journal article·2015-11-03Open access

Mechanical and Durability Performance of Polyacrylonitrile Fiber Reinforced Concrete

Sheng-jun Fan

Materials Research· Volume 18· Issue 6

Abstract

In this paper, the impact toughness, autogenous shrinkage, chloride penetration resistance, permeability resistance and abrasion resistance performance of prepared concrete reinforced with Polyacrylonitrile fiber (PAN fiber) were researched. The PAN fiber volume concentration percentages of cement were 0, 0.5%, 1.0%, 1.5% and 2.0%, respectively. The results showed that with the addition of PAN fiber, the toughness and durability performance were improved. Compared to the reference sample, the impact energy was significantly improved. The absorbed energy prevent specimens from deterioration by the mechanisms of matrix cracking, PAN fiber/matrix interface debonding, fiber pull-out and fiber rupture. Meanwhile, the autogenous shrinkage, chloride penetration resistance, permeability resistance and abrasion resistance performance were improved. Mercury intrusion porosimetry (MIP) technique found that concrete with PAN fiber has a better pore characterization. Among these specimens, the maximum improvement was obtained with 1.0 vol.% PAN fiber.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Advanced ceramic materials synthesis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Xi'an University of Architecture and Technology, China

References (26)

Show source-provided references
1. Carbon nanotubes and carbon nanofibers for enhancing the mechanical properties of nanocomposite cementitious materials10.1061/(ASCE)MT.1943-5533.0000266 ↗
2. Experimental and numerical analyses of long carbon fiber reinforced concrete panels exposed to blast loading10.1016/j.ijimpeng.2013.01.006 ↗
3. High-toughness and durability performance characterization of concrete reinforced with polyvinyl alcohol fibers10.1166/mex.2014.1170 ↗
4. Acid–base properties of ion exchangers. III. Anion exchangers on the basis of polyacrylonitrile fiber10.1016/j.reactfunctpolym.2005.02.002 ↗
5. Adsorption of heavy metals onto activated carbons derived from polyacrylonitrile fiber10.1016/j.jhazmat.2010.04.069 ↗
6. Behaviors and mechanisms of copper adsorption on hydrolyzed polyacrylonitrile fibers10.1016/S0021-9797(02)00243-6 ↗
7. A comparison of reinforcement efficiency of various types of carbon nanotubes in polyacrylonitrile fiber10.1016/j.polymer.2005.08.092 ↗
8. A review of heat treatment on polyacrylonitrile fiber10.1016/j.polymdegradstab.2007.03.023 ↗
9. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects10.1016/j.conbuildmat.2010.03.012 ↗
10. Study on durability of freezing/thawing resistance of polyacrylonitrile fiber reinforced concrete
11. Thermoelectric percolation phenomena in carbon fiber-reinforced concrete10.1016/S0008-8846(98)00161-6 ↗
12. Permeability of cracked steel fiber-reinforced concrete10.1061/(ASCE)0899-1561(2002)14:4(355) ↗
13. Abrasion resistance of high-strength concrete in hydraulic structures10.1016/j.wear.2005.02.079 ↗
14. Chloride permeability and impact resistance of polypropylene-fiber-reinforced silica fume concrete10.1016/S0008-8846(98)00073-8 ↗
15. Impact resistance of fiber reinforced concrete at subnormal temperature10.1016/S0958-9465(98)00015-8 ↗
16. Mulheron M · 2015
17. Study on fracture behavior of polypropylene fiber reinforced concrete with bending beam test and digital speckle method10.12989/cac.2014.14.5.527 ↗
18. Shrinkage mitigation strategies in cement systems: a closer look at differences in sealed and unsealed behavior10.3141/2070-08 ↗
19. Autogenous shrinkage of concrete containing granulated blast-furnace slag10.1016/j.cemconres.2006.01.005 ↗
20. Effect of mineral filler type on autogenous shrinkage of self-compacting concrete10.1016/j.cemconres.2010.01.014 ↗
21. Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength10.1016/j.conbuildmat.2010.11.069 ↗
22. Testing and modelling chloride penetration into concrete10.1016/j.conbuildmat.2012.08.012 ↗
23. Effect of fiber type and content on properties of high-strength fiber reinforced self-consolidating concrete10.12989/cac.2014.14.3.299 ↗
24. Abrasion resistance of concrete micro-reinforced with polypropylene fibers10.1016/j.conbuildmat.2011.07.044 ↗
25. Estimation of strength, permeability and hydraulic diffusivity of pozzolana blendd concrete through pore size distribution10.3151/jact.11.230 ↗
26. Analysis of cement-bonded materials by multi-cycle mercury intrusion and nitrogen sorption10.1016/j.jcis.2009.05.029 ↗