journal article·2024Open access

Corrosion Behavior of As-Cladding Al0.8CrFeCoNiCu0.5Six High Entropy Alloys in 3.5% NaCl Solution

Yanzhou Li, Yan Shi, Hua Lin, Xiaohu Ji

Materials Research· Volume 27

Abstract

The corrosion behavior of Al0.8CrFeCoNiCu0.5Six (x=0, 0.2, 0.3) high-entropy alloy laser cladding coatings in a 3.5% NaCl solution was investigated using polarization tests, impedance spectroscopy, scanning electron microscopy, and energy dispersive spectroscopy. As the Si content increased, the over-passivation potential and the width of the passivation zone for the Al0.8CrFeCoNiCu0.5Six coating expanded, while the corrosion current density tended to decrease, enhancing the stability of the passivation film and the corrosion resistance of the coating. The Al0.8CrFeCoNiCu0.5 coating underwent selective corrosion, with some pitting corrosion distribution showing no apparent regularity. The Al0.8CrFeCoNiCu0.5Si0.2 coating exhibited a distinct grain profile with a tendency towards intergranular corrosion. The aggregation of Cu-rich and Al-Ni intergranular phases in the eutectic structure led to preferential erosion at the grain boundaries by corrosion ions in the Al0.8CrFeCoNiCu0.5Si0.2 coating. The Al0.8CrFeCoNiCu0.5Si0.3 coating presented corrosion pits, although their distribution did not display apparent regularity. The Al0.8CrFeCoNiCu0.5Six high-entropy alloy coating demonstrates superior corrosion resistance in solution compared to 5083 aluminum alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

West Anhui University, China; West Anhui University, China

Changchun University of Science and Technology, China; National Base of International Science and Technology Cooperation in Optics, China

References (24)

Show source-provided references
1. Tribology and high-temperature oxidation behaviors of NiCrBSiFe composite coatings on Ti6Al4V alloy by laser cladding10.1039/C5RA14732H ↗
2. Microhardness, wear resistance, and corrosion resistance of AlxCrFeCoNiCu high-entropy alloy coatings on aluminum by laser cladding
3. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
4. Compositional modifications to alter and suppress laves phases in AlxCrMoTayTi Alloys
5. Origin of high strength in the CoCrFeNiPd high-entropy alloy10.1080/21663831.2020.1739156 ↗
6. Mechanisms of chemical-reaction-induced tensile deformation of an Fe/Ni/Cr alloy revealed by reactive atomistic simulations10.1039/D2RA07039A ↗
7. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
8. Antibacterial activities of a novel Cu-bearing high-entropy alloy against multi-drug-resistant Acinetobacter baumannii and Staphylococcus aureus10.1007/s12598-021-01837-7 ↗
9. Effects of Cu-content and passivation treatment on the corrosion resistance of Al0.3CuxCoCrFeNi high-entropy alloys
10. Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys10.1016/j.msea.2010.07.049 ↗
11. Effects of Cu/Si on the microstructure and tribological properties of FeCoCrNi high entropy alloy coating by laser cladding
12. Phase assemblage and wear resistance of laser-cladding Al(0.8)FeCoNiCrCu(0.5)Si(x)high-entropy alloys on aluminum
13. The holes of Zn phosphate and hot dip galvanizing on electrochemical behaviors of multi-coatings on steel substrates10.3390/met12050863 ↗
14. Electrochemical behavior and compressive strength of Al-Cu/xCu composites in NaCl solution10.1007/s10008-020-04890-x ↗
15. Effects of scan rate on the potentiodynamic polarization curve obtained to determine the Tafel slopes and corrosion current density10.1016/j.corsci.2008.12.005 ↗
16. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
17. Electrochemical micro-couple mechanism based on Si and Mn segregations revealing the initiation of grain boundary dissolution for Q235 carbon steel10.1016/j.jiec.2022.12.019 ↗
18. Intergranular corrosion of an Al-Cu-Li alloy: the influence from grain structure10.1016/j.corsci.2022.110845 ↗
19. The effects of Zn segregation and microstructure length scale on the corrosion behavior of a directionally solidified Mg-25 wt.%Zn alloy10.1016/j.jallcom.2017.06.199 ↗
20. Electrochemical corrosion behavior of as-cast Zn-rich Zn-Mg alloys in a 0.06M NaCl solution10.20964/2017.06.37 ↗
21. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
22. Constant-phase-element behavior caused by resistivity distributions in films II. Applications10.1149/1.3499565 ↗
23. Corrosion inhibition potentials of some phosphovanadate-based glasses on mild steel in 1 M HCl10.1016/j.inoche.2021.108806 ↗
24. Laser additive synthesis of high entropy alloy coating on aluminum: corrosion behavior10.1016/j.matlet.2014.11.161 ↗