Characterization of Artificial Stone Developed with the Incorporation of Granite and Mirror Wastes in an Epoxy Matrix
Source abstract
Abstract
The objective of this research was to produce artificial stone plates based on granite and mirror wastes and epoxy matrix, by vibration, compression, and vacuum and to characterize them. Plates were manufactured with 15%wt epoxy resin and 85% of aggregates in the proportion of 1/3 of granite waste from Ocre Itabira gray granite and 2/3 of mirror waste. The apparent density, water absorption, and apparent porosity values were 2.22 g/cm3, 0.11%, and 0.25%, respectively, the flexural strength was 34.36 MPa, abrasive wear after a 1000m track was 2.28mm and the breaking height in the impact resistance test was 0.45m. In addition, the stone was resistant to several staining agents. Therefore, the technical viability of the material developed was verified, with results compatible with studies already carried out in the area, making it possible to apply it as coatings and countertops in civil construction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Estadual do Norte Fluminense Darcy Ribeiro, Brasil; Instituto Federal do Espírito Santo, Brasil
Universidade Estadual do Norte Fluminense Darcy Ribeiro, Brasil
References (36)
Show source-provided references
1. A new technology of transforming recycled glass waste to construction components10.1016/j.conbuildmat.2021.125539 ↗
2. 2021
3. Vidal FWH · 2013
4. Assessment of the recycling potential of stone processing plant wastes based on physicochemical features and market opportunities10.1016/j.jclepro.2021.128678 ↗
5. 2021
6. Artificial stone slab production using waste glass, stone fragments, and vacuum vibratory compaction10.1016/j.cemconcomp.2008.03.004 ↗
7. Physical and mechanical evaluation of artificial marble produced with dolomitic marble residue processed by diamond-plated bladed gang-saws10.1016/j.jmrt.2018.02.001 ↗
8. Novel artificial ornamental stone developed with quarry waste in the epoxy composite
9. Temperature effects on the mechanical behavior of engineered stones10.1016/j.conbuildmat.2010.06.042 ↗
10. Mechanical and physical investigation of an artificial stone produced with granite residue and epoxy resin10.1177/0021998320968137 ↗
11. 2021
12. Physical and mechanical characterization of artificial stone with marble calcite waste and epoxy resin
13. Production and characterization of a novel artificial stone using brick residue and quarry dust in epoxy matrix10.1016/j.jmrt.2018.08.012 ↗
14. Artificial stone production using iron ore tailing (IOT)10.1590/0366-69132020663782854 ↗
15. Engineered stone produced with glass packaging waste, quartz powder, and epoxy resin10.3390/su14127227 ↗
16. Incorporation of industrial glass waste into polymeric resin to develop artificial stones for civil construction10.1007/s13369-021-06071-y ↗
17. Comparison between synthetic and biodegradable polymer matrices on the development of quartzite waste-based artificial stone10.3390/su14116388 ↗
18. Development of epoxy matrix artificial stone incorporated with intering residue from steel making industry10.1590/1516-1439.367514 ↗
19. Carvalho EAS · 2021 · 43510.1007/978-3-030-65493-1_43 ↗
20. Gomes MLPM · 2019 · 23
21. Development of sustainable eggshell waste- polyester resin composite material for using as artificial rock
22. Development of composite slabs of marble powder embedded epoxy resin10.1016/j.matpr.2018.02.289 ↗
23. Analytical and experimental investigation on magnetorheological behavior of CoFe2O4-rGOincorporated epoxy fluid composites10.1007/s42114-019-00086-8 ↗
24. Reuse of waste material from decorative quartz solid surfacing in the manufacture of hot bituminous mixes10.1016/j.conbuildmat.2009.09.004 ↗
25. Production of synthetic ornamental marble as a marble waste added polyester composite10.4028/www.scientific.net/MSF.775-776.341 ↗
26. Fabrication of artificial stone from marble residue by resin transfer molding10.4028/www.scientific.net/MSF.775-776.336 ↗
27. 2016
28. 2020
29. 2015
30. 2012
31. 2017
32. Rodrigues EP · 2020
33. 2015
34. Sardou Fo R · 2013
35. Effects of powder concentration and type of resin on the performance of marble composite structures10.1016/j.conbuildmat.2008.09.005 ↗
36. Interface effects on mechanical properties of particle reinforced composites10.1016/j.dental.2003.12.001 ↗