journal article·2024Open access

Performance Analysis of TiAlSiN Coated Tungsten Carbide End Milling Tool Subjected to Shallow and Deep Cryogenic Treatments

Nandu Babu, Kumar Velappan Nair, Keerthi Krishnan Kallorath, Selvakumar Arulprakasam, Sudeep Ullattil

Materials Research· Volume 27

Abstract

Cryogenic treatment enhances the properties of cutting tools. This study investigates the effects of shallow and deep cryogenic treatments to TiAlSiN coated tungsten carbide tool used in end milling of maraging steel C300. Experiments are conducted in a three axis CNC vertical milling machine at various spindle speeds using TiAlSiN coated tool without cryogenic treatment (UCT), shallow (SCT) and deep (DCT) cryogenically treated coated tools. The surface finish obtained during milling of slots, built-up edge of tools and the tool wear are investigated and compared. With an increase in spindle speed, SCT tool showed an improvement of 13.3% with UCT and 33.5% with DCT. Formation of built-up edge on the cutting tools are also evaluated and compared. Tool wear is quantified, in which SCT tool showed lowest tool wear in comparison with UCT and DCT tools.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

TKM College of Engineering Kollam, India

NSS College of Engineering Palakkad, India

Government Engineering College Wayanad, India

References (25)

Show source-provided references
1. Influence of cryogenic treatment on the tribological behaviour of AISI H21 tool steel10.1590/1980-5373-mr-2017-0745 ↗
2. Jointing of CFRP/5083 aluminum alloy by induction brazing: processing, connecting mechanism, and fatigue performance10.3390/coatings12101559 ↗
3. Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy10.1016/j.jclepro.2019.05.196 ↗
4. Effect of cryo-treated cutting tool end milling on custom 450 stainless steel10.3390/ma16134744 ↗
5. The effects of cryogenic treatment on the corrosion of AISI D3 steel10.1590/1516-1439.349914 ↗
6. A review on cryogenic treatment of tungsten carbide (WC-Co) tool material10.1080/10426914.2020.1843668 ↗
7. Effect of deep cryogenic treatment on microstructure, mechanical properties, and residual stress of AISI 52100 bearing steel
8. Effect of deep cryogenic treatment on the mechanical properties of tool steels10.1016/S0924-0136(01)00973-6 ↗
9. Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning10.1177/09544062211037373 ↗
10. Effect of deep cryogenic treatment on machinability and wear mechanism of TiAlN coated tools during dry turning10.1007/s12541-014-0384-z ↗
11. Effects of cryogenic treatment types on the performance of coated tungsten tools in the turning of AISI H11 steel10.1016/j.jmrt.2020.03.038 ↗
12. Effect of cutting conditions on wear performance of cryogenically treated tungsten carbide inserts in dry turning of stainless steel10.1016/j.triboint.2015.08.024 ↗
13. Evaluation of mechanical and metallurgical properties of cryo-treated tungsten carbide with 25% cobalt10.1016/j.matpr.2020.09.374 ↗
14. Effect of Ti content on the microstructure and mechanical properties of TiAlSiN nanocomposite coatings10.1016/j.ijrmhm.2016.06.005 ↗
15. Comparison of the tool life of tungsten carbides coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi method10.1016/S0924-0136(01)01152-9 ↗
16. Investigation on the performance of AlCrN and AlTiN coated cemented carbide inserts during end milling of maraging steel under dry, wet and cryogenic environments10.1016/j.jmapro.2019.05.021 ↗
17. Influence of deep cryogenic treatment on performance of cemented carbide (WC-Co) inserts during dry end milling of maraging steel10.1016/j.jmapro.2018.11.030 ↗
18. Effect of machining parameters on tool life and surface roughness of AISI 1040 dual phase steel
19. Study of the wear behaviour of TiAlSiN and TiAlN PVD coated tools on milling operations of pre-hardened tool steel10.1016/j.wear.2021.203695 ↗
20. Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys10.1016/j.surfcoat.2014.02.015 ↗
21. Flank wear and machining performance of cryogenically treated tungsten carbide inserts10.1080/10426914.2011.557128 ↗
22. Optimization of cryogenic treatment effects on the surface roughness of cutting tools10.3139/120.111427 ↗
23. Investigation of the effect on surface roughness of cryogenic process applied to cutting tool10.26706/ijaefea.2.7.20200602 ↗
24. Implications of cryogenic treatment on microstructure, phase formation, mechanical and tribological properties of tungsten carbide cutting bits with varying cobalt content for mining applications10.1016/j.ijrmhm.2023.106421 ↗
25. Microstructure evolution, phase formation, mechanical and tribological response of deep cryogenically treated hard WC-6% Co cutting bits10.1016/j.jmrt.2023.09.320 ↗