Influence of Build Direction and Post Processes on the Material and Part Attributes of Hard Resins Fabricated by Photopolymerization Based Additive Manufacturing
Source abstract
Abstract
This study aims to contribute to the scientific knowledge by investigating the influence of build direction and post-curing on the material and part attributes of acrylonitrile butadiene styrene (ABS-like) like resins by photopolymerization based additive manufacturing (AM). Specimens were manufactured in different build directions with the parameters that offer the highest density. Two groups of specimens, one as-built and the other post-cured, were subjected to dimensional inspections, surface characterization, fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), hardness measurements, tensile tests, bending tests, Charpy impact tests and the obtained values were reported and benchmarked. It has been observed that the change in the build direction significantly affects the surface roughness and the average surface roughness of the samples produced in the vertical plane is much higher than those produced in the horizontal plane. It was demonstrated that post-curing has a negligible effect on part dimensions and density. It increases hardness, tensile modulus and flexural modulus while reducing elongation and impact resistance. The effects of post-curing on chemical and thermal properties were also compared and it was determined that it improves the thermal stability. In the absence of post-curing, vertical as-built specimens were observed to have higher strength than their horizontal counterparts.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Eskisehir Technical University, Turkiye
References (34)
Show source-provided references
1. Progress in additive manufacturing on new materials: a review10.1016/j.jmst.2018.09.002 ↗
2. Martínez-García A · 2021 · 39510.1016/B978-0-12-818411-0.00013-6 ↗
3. Systematical review on the numerical simulations of laser powder bed additive manufacturing
4. Wohlers T · 2015
5. A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3D printing10.3390/polym13040598 ↗
6. The effect of triacrylate monomer structure on volume shrinkage and tensile properties of vat polymerization resins
7. Fundamentals and applications of 3D printing for novel materials10.1016/j.apmt.2017.02.004 ↗
8. Tough, stable spiroacetal thiol-ene resin for 3D printing10.1002/app.46259 ↗
9. 3D printing a mechanically-tunable acrylate resin on a commercial DLP-SLA printer
10. Schmidleithner C · 2018 · 1
11. Synthesis of photocurable cellulose acetate butyrate resin for continuous liquid interface production of three-dimensional objects with excellent mechanical and chemical-resistant properties10.1016/j.carbpol.2018.12.026 ↗
12. Mechanical characterization of 3D-printed polymers
13. A review on polymeric materials in additive manufacturing10.1016/j.matpr.2021.02.485 ↗
14. Carolo L · 2021
15. Strain rate dependent mechanical properties of 3D printed polymer materials using the DLP technique
16. Influence of printing direction on 3D printed ABS specimens10.30657/pea.2020.26.24 ↗
17. 2023
18. 2010
19. 2000
20. A parametric determination of bending and Charpy’s impact strength of ABS and ABS-plus fused deposition modeling specimens10.1007/s40964-019-00092-8 ↗
21. Surface texture and form characterization for powder bed additive manufacturing
22. FT-IR methodology (transmission and UATR) to quantify automotive systems10.1590/0104-1428.2412 ↗
23. Degradation classification of 3D printing thermoplastics using Fourier transform infrared spectroscopy and artificial neural networks10.3390/app8081224 ↗
24. Investigation of closed-loop manufacturing with acrylonitrile butadiene styrene over multiple generations using additive manufacturing10.1021/acssuschemeng.9b02368 ↗
25. Biobased acrylate photocurable resin formulation for stereolithography 3D printing10.1021/acsomega.7b01648 ↗
26. Compounding a high dielectric constant thermoplastic material for production of microwave photonic crystals through additive manufacturing
27. Stereolithography of (meth) acrylate‐based photocurable resin: thermal and mechanical properties10.1002/app.52248 ↗
28. Ribo MM · 2020
29. Anisotropy of photopolymer parts made by digital light processing10.3390/ma10010064 ↗
30. Vat photopolymerization additive manufacturing resins: analysis and case study
31. High-performance medical-grade resin radically reinforced with cellulose nanofibers for 3D printing10.1016/j.jmbbm.2022.105408 ↗
32. Strain rate dependent mechanical properties of 3D printed polymer materials using the DLP technique
33. Exceptional mechanical properties and heat resistance of photocurable bismaleimide ink for 3D printing10.3390/ma14071708 ↗
34. Impact strength of 3D-printed and conventional heat-cure and cold-cure denture base acrylic resins10.11607/ijp.7246 ↗