Colnago, Ana Karla Vieira Santos, Bruno dos Santos Potensa, Felipe Pires Chaves, Gleyson Tadeu de Almeida Santos, Agda Eunice de Souza, Silvio Rainho Teixeira

Materials Research· Volume 27· Issue suppl 2

Abstract

Geopolymers are inorganic polymers obtained through the alkaline activation of aluminosilicates. Due to their cementitious properties, they are being studied as a sustainable alternative to Portland cement. Red ceramic waste (RCW), being a source of silica and alumina, can serve as a precursor for producing geopolymers. In this work, we evaluated the feasibility of producing geopolymers from hollow brick (HB) and hydrated lime, using only sodium hydroxide as an alkaline activator. The test specimens were prepared replacement HB by up to 30 wt% of hydrated lime, aiming to evaluate the compressive strength after 7 and 28 curing days of the geopolymer produced. The results showed that samples with 30 wt% of hydrated lime, achieved the highest compressive strength (11.26 MPa) after 28 days of curing, although all values found were above the limit established by Brazilian standards for modular geopolymer bricks. The results therefore show a sustainable and widely viable implementation alternative to reduce the environmental impacts caused by the production of Portland cement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Estadual Paulista, Brasil

References (22)

Show source-provided references
1. 2022
2. 2023
3. Maccarini HS · 2015
4. Properties of geopolymers sourced from construction and demolition waste: a review
5. Chemical fundamentals of geopolymers in sustainable construction10.1016/j.mtsust.2024.100842 ↗
6. Development of sustainable geopolymer with excavation soil powder as precursor: cementitious properties and thermal-activated modification
7. Effect of silica fume on the efflorescence, strength, and micro-properties of one-part geopolymer incorporating sewage sludge ash10.1016/j.conbuildmat.2024.136840 ↗
8. Davidovits J · 1994
9. Geopolymers: ceramic-like inorganic polymers
10. Fly ash-based geopolymer: clean production properties and applications10.1016/j.jclepro.2016.03.019 ↗
11. Technological and microstructural perspective of the use of ceramic waste in cement-based mortars
12. Effect of firing temperature on porous ceramic properties fabricated by Moroccan red clay and oil shale
13. Longhi MA · 2019
14. Partial replacement of metakaolin with red ceramic waste in geopolymer10.1016/j.ceramint.2020.09.191 ↗
15. Geopolymer using different size fractions of recycled brick-based mixed demolition waste
16. Mechanical and thermal properties of geopolymers derived from metakaolin with iron mine waste10.1016/j.clay.2024.107452 ↗
17. Utilization of various ceramic waste as fine aggregate replacement into fly ash-based geopolymer10.1016/j.matlet.2023.135651 ↗
18. 2012
19. Gonçalves LF. C. · 2022
20. Phase and morphology evolution of calcium carbonate precipitated by carbonation of hydrated lime10.1007/s10853-012-6535-7 ↗
21. Geopolymer/PEG Hybrid materials synthesis and investigation of the polymer influence on microstructure and mechanical behavior10.1590/1516-1439.342814 ↗
22. FT-IR and 29Si-NMR for evaluating aluminium–silicate precursors for geopolymers10.1617/s11527-014-0432-2 ↗